[1] 宋加.热镀锌板生产技术发展及相关问题探讨［J］.轧钢, 2009, 26(2): 39-43.

    SONG JIA.Technique development of hot dipped galvanized sheet steel and relative questions discussion［J］.Steel Rolling, 2009, 26(2): 39-43.

[2] 岑耀东.超薄锌层热镀锌板的研究进展［J］.材料热处理技术, 2012, 41(2): 152-156.

    CEN YAODONG.Research progress of ultra-thin zinc layer of hot galvanized sheet［J］.Material & Heat Treatment, 2012, 41(2): 152-156.

[3] 解亚丹, 贺志荣, 刘继拓, 等.热浸镀锌钝化工艺的研究进展［J］.材料保护, 2014, 47(9): 45-48.

    XIE YADAN, HE ZHIRONG, LIU JITUO, et al.Research progress of passivation technologies for hot-dip galvanizing coating［J］.Journal of Materials Protection, 2014, 47(9): 45-48.

[4] 段林勇.镀锌钢激光添粉焊接的锌行为控制机理研究［D］.长沙: 湖南大学, 2012: 1-2.

    DUAN LINYONG.Study on control mechanism of zinc behavior generated by laser welding galvanized steel with powder feeding［D］.Changsha: Hunan University, 2012: 1-2.

[5] 张屹, 李时春, 金湘中, 等.镀锌钢板激光焊接关键技术研究［J］.激光与光电子学进展, 2010, 47(7): 1-9.

    ZHANG QI, LI SHICHUN, JIN XIANGZHONG, et al.Key technology of laser welding of galvanized steel［J］.Laser & Optoelectronics Progress, 2010, 47(7): 1-9.

[6] 李明星, 胡治华, 陈铠.保护气体种类对镀锌板激光焊接性的影响［J］.激光杂志, 2006, 27(6): 72-73.

    LI MINGXING, HU ZHIHUA, CHEN KAI.The effect of shielding gas type on laser weld ability of galvanized steel［J］.Laser Journal, 2006, 27(6): 72-73.

[7] 魏元生. 镀锌板种类及其在车身上的应用［J］.汽车工艺与材料, 2011(9): 51-62.

    WEI YUANSHENG.The galvanized sheet type and its application in car body［J］.Automobile Technology & Material, 2011(9): 51-62.

[8] 孙晓东, 王松, 赵凯华, 等.激光切割技术国内外研究现状［J］. 金属铸锻焊技术, 2012, 41(9): 214-216.

    SUN XIAODONG, WANG SONG, ZHAO KAIHUA, et al.Research progress of laser cutting technology domestic and overseas［J］.Casting Forging Welding, 2012, 41(9): 214-216.

[9] 侯培红.激光切割薄硅钢片的工艺研究［J］.上海电机学院学报, 2015, 18(2): 77-81.

    HOU PEIHONG.Technology of Laser Cutting of Thin Silicon Steel Sheet［J］.Journal of SHANGHAI DIANJI University, 2015, 18(2): 77-81.

[10] 王威, 林尚扬, 徐良, 滕彬.中厚钢板大功率固体激光切割模式［J］.焊接学报, 2015, 36(4): 39-42.

    WANG WEI, LIN SHANGYANG, XU LIANG, YING BIN.Medium Plate High-Power Solid Laser Cutting Mode［J］.Transactions of the China Welding Institution, 2015, 36(4): 39-42.

[11] 陈聪, 高明, 顾云泽, 等.光纤激光切割铝合金薄板工艺特性研究［J］.中国激光, 2014, 41(6): 06030041-7.

    CHEN CONG, GAO MING, GU YUNZE, et al.Study on fiber laser cutting of aluminum alloy aheet［J］.Chinese Journal of Lasers, 2014, 41(6): 06030041-7.

[12] 徐国建, 李宏利, 杭争翔, 等.6 mm 碳钢板的激光切割性能［J］.激光与光电子学进展, 2014, 51(4): 1-6.

    XU GUOJIAN, LI HONGLI, HANG ZHENGXIANG, et al.Performance of 6 mm mild steel sheet laser cutting［J］.Laser & Optoelectronics Progress, 2014, 51(4): 1-6.

[13] 张书诚.CO2激光器切割加工中辅助气体参数对加工质量的影响［J］.南阳理工学院学报, 2011, 3(6): 63-66.

    ZHANG SHUCHENG.The effect on the auxiliary gas parameters in the processing of the laser cutter on the quality［J］.Journal of NANYANG Institute of Technology, 2011, 3(6): 63-66.

[14] 温鹏, 王威, 谭向虎, 等.激光能量和辅助气体对切割能力影响的数值模拟［J］.焊接学报, 2013, 34(4): 57-60.

    WEN PENG, WANG WEI, TAN XIANGHU, et al.Numerical simulation of effect of laser power and assistant gas on laser cutting ability［J］.Transactions of the China Welding Institution, 2013, 34(4): 57-60.