[1] 康喜范. 铁素体不锈钢[M]. 北京: 冶金工业出版社, 2012. 14-19.

    Kang Xifan. Ferritic Stainless Steel[M]. Beijing: Metallurgical Industry Press, 2012. 14-19.

[2] 魏欣, 董俊华, 佟健, 等. 温度对Cr26Mo1 超纯高铬铁素体不锈钢在3.5%NaCl 溶液中耐点蚀性能的影响[J]. 金属学报, 2012, 48(4): 502-507.

    Wei Xin, Dong Junhua, Tong Jian, et al.. Influence of temperature on pitting corrosion resistance of Cr26Mo1 ultra pure high chromium ferrite stainless steel in 3.5% NaCl solution[J]. Acta Metallurgica Sinica, 2012, 48(4): 502-507.

[3] 张永兰, 李亚江, 于衍志. 铁素体不锈钢焊接区域的组织特征[J]. 机械工程材料, 1994, 18(6): 14-16.

    Zhang Yonglan, Li Yajiang, Yu Yanzhi. Characteristics of microstructure in welding zone of the ferritic stainless steel[J]. Materials for Mechanical Engineering, 1994, 18(6): 14-16.

[4] 李扬, 胡绳荪, 申俊琦. 紫铜与316L不锈钢脉冲激光焊微观组织及力学性能[J]. 中国激光, 2014, 41(7): 0703008.

    Li Yang, Hu Shengsun, Shen Junqi. Microstructural characteristics and mechanical properties of pulsed Nd:YAG laser welding copper and 316L stainless steel[J]. Chinese J Lasers, 2014, 41(7): 0703008.

[5] 赵琳, 塚本进, 荒金吾郎, 等. 大功率光纤激光焊接过程中工艺参数对熔深和气孔的影响[J]. 中国激光, 2013, 40(11): 1103004.

    Zhao Lin, Tsukamoto Susumu, Arakane Goro, et al.. Influence of welding parameters on weld depth and porosity in high power fiber laser welding[J]. Chinese J Lasers, 2013, 40(11): 1103004.

[6] 吴东江, 张天武, 马广义, 等. 连续激光焊接Fe-Ni合金工艺参数对焊缝形貌的影响[J]. 中国激光, 2013, 40(3): 0303003.

    Wu Dongjiang, Zhang Tianwu, Ma Guangyi, et al.. Influence of welding parameters on the morphology of Fe-Ni alloy with continuous wave YAG laser[J]. Chinese J Lasers, 2013, 40(3): 0303003.

[7] 张红霞, 裴飞飞, 王志斌, 等. 热输入对超薄443铁素体不锈钢组织性能的影响[J]. 焊接学报, 2013, 34(4): 15-18.

    Zhang Hongxia, Pei Feifei, Wang Zhibin, et al.. Effect of heat input on microstructure and mechanical properties of ultra-thin 443 ferritic stainless steel[J]. Transactions of the China Welding Institution, 2013, 34(4): 15-18.

[8] J C Villafuerte, H W Kerr, S A David. Mechanisms of equiaxed grain formation in ferritic stainless steel gas tungsten arc welds[J]. Materials Science and Engineering, 1995, 194: 187-191.

[9] 韩国明, 李建强, 闫青亮. 不锈钢激光焊温度场的建模与仿真[J]. 焊接学报, 2006, 27(3): 105-108.

    Han Guoming, Li Jianqiang, Yan Qingliang. Modeling and simulation of the laser welding temperature field of stainless steel[J]. Transactions of the China Welding Institution, 2006, 27(3): 105-108.

[10] S Kou, Y Le. Welding parameters and the grain structure of weld metal-A thermodynamic consideration[J]. Metallurgical Transactions A, 1988, 19(4): 1075-1082.

[11] C Y Cui, X G Cui, X D Ren, et al.. Microstructure and microhardness of fiber laser butt welded joint of stainless steel plates[J]. Materials and Design, 2013, 49: 761-765.

[12] 张婷婷, 王文先, 闫志峰, 等. 热输入对445J2 超纯铁素体不锈钢焊接接头显微组织和力学性能的影响[J]. 太原理工大学学报, 2014, 45(2): 210-214.

    Zhang Tingting, Wang Wenxian, Yan Zhifeng, et al.. Effect of heat input on the microstructure and mechanical properties of 445J2 ultra-pure ferritic stainless steel welding joints[J]. Journal of Taiyuan University of Technology, 2014, 45(2): 210-214.