[1] Simon Bickerton, Hubert C Stadtfeld, Karl V Steiner, et al. Design and application of actively controlled injection schemes for resin-transfer molding [J]. Composites Science and Technology(S0266-3538), 2001, 61(11): 1625–1637.

[2] Omar Restrepo, Kuang-Ting Hsiao, Alejandro Rodriguez b, et al. Development of adaptive injection flow rate and pressure control algorithms for resin transfer molding [J]. Composites: Part A(S1359-835X), 2007, 38A(6): 1547–1568.

[3] Dhiren Modi, Nuno Correia, Michael Johnson, et al. Active control of the vacuum infusion process [J]. Composites: Part A(S1359-835X), 2007, 38(5): 1271–1287.

[4] Amico S, Lekakou C. An experimental study of the permeability and capillary pressurein resin-transfer molding[J]. Composite Science and Technology(S0266-3538), 2001, 61(13): 1945–1959.

[5] Sozer E M, Tuncol G, Danisman M, et al. Constraints on monitoring resin flow in the resin transfer molding (RTM) process by using thermocouple sensors [J]. Composites Part A(S1359-835X), 2007, 38(5): 1363–1386.

[6] Skordos A A, Karkanas P I, Partridge I K. A dielectric sensor for measuring flow in resin transfer moulding [J]. Measurement Science and Technology(S1361-6501), 2000, 11(1): 25–31.

[7] Murat Danisman, Goker Tuncol, Alper Kaynar, et al. Monitoring of resin flow in the resin transfer molding (RTM) process using point-voltage sensors [J]. Composites Science and Technology(S0266-3538), 2007, 67(3/4): 367–379.

[8] Nedanov P, Advani S. A method to determine 3-D permeability of fibrous performs [J]. Journal of Composite Materials (S1530-793X), 2002, 36(2): 241–254.

[9] 张燕君, 娄俊波, 康瑞雪, 等. 新型分布式布喇格光纤光栅传感系统的研究 [J].光电工程, 2010, 37(1): 88–94. ZHANG Yan-jun, LOU Jun-bo, KANG Rui-xue, et al. Novel Distributed Sensor System V Based on Fiber Bragg Grating Sensing Technology [J]. Opto-Electronic Engineering, 2010, 37(1): 88–94.

[10] 冯艳, 李玉龙, 张华, 等. 埋入式光纤 Bragg光栅径向应力传感性能参数分析 [J].光电工程, 2011, 38(12): 104–109. FENG Yan, LI Yu-long, ZHANG Hua, et al. Parameter Analysis on the Radial Stress Transfer of Fiber Bragg Grating Embedded into Metal Beam [J]. Opto-Electronic Engineering, 2011, 38(12): 104–109.

[11] Lekakou S Cook, Deng Y, Ang T W, et al. Optical fibre sensor for monitoring flow and resin curing in composites manufacturing [J]. Composites: Part A(S1359-835X), 2006, 37(6): 934–938.

[12] Yingdan Zhu, Chang Wang, Jihui Wang. Long-period gratings in-situ Sensing for Flow Monitoring in Liquid Composite Molding [J]. Journal of Science and Technology(S1530-793X), 2005, 21(2): 234–238.

[13] Patricia P, Parlevliet, Harald E N. Measurement of (post-) curing strain development with fibre Bragg gratings [J]. Polymer Testing(S0142-9418), 2010, 29(3): 291–301.