同一燃耗区域核燃料包壳破损建模分析
[1] Leuthrot C,Brissaud A.SADDAM: An on line computer code to assess in operation defective fuel characteristics and primary circuit contamination[C]//Topical Meeting on LWR Fuel Performance. 1994.
[2] 陈彭.轻水堆核电站燃料棒破损性状分析程序的开发[D].北京: 中国原子能科学研究院,2006: 69-70. (Chen Peng.The development of fuel rod damage character analysis code for light water reactor of nuclear power plant. Beijing: China Institute of Atomic Energy,2006: 69-70)
[3] 许锐,董冰,付亚茹,等. 压水堆燃料棒裂变产物释放产生比计算方法[J]. 核技术,2015,38: 040605.(Xu Rui, Dong Bing, Fu Yaru, et al.Methods for calculating the release to birth ratio of volatile fission products. Nuclear Techniques, 2015,38: 040605)
[4] 吕炜枫,熊军,唐邵华. 破损燃料组件中裂变产物向冷却剂释放量计算[J]. 核动力工程,2013(s2): 23-26.(Lü Weifeng, Xiong Jun,Tang Shaohua.Research on release calculation of fission product from defect fuel rod to reactor coolant.Nuclear Power Engineering,2013(s2): 23-26)
[5] 周静,宫权,邱海峰. 压水堆核电厂裂变产物源项计算方法研究[J]. 核科学与工程,2014,34(4): 469-474.(Zhou Jing, Gong Quan, Qiu Haifeng.Study on the calculation method of source term from fission products.Nuclear Science and Engineering, 2014,34(4): 469-474)
[6] Kim H.Calculation of burnup for instrumented capsule using activity ratio of Cs-134/Cs-137[R].HANARO workshop.2004.
[7] Genin J B,Harrer A,Musante Y. Diademe: A computer code to assess in operation defective fuel characteristics and primary circuit contamination[R]. FR0301157, 2000.
[8] 陈彭,张应超,季松涛,等. 核电站燃料棒破损在线探测系统研制[J]. 原子能科学技术,2005,39(s1): 131-135.(Chen Peng,Zhang Yingchao,Ji Songtao,et al.Development of fuel rod failure on-line detection system for nuclear power plant.Atomic Energy Science and Technology,2005,39(s1): 131-135)
常建, 蔡杰进. 同一燃耗区域核燃料包壳破损建模分析[J]. 强激光与粒子束, 2017, 29(5): 056002. Chang Jian, Cai Jiejin. Modeling and analysis situation of fuel rod cladding crevasse in same burnup area[J]. High Power Laser and Particle Beams, 2017, 29(5): 056002.