[1] 马官兵, 张俊, 李明, 等. 无损检测可靠性的研究进展[J]. 中国电力, 2012, 45(6): 64-69.

    Ma Guanbing, Zhang Jun, Li Ming, et al. Review on the reliability of non-destructive testing technology[J]. Electric Power, 2012, 45(6): 64-69. (in Chinese)

[2] George A G. Probability of detection POD curves derivation, application and limitations[R]. London: Health and Safety Executive, 2006.

[3] Burch S F. Computer modeling for the predication of the probability of detection of ultrasonic corrosion mapping[J]. Insight, 2005, 47(12): 761-764.

[4] Dag H. Reliability gains from combing eddy current and ultrasonic testing[J]. NDT & E International, 2000, 33(6): 351-362.

[5] 程志虎, 王怡之, 陈柏真. 常规无损检测可靠性概念的分析与修正[J]. 无损检测, 1999, 21(1): 2-13.

    Cheng Zhihu, Wang Yizhi, Chen Baizhen. Analysis and correction of conventional NDT reliability conception[J]. NDT, 1999, 21(1): 2-13. (in Chinese)

[6] 冯辅周, 张超省, 宋爱斌, 等, 超生红外热像检测中疲劳裂纹的检出概率模型研究[J]. 红外与激光工程, 2016, 45(3): 0304005.

    Feng Fuzhou, Zhang Chaosheng, Song Aibin, et al. Probability of detection model for fatigue crack in ultrasonic infrared imaging[J]. Infrared and Laser Engineering, 2016, 45(3): 0304005. (in Chinese)

[7] 张超省, 宋爱斌, 冯辅周, 等. 超声红外热像检测条件的优化方法研究[J]. 红外与激光工程, 2016, 45(2): 0204005.

    Zhang Chaosheng, Song Aibin, Feng Fuzhou, et al. Research on optimization method of test conditions in sonic infrared imaging[J]. Infrared and Laser Engineering, 2016, 45(2): 0204005. (in Chinese)

[8] 刘俊岩, 刘勋, 王扬. 线性调频激励的红外热波成像检测技术[J]. 红外与激光工程, 2012, 41(6): 1416-1422.

    Liu Junyan, Liu Xun, Wang Yang. Technology of linear frequency modulation infrared thermal-wave imaging for nondestructive testing[J]. Infrared and Laser Engineering, 2012, 41(6): 1416-1422. (in Chinese)

[9] Gong Jinlong, Liu Junyan, Qin Lei, et al. Investigation of carbon fiber reinforced polymer (CFRP) sheet with subsurface defects inspection using thermal-wave radar imaging (TWRI) based on the multi-transform technique[J]. NDT & E International, 2014, 62(2): 130-136.

[10] Liu Junyan, Liu Yang, Wang Fei, et al. Study on probability of detection (POD) determination using lock-in thermography for nondestructive inspection (NDI) of CFRP composite materials[J]. Infrared Physics & Technology, 2015, 71(2): 448-456.