轴承滚子凸度轮廓的最小二乘拟合与误差评定
雷贤卿, 张亚东, 马文锁, 户璐卿, 左孝林. 轴承滚子凸度轮廓的最小二乘拟合与误差评定[J]. 光学 精密工程, 2018, 26(8): 2039.
LEI Xian-qing, ZHANG Ya-dong, MA Wen-suo, HU Lu-qing, ZUO Xiao-lin. Least square fitting and error evaluation of the convex contour of bearing roller[J]. Optics and Precision Engineering, 2018, 26(8): 2039.
[1] Raja Kountanya, Vijay Jagdale. Frictionless elastic contact of crowned roller: Approximate analytical calculation of compliance and contact area[J]. Journal of Engineering Tribology, 2015,229(10) : 1206-1213.
[2] JUAN X U, NIU Q, HUAMING Q I, et al.. A research on the contact stress of roller bearing based on crowning analysis[J]. Computer Aided Drafting Design & Manufacturing, 2012, 22(2): 55-58.
[3] WEI Z, XU W, TAO B. Crown Shaping Technique of Bearing Raceway by Electrochemical Mechanical Machining[J]. International Journal of Electrochemical Science, 2013, 8(2): 2238-2253.
[4] Bogdan Warda , Agnieszka Chudzik. Effect of ring misalignment on the fatigue life of the radial cylindrical roller bearing[J]. International Journal of Mechanical Sciences,2016,111-112(6): 1-11.
[5] 夏新涛, 董淑静, 孙立明. 滚子凸度偏移对圆锥滚子轴承接触应力的影响[J]. 轴承, 2015(9): 4-6.
XIA X T, DONG S J, SUN L M. Effects of Convexity Offset of Rollers on Contact Stress of Tapered Roller Bearings[J]. Bearing, 2015(9): 4-6. (in Chinese)
[6] LIU Z T, YANG J X, ZHAO B. Study on Roundness Error Evaluation with Least-Squares Method Based on Nonlinear Optimization[J]. Advanced Materials Research, 2013, 765-767: 755-758.
[7] 张跃强,苏昂,刘海波,等.基于多直线对应和加权最小二乘的位姿估计[J].光学 精密工程,2015,23(06): 1722-1731.
ZHANG Y Q, SU A, LIU H B, et al.. Pose estimation based on multiple line hypothesis and iteratively reweighted least squares[J]. Optics and Precision Engineering, 2015,23(06): 1722-1731. (in Chinese)
[8] GU T, LIN S, FANG B, et al.. An improved total least square calibration method for straightness error of coordinate measuring machine[J]. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, 2016, 230(9).
[9] 黄富贵,崔长彩.评定直线度误差的最小二乘法与最小包容区域法精度之比较[J].光学精密工程,2007(06): 889-893.
HUANG F G, CUI C P, SUN L M. Comparison of evaluating precision of straightness error between least square method and least envelope zone method[J]. Opt. Precision Eng., 2007(06): 889-893. (in Chinese)
[10] 穆治亚,艾华,樊孝贺,et al..采用整体最小二乘法的条纹图配准法[J].中国光学,2016,9(06): 625-632.
MU ZH Y,AI H,FAN XH,et al..Inference fringe image registration using total least square method[J]. Chinese Optics, 2016, 9(6): 625-632. (in Chinese)
[11] BENKO G, KO’S G, VARADY T, et al.. Constrained Fitting in Revers Engineering[J]. Computer aided Geomeerric Design, 2002,19(3): 173-205.
[12] 刘云峰, 柯映林. 反求工程中切片数据处理及断面特征曲线全局优化技术[J]. 机械工程学报, 2006, 42(3): 124-129.
LIU Y F, KE Y L. Slicing Data Processing And Global Optimization of Feature Curve in Reverse Engineering [J]. Chinese Journal of Mechanical Engineering, 2006, 42(3): 124-129. (in Chinese)
[13] 田留德,赵建科,周艳,等.小范围回转轴系测角误差测试方法[J].光子学报,2017,46(11): 131-137.
TIAN L D, ZHAO J K, ZHOU Y, et al.. Test Method of Angle Error of Limited Rotation Axis System.[J]. Acta Photonica Sinica, 2017, 46(11): 131-137. (in Chinese)
[14] 强怀博, 吴琼, 王建华. 圆弧轮廓圆度的评定与误差分析[J]. 工具技术, 2012, 46(3): 74-76.
QIANG H B, WU Q, WANG J H. Evaluation Method on Roundness of Arc Contours and Analysis of Error[J]. Tool Engineering, 2012, 46(3): 74-76. (in Chinese)
[15] 朱嘉, 李醒飞, 谭文斌,等. 基于圆心约束最小二乘圆拟合的短圆弧测量[J]. 光学 精密工程, 2009, 17(10): 2486-2492.
雷贤卿, 张亚东, 马文锁, 户璐卿, 左孝林. 轴承滚子凸度轮廓的最小二乘拟合与误差评定[J]. 光学 精密工程, 2018, 26(8): 2039. LEI Xian-qing, ZHANG Ya-dong, MA Wen-suo, HU Lu-qing, ZUO Xiao-lin. Least square fitting and error evaluation of the convex contour of bearing roller[J]. Optics and Precision Engineering, 2018, 26(8): 2039.