Mitigation of beam sampling grating damage induced by upstream flaws in the final optics assembly
[1] J. Lindl, “Development of the indirect‐drive approach to inertial confinement fusion and the target physics basis for ignition and gain,” Phys. Plasmas 2(11), 3933–4024 (1995).
[2] K. Manes et al., “Damage mechanisms avoided or managed for NIF large optics,” Fusion Sci. Technol. 69(1), 146–249 (2016).
[3] A. A. Manenkov, “Fundamental mechanisms of laser-induced damage in optical materials: today’s state of understanding and problems,” Opt. Eng. 53(1), 010901 (2014).
[4] P. J. Wegner et al., “NIF final optics system: frequency conversion and beam conditioning,” Proc. SPIE 5341, 180–189 (2004).
[5] D. Zhao et al., “Laser-induced damage of fused silica on high-power laser: beam intensity modulation, optics defect, contamination,” Proc. SPIE 9632, 96320G (2015).
[6] D. Zhao et al., “Research on laser damage of final optics assembly on high-power laser facility,” Proc. SPIE 9237, 92371V (2014).
[7] A. K. Burnham et al., “Improving 351-nm damage performance of large-aperture fused silica and DKDP optics,” Proc. SPIE 4679, 173–185 (2002).
[8] I. L. Bass et al., “Mitigation of laser damage growth in fused silica NIF optics with a galvanometer scanned CO2 laser,” Proc. SPIE 6261, 62612A (2006).
[9] J. Neauport et al., “Concerning the impact of polishing induced contamination of fused silica optics on the laser-induced damage density at 351 nm,” Opt. Commun. 281(14), 3802–3805 (2008).
[10] T. I. Suratwala et al., “HF‐based etching processes for improving laser damage resistance of fused silica optical surfaces,” J. Am. Ceram. Soc. 94(2), 416–428 (2011).
[11] J. L. Hendrix et al., “Ghost analysis visualization techniques for complex systems: examples from the NIF final optics assembly,” in Third Int. Conf. on Solid State Lasers for Application to Inertial Confinement Fusion, pp. 306–320 (1999).
[12] S. Mainguy, B. Le Garrec, and M. Josse, “Downstream impact of flaws on the LIL/LMJ laser lines,” Proc. SPIE 5991, 599105 (2005).
[13] Q. Liu, J. Wu, and C. Li, “Design of beam sampling grating and study on its diffraction action,” Proc. SPIE 6027, 60273C (2005).
[14] M. Bray and G. Chabassier, “Localized wavefront deformations—propagation in nonlinear media: II. A simple but accurate computational method,” in Third Int. Conf. on Solid State Lasers for Application to Inertial Confinement Fusion, pp. 480–494 (1999).
[15] J. T. Hunt, K. R. Manes, and P. A. Renard, “Hot images from obscurations,” Appl. Opt. 32(30), 5973–5982 (1993).
[16] C. C. Widmayer, M. R. Nickels, and D. Milam, “Nonlinear holographic imaging of phase errors,” Appl. Opt. 37(21), 4801–4805 (1998).
[17] G. M. Muslu and H. A. Erbay, “Higher-order split-step Fourier schemes for the generalized nonlinear Schrodinger equation,” Math. Comput. Simul. 67(6), 581–595 (2005).
[18] V. I. Bespalov and V. I. Talanov, “Filamentary structure of light beams in nonlinear liquids,” JETP Lett. 3, 307 (1966).
Zhaoyang Jiao, Mingying Sun, Dongfeng Zhao, Jianqiang Zhu. Mitigation of beam sampling grating damage induced by upstream flaws in the final optics assembly[J]. Collection Of theses on high power laser and plasma physics, 2016, 14(1): 011021.
PDF全文
