[1] Kumar S, Murthy Reddy K V V S, Kumar A, et al. Development and characterization of polymer-ceramic continuous fiber reinforced functionally graded composites for aerospace application［J］. Aerospace Science and Technology, 2013, 26(1): 185-191.

[2] 刘业楠, 赵华, 易忠, 等. 空间站带电效应分析及对策［J］. 载人航天, 2013, 19(5): 6-12. (Liu Yenan, Zhao Hua, Yi Zhong, et al. Analysis and countermeasures of charging effects in space station. Journal of Aerospace, 2013, 19(5): 6-12)

[3] Ferguson D C. New frontiers in spacecraft charging［J］. IEEE Trans Plasma Science, 2012, 40(2): 139.

[4] Lu H, Schaff W J, Eastman L F, et al. Surface charge accumulation of InN films grown by molecular-beam epitaxy［J］. Applied Physics Letters, 2003, 82(11): 1736-1738.

[5] Yamamoto O, Hamada S, Fukuda T, et al. Charging characteristics of a solid insulator in vacuum under AC voltage excitation［J］. IEEE Trans Dielectrics and Electrical Insulation, 2006, 13(1): 2-9.

[6] Wild R, Benduhn J, Stollenwerk L. Surface charge transport and decay in dielectric barrier discharges［J］. Journal of Physics D-Applied Physics, 2014, 47(43): 435.

[7] 王立, 秦晓刚. 空间材料表面充放电性能试验评估方法研究［J］. 真空与低温, 2002, 8(2): 85-86. ( Wang Li, Qin Xiaogang. Study on evaluation method of charge and discharge performance on space material. Vacuum and Low Temperature, 2002, 8(2): 85-86)

[8] 庞永江, 徐跃民. 地面实验室模拟空间等离子体环境的初步测试［J］. 空间科学学报, 2001, 21(3): 259-265. (Pang Yongjiang, Xu Yuemin. Preliminary test of simulated spatial plasma environment in ground laboratory. Acta Scientiae Sinica, 2001, 21 (3): 259-265)

[9] 刘海波, 李得天, 杨生胜, 等. 不同面积Kapton材料的放电特性实验研究［J］. 真空与低温, 2014, 20(3): 140-144. (Liu Haibo, Li Derian, Yang Shengsheng, et al. Experimental study on discharge characteristics of different areas of Kapton materials. Vacuum and Low Temperature, 2014, 20(3): 140-144)

[10] Sudarshan T, Dougal R A. Mechanisms of surface flashover along solid dielectrics in compressed gases-A review［J］. IEEE Trans Electrical Insulation , 1986, 21(5): 727-746.

[11] Kumara S, Ma Bin, Serdyuk Y V, et al . Surface charge decay on HTV silicone rubber: Effect of material treatment by corona discharges［J］. IEEE Trans Dielectrics and Electrical Insulation, 2012, 19(6): 2189-2195.

[12] Molinie P. A review of mechanisms and models accounting for surface potential decay［J］. IEEE Trans Plasma Science, 2012, 40(2): 167-176.

[13] Du B X, Xiao M. Influence of surface charge on DC flashover characteristics of epoxy/BN nanocomposites［J］. IEEE Trans actions on Dielectrics and Electrical Insulation, 2014, 21(2): 529-536.

[14] Tao S, Wenjin Y, Cheng Z, et al. Enhanced surface flashover strength in vacuum of polymethyl-methacrylate by surface modification using atmospheric-pressure dielectric barrier discharge［J］. Applied Physics Letters, 2014, 105: 071607.

[15] Rychkov D, Kuznetsov A, Rychkov A. Electret properties of polyethylene and polytetrafluoroethylene films with chemically modified surface［J］. IEEE Trans Dielectrics and Electrical Insulation, 2011, 18(1): 8-14.

[16] 左应红, 王建国, 罗旭东, 等. 双麦克斯韦分布等离子体对航天器表面的充电效应［J］. 强激光与粒子束, 2015, 27: 114003. (Zuo Yinghong, Wang Jianguo, Luo Xudong, et al. Charging effect of two-Maxwell-distributed plasma on the surface of spacecraft. High Power Laser and Particle Beams, 2015, 27: 114003)

[17] 曹鹤飞, 孙永卫, 原青云, 等. 航天器背面接地介质材料等离子体充电研究［J］. 强激光与粒子束, 2015, 27: 103204. (Cao Hefei, Sun Yongwei, Yuan Qingyun, et al. Study on plasma charging of ground dielectric material on the back of spacecraft. High Power Laser and Particle Beams, 2015, 27: 103204)