激光冲击316L不锈钢焊接件的模拟分析与试验研究
卢海飞, 鲁金忠, 张文泉, 罗开玉. 激光冲击316L不锈钢焊接件的模拟分析与试验研究[J]. 激光与光电子学进展, 2017, 54(10): 101411.
Lu Haifei, Lu Jinzhong, Zhang Wenquan, Luo Kaiyu. Simulation Analysis and Experimental Study of 316L Stainless Steel Weldments Processed by Laser Shock Peening[J]. Laser & Optoelectronics Progress, 2017, 54(10): 101411.
[1] 王若林, 高巍, 叶肖伟, 等. 焊接结构疲劳破坏的若干问题[J]. 武汉大学学报(工学版), 2013,46(2): 194-198.
Wang Ruolin, Gao Wei, Ye Xiaowei, et al. Some issues of fatigue failure of welded structures[J]. Engineering Journal of Wuhan University, 2013, 46(2): 194-198.
[2] Yousefieh M, Shamanian M, Saatchi A. Influence of heat input in pulsed current GTAW process on microstructure and corrosion resistance of duplex stainless steel welds[J]. Journal of Iron and Steel Research International, 2011, 18(9): 65-69.
[3] Ding J H, Zhang L, Li D P, et al. Corrosion and stress corrosion cracking behavior of 316L austenitic stainless steel in high H2S-CO2-Cl- environment[J]. Journal of Materials Science, 2013, 48(10): 3708-3715.
[4] 徐济进, 陈立功, 倪纯珍. 机械应力消除法对焊接残余应力的影响[J]. 机械工程学报, 2009, 45(9): 291-295.
Xu Jijin, Chen Ligong, Ni Chunzhen. Effect of mechanical stress relieving method on welding residual stress[J]. Journal of Mechanical Engineering, 2009, 45(9): 291-295.
[5] 张书奎, 罗植廷. 浅析焊接残余应力及其消除方法[J]. 冶金动力, 1996, (6): 38-41.
Zhang Shukui, Luo Zhiting. Analysis of residual stress produced by welding and its elimination methods[J]. Metallurgical Power, 1996, (6): 38-41.
[6] 刘凯欣, 张晋香, 刘颖, 等. 爆炸法消除焊接接头残余应力的数值模拟[J]. 应用力学学报, 2004, 21(2): 10-15.
Liu Kaixin, Zhang Jinxiang, Liu Ying, et al. Numerical simulation on the relief of welding residual stress through an explosive treatment[J]. Chinese Journal of Applied Mechanics, 2004, 21(2): 10-15.
[7] 项建云, 葛茂忠, 张永康. AZ31B镁合金交流氩弧焊接件激光冲击强化实验[J]. 光学学报, 2013, 33(s1): s114015.
Xiang Jianyun, Ge Maozhong, Zhang Yongkang. Experiment of laser shock strengthening tungsten inert-gas welded AZ31B magnesium alloy[J]. Acta Optica Sinica, 2013, 33(s1): s114015.
[8] 殷苏民, 张超, 王匀, 等. 激光冲击对不锈钢焊接结构影响的数值分析[J]. 中国激光, 2013,40(5): 0503005.
[9] Sano Y, Obata M, Kubo T, et al. Retardation of crack initiation and growth in austenitic stainless steels by laser peening without protective coating[J]. Materials Science and Engineering A, 2006, 417(1/2): 334-340.
[10] 徐国建, 钟立明, 王虹, 等. 激光冲击强化铝合金焊接接头的性能[J]. 中国激光, 2014, 41(6): 0603007.
[11] 李伟, 李应红, 何卫锋, 等. 激光冲击强化技术的发展和应用[J]. 激光与光电子学进展, 2008, 45(12): 15-19.
[12] See D W, Dulaney J L, Clauer A H, et al. The air force manufacturing technology laser peening initiative[J]. Surface Engineering, 2002,18(1): 32-36.
[13] 苏纯, 周建忠, 黄舒, 等. 激光冲击强化对6061-T6铝合金TIG焊接接头疲劳性能的影响[J]. 激光与光电子学进展, 2015, 52(6): 061403.
[14] 鲁金忠, 张永康, 孔德军, 等. 激光冲击强化对TC4电子束焊缝机械性能的影响[J]. 江苏大学学报(自然科学版), 2006, 27(3): 207-210.
Lu Jinzhong, Zhang Yongkang, Kong Dejun, et al. Effects on mechanical properties of TC4 welding line by laser shocking processing[J]. Journal of Jiangsu University (Natural Science Edition), 2006, 27(3): 207-210.
[15] 鲁金忠, 张永康, 钱小明, 等. 激光处理对Ti6A14V焊缝表面应力状况的影响[J]. 北京航空航天大学学报, 2007, 33(7): 869-872.
Lu Jinzhong, Zhang Yongkang, Qian Xiaoming, et al. Effects on residual stresses of Ti6Al4V electron beam welding line by laser shock processing[J]. Journal of Beijing University of Aeronautics and Astronautics, 2007, 33(7): 869-872.
[16] Fabbro R, Fournier J, Ballard P, et al. Physical study of laser-produced plasma in confined geometry[J]. Journal of Applied Physics, 1990, 68(2): 775-784.
[17] 周男, 乔登江. 脉冲束辐照材料动力学[M]. 北京: 国防工业出版社, 2002.
Zhou Nan, Qiao Dengjiang. Materials dynamics under pulse beam radiation[M]. Beijing: National Defense Industry Press, 2002.
卢海飞, 鲁金忠, 张文泉, 罗开玉. 激光冲击316L不锈钢焊接件的模拟分析与试验研究[J]. 激光与光电子学进展, 2017, 54(10): 101411. Lu Haifei, Lu Jinzhong, Zhang Wenquan, Luo Kaiyu. Simulation Analysis and Experimental Study of 316L Stainless Steel Weldments Processed by Laser Shock Peening[J]. Laser & Optoelectronics Progress, 2017, 54(10): 101411.