CFRP层板缺陷红外热波雷达成像检测概率研究

建立了Chirp调制激光激励的红外热波雷达成像检测系统, 提出了基于分数阶傅里叶变换的Chirp锁相算法和基于希尔伯特变换时域积分的HT算法, 实现了对CFRP层板缺陷的检测; 合理设计了模拟缺陷的尺寸分布范围与缺陷判定准则, 采用Hit/miss法分析了信号提取算法对检测概率的影响; 给出了不同检测参数与判定阈值情况下, 相关算法、Chirp锁相算法和HT算法提取结果的检测概率数据, 确定了红外热波雷达成像系统对CFRP层板缺陷的检测概率水平。

Abstract

An infrared thermal wave radar imaging system was set up to detect the internal CFRP laminate defects. Two novel kinds of signal extraction algorithms named Chirp lock-in algorithm and HT algorithm based on Hilbert transform and Fractional Fourier transform were developed in order to obtain the characteristic information of thermal wave radar signal. The defect size distribution range and criteria of defect judgment were designed reasonably. The influence of signal extraction algorithms on the probability of detection was studied by means of Hit/miss analysis methodology. The POD curves obtained by the proposed algorithms at the designed testing parameters and thresholds were given. According to the probability analysis of detection, the probability level of CFRP laminate defects detection using infrared thermal wave radar imaging system were identified.

参考文献

[1] 马官兵, 张俊, 李明, 等. 无损检测可靠性的研究进展[J]. 中国电力, 2012, 45(6): 64-69.

Ma Guanbing, Zhang Jun, Li Ming, et al. Review on the reliability of non-destructive testing technology[J]. Electric Power, 2012, 45(6): 64-69. (in Chinese)

[2] George A G. Probability of detection POD curves derivation, application and limitations[R]. London: Health and Safety Executive, 2006.

[3] Burch S F. Computer modeling for the predication of the probability of detection of ultrasonic corrosion mapping[J]. Insight, 2005, 47(12): 761-764.

[4] Dag H. Reliability gains from combing eddy current and ultrasonic testing[J]. NDT & E International, 2000, 33(6): 351-362.

[5] 程志虎, 王怡之, 陈柏真. 常规无损检测可靠性概念的分析与修正[J]. 无损检测, 1999, 21(1): 2-13.

Cheng Zhihu, Wang Yizhi, Chen Baizhen. Analysis and correction of conventional NDT reliability conception[J]. NDT, 1999, 21(1): 2-13. (in Chinese)

[6] 冯辅周, 张超省, 宋爱斌, 等, 超生红外热像检测中疲劳裂纹的检出概率模型研究[J]. 红外与激光工程, 2016, 45(3): 0304005.

Feng Fuzhou, Zhang Chaosheng, Song Aibin, et al. Probability of detection model for fatigue crack in ultrasonic infrared imaging[J]. Infrared and Laser Engineering, 2016, 45(3): 0304005. (in Chinese)

[7] 张超省, 宋爱斌, 冯辅周, 等. 超声红外热像检测条件的优化方法研究[J]. 红外与激光工程, 2016, 45(2): 0204005.

Zhang Chaosheng, Song Aibin, Feng Fuzhou, et al. Research on optimization method of test conditions in sonic infrared imaging[J]. Infrared and Laser Engineering, 2016, 45(2): 0204005. (in Chinese)

[8] 刘俊岩, 刘勋, 王扬. 线性调频激励的红外热波成像检测技术[J]. 红外与激光工程, 2012, 41(6): 1416-1422.

Liu Junyan, Liu Xun, Wang Yang. Technology of linear frequency modulation infrared thermal-wave imaging for nondestructive testing[J]. Infrared and Laser Engineering, 2012, 41(6): 1416-1422. (in Chinese)

[9] Gong Jinlong, Liu Junyan, Qin Lei, et al. Investigation of carbon fiber reinforced polymer (CFRP) sheet with subsurface defects inspection using thermal-wave radar imaging (TWRI) based on the multi-transform technique[J]. NDT & E International, 2014, 62(2): 130-136.

[10] Liu Junyan, Liu Yang, Wang Fei, et al. Study on probability of detection (POD) determination using lock-in thermography for nondestructive inspection (NDI) of CFRP composite materials[J]. Infrared Physics & Technology, 2015, 71(2): 448-456.

龚金龙, 盖志刚, 解维浩, 刘恩晓, 禹定峰, 刘俊岩, 王扬. CFRP层板缺陷红外热波雷达成像检测概率研究[J]. 红外与激光工程, 2017, 46(10): 1004005. Gong Jinlong, Gai Zhigang, Xie Weihao, Liu Enxiao, Yu Dingfeng, Liu Junyan, Wang Yang. Study on probability of detection for CFRP laminate defect using infrared thermal wave radar imaging[J]. Infrared and Laser Engineering, 2017, 46(10): 1004005.

CFRP层板缺陷红外热波雷达成像检测概率研究

关于本站 Cookie 的使用提示

全站搜索

CFRP层板缺陷红外热波雷达成像检测概率研究

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索