[1] 朱国明, 康永林, 朱帅. 汽车用超高强QP钢的工艺与组织性能研究[J]. 机械工程学报, 2017, 53(12): 110-117.

    Zhu G M, Kang Y L, Zhu S. Study on process, microstructure and property of ultra-high strength QP steel for automobile[J]. Journal of Mechanical Engineering, 2017, 53(12): 110-117.

[2] 康永林, 朱国明. 中国汽车发展趋势及汽车用钢面临的机遇与挑战[J]. 钢铁, 2014, 49(12): 1-7.

    Kang Y L, Zhu G M. Development trend of China's automobile industry and the opportunities and challenges of steels for automobiles[J]. Iron & Steel, 2014, 49(12): 1-7.

[3] Speer J G, Edmonds D V, Rizzo F C, et al. Partitioning of carbon from supersaturated plates of ferrite, with application to steel processing and fundamentals of the bainite transformation[J]. Current Opinion in Solid State and Materials Science, 2004, 8(3/4): 219-237.

[4] Kim C H, Choi J K, M J. et al. A study on the CO2 laser welding characteristics of high strength steel up to 1500 MPa for automotive application[J]. Journal of Achievements in Materials & Manufacturing Engineering, 2010, 39(1): 6-11.

[5] Wang J F, Yang L J, Sun M S, et al. Effect of energy input on the microstructure and properties of butt joints in DP1000 steel laser welding[J]. Materials & Design, 2016, 90: 642-649.

[6] 王金凤, 王立君, 杨立军, 等. DP1000高强钢激光焊接接头组织性能研究[J]. 中国激光, 2014, 41(9): 0903003.

    Wang J F, Wang L J, Yang L J, et al. Research on microstructure and properties of laser welding DP1000 high-strength steel weld joints[J]. Chinese Journal of Lasers, 2014, 41(9): 0903003.

[7] Xia M, Sreenivasan N, Lawson S, et al. A comparative study of formability of diode laser welds in DP980 and HSLA steels[J]. Journal of Engineering Materials and Technology, 2007, 129(3): 446-452.

[8] Panda S K, Kuntz M L, Zhou Y. Finite element analysis of effects of soft zones on formability of laser welded advanced high strength steels[J]. Science and Technology of Welding and Joining, 2009, 14(1): 52-61.

[9] Li J, Nayak S S, Biro E, et al. Effects of weld line position and geometry on the formability of laser welded high strength low alloy and dual-phase steel blanks[J]. Materials & Design, 2013, 52(24): 757-766.

[10] Guo W, Wan Z D, Peng P, et al. Microstructure and mechanical properties of fiber laser welded QP980 steel[J]. Journal of Materials Processing Technology, 2018, 256: 229-238.

[11] Li W D, Ma L X, Peng P, et al. Microstructural evolution and deformation behavior of fiber laser welded QP980 steel joint[J]. Materials Science and Engineering A, 2018, 717: 124-133.

[12] 李敏, 张旺, 华学明, 等. 光纤激光与GMAW-P复合焊接等离子体及熔滴过渡动态特征研究[J]. 中国激光, 2017, 44(4): 0402008.

    Li M, Zhang W, Hua X M, et al. Investigation of plasma and metal transfer dynamic behavior during fiber laser GMAW-P hybrid welding[J]. Chinese Journal of Lasers, 2017, 44(4): 0402008.

[13] 史鹏飞, 黄坚, 澹台凡亮, 等. 27SiMn高强钢激光-MAG复合焊接头组织和性能[J]. 中国激光, 2017, 44(10): 1002001.

    Shi P F, Huang J, Tantai F L, et al. Microstructures and properties of 27SiMn high-strength steel joints by laser-MAG hybrid welding[J]. Chinese Journal of Lasers, 2017, 44(10): 1002001.

[14] 刘会杰. 焊接冶金与焊接性[M]. 北京: 机械工业出版社, 2007.

    LiuHuijie. Welding metallurgy and weldability[M]. Beijing: China Machine Press, 2007.

[15] Guo W, Li L, Dong S Y, et al. Comparison of microstructure and mechanical properties of ultra-narrow gap laser and gas-metal-arc welded S960 high strength steel[J]. Optics and Lasers in Engineering, 2017, 91: 1-15.