[1] Sanderson T, Ume C, Jarzynski J. Longitudinal wave generation in laser ultrasonics[J]. Ultrasonics, 1998, 35(8): 553-561.

[2] Hess P, Lomonosov A M, Mayer A P. Laser-based linear and nonlinear guided elastic waves at surfaces (2D) and wedges (1D)[J]. Ultrasonics, 2014, 54(1): 39-55.

[3] Wang J J, Shi Y F, Lu L Z. Analysis of laser-generated ultrasonic force source at specimen surface and display of bulk wave in transversely isotropic plate by numerical method[J]. Appl Surf Sci, 2012, 258(6): 1919-1923.

[4] Lowe M J S, Alleyne D N, Cawley P. Defect detection in pipes using guided waves[J]. Ultrasonics, 1998, 36(1): 147-154.

[5] Duquennoy M, Ouaftouh M. Ultrasonic characterization of residual stresses in steel rods using a laser line source and piezoelectric transducers[J]. NDT & E Int, 2001, 34(5): 355-362.

[6] Sanderson R M, Shen Y C. Measurement of residual stress using laser-generated ultrasound[J]. Pres Ves Pip, 2010, 87(12): 762-765.

[7] Mounier D, Poilane C, Khelfa H. Sub-gigahertz laser resonant ultrasound spectroscopy for the evaluation of elastic properties of micrometric fibers[J]. Ultrasonics, 2014, 44(1): 1223-1227.

[8] Q J Huang, Y Cheng, X J Liu. Study of the elastic constants in a La0.6Sr0.4MnO3 film by means of laser-generated ultrasonic wave method[J]. Ultrasonics, 2006, 54(1): 259-267.

[9] P Pietroni, N Paone, M Lebeau. Development of non-destructive Young′s modulus measurement techniques in non-oriented CeF3 crystals[J]. Nucl Instrum Meth Phys, 2005, 537(2): 203-206.

[10] Nguyen, T L. Development of an Ultrasonic Technique for the Measurement of Machining Induced Surface Residual Stresses[D]. West Lafayette: Purdue University, 2000.

[11] 罗开玉, 陈起, 吕刺, 等. 双面激光同时冲击AM50镁合金板料的厚度分析[J]. 中国激光, 2014, 41(1): 0103003.

    Luo Kaiyu, Chen Qi, Lü Ci, et al.. Thichness analysis of two- sided simultaneous laser shock processing on AM50 Mg alloy[J]. Chinese J Lasers, 2014, 41(1): 0103003.

[12] 董利明, 倪辰荫, 沈中华, 等. 基于激光激发多模态超声波速测量的材料弹性常数测定[J]. 中国激光, 2011, 38(4): 0408004.

    Dong Liming, Ni Chenyin, Shen Zhonghua, et al.. Determination of elastic constants of materials based on the velocity measurement of laser-generated multi-mode ultrasound[J]. Chinese J Lasers, 2014, 38(4): 0408004.

[13] 李加, 倪辰荫, 张宏超, 等. 基于激光辅助加热的激光超声投捕法识别微裂纹[J]. 中国激光, 2013, 40(4): 0408008.

    Li Jia, Ni Chenyin, Zhang Hongchao, et al.. Detection of micro-crack by ultrasonic approach of one-sided pitch-catch method based on laser assisted heating[J]. Chinese J Lasers, 2013, 40(4): 0408008.

[14] 钦兰云, 王维, 杨光. 超声辅助钛合金激光沉积成形试验研究[J]. 中国激光, 2013, 40(1): 0103001.

    Qin Lanyun, Wang Wei, Yang Guang. Experimental study on ultrasonic-assisted laser metal deposition of titanium alloy[J]. Chinese J Lasers,2013,40(1): 0103001.