[1] FRAZIER W E.Metal additive manufacturing: a review[J].Journal of Materials Engineering and Performance, 2014, 23(6): 1917-1928.

[2] KAMATH C, El-DASHER B, GALLEGOS G F, et al.Density of additively-manufactured, 316L SS parts using laser powder-bed fusion at powers up to 400 W[J].The International Journal of Advanced Manufacturing Technology, 2014, 74(1-4): 65-78.

[3] CHERRY J A, DAVIES H M, MEHMOOD S, et al.Investigation into the effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser melting[J].The International Journal of Advanced Manufacturing Technology, 2015, 76(5-8): 869-879.

[4] SUN Z, TAN X, SHU B T, et al. Selective laser melting of stainless steel 316L with low porosity and high build rates[J].Materials and Design, 2016, 104: 197-204.

[5] MA M, WANG Z, GAO M, et al.Layer thickness dependence of performance in high-power selective laser melting of 1Cr18Ni9Ti stainless steel[J].Journal of Materials Processing Technology, 2015, 215(1): 142-150.

[6] SHI X, MA S, LIU C, et al.Performance of high layer thickness in selective laser melting of Ti6Al4V[J].Materials, 2016, 9(12): 975.

[7] ZIETALA M, DUREJKO T, POLANSKI M, et al.The microstructure, mechanical properties and corrosion resistance of 316L stainless steel fabricated using laser engineered net shaping[J].Materials Science and Engineering: A, 2016, 677: 1-10.

[8] CASATI R, LEMKE J, VEDANI M.Microstructure and fracture behavior of 316L austenitic stainless steel produced by selective laser melting[J].Journal of Materials Science and Technology, 2016, 32(8): 738-744.

[9] GUO P, ZOU B, HUANG C, et al.Study on microstructure, mechanical properties and machinability of efficiently additive manufactured AISI 316L[J].Journal of Materials Processing Technology, 2017, 240: 12-22.

[10] 陈洪宇, 顾冬冬, 顾荣海, 等.5CrNi4Mo模具钢选区激光熔化增材制造组织演变及力学性能研究[J].中国激光, 2016(2): 60-67.

[11] 宋长辉, 杨永强, 王赟达, 等.CoCrMo合金激光选区熔化成型工艺及其性能研究[J].中国激光, 2014(6): 52-59.

[12] ZHANG B, DEMBINSKI L, CODDET C.The study of the laser parameters and environment variables effect on mechanical properties of high compact parts elaborated by selective laser melting 316L powder[J].Materials Science and Engineering: A, 2013, 584(6): 21-31.

[13] MERTENS A, REGINSTER S, CONTREPOIS Q, et al.Microstructures and mechanical properties of stainless steel AISI 316L processed by selective laser melting[J].Materials Science Forum, 2014, 783-786: 898-903.

[14] SURYAWANSHI J, PRASHANTH K G, RAMAMURTY U.Mechanical behavior of selective laser melted 316L stainless steel[J].Materials Science and Engineering: A, 2017, 696: 113-121.