[1] 杨华军,胡渝,谢康. 大功率导体激光束非球面准直系统的优化设计[J]. 中国激光,2007,34(12)：1607～1612

    Yang Huajun,Hu Yu,Xie Kang. Optimization design for asphetic collimation system of high-power semiconductor laser beam[J]. Chinese. J. Lasers, 2007,34(12)：1607～1612

[2] 张凤生. 非球面系统中高斯光束传输的数值模拟[J]. 光学学报,2008,28(1)：179～184

    Zhang Fengsheng. Numerical computation for propagation of Gaussian beam through aspheric sysrem [J]. Acta Optica Sinica, 2008,28(1)：179～184

[3] 戴一帆,周林,谢旭辉 等. 应用离子束进行光学镜面确定性修形的实现[J]. 光学学报,2008,28(6)：1132～1137

    Dai Yifan,Zhou Lin,Xie Xuhui et al..Deterministic figuring in optical machining by ion beam [J]. Acta Optica Sinica, 2008,28(6)：1132～1137

[4] Xiaokun Wang,Lihui Wang,Longhai Yin et al.. Measurement of large aspheric surfaces by annular subaperture stitching interferometry [J]. Chin. Opt. Lett., 2007,5(11): 645～648

[5] 陈建平,沈林成. 大口径非球面加工建模与控制技术[J]. 中国激光,2007,34(12)：1705～1710

    Chen Jianping,Shen Lincheng. Model and control technology for machining largeK-Kdiameter optical aspheric mirror[J]. Chin. J. Lasers, 2007,34(12)：1705～1710

[6] R. G. Bingham, D. D. Walker et al.. A novel automated process for aspheric surfaces[C]. SPIE, 2000, 4093: 445～450

[7] D. D. Walker, A. Beaucamp, D. Brooks et al... Novel CNC polishing process for pontrol of form and texture on aspheric surfaces[C]. SPIE, 2002, 4767: 99～106

[8] D. D. Walker, A. Beaucamp, D. Brooks et al.. New results from the precessions polishing process scaled to larger sizes[C]. SPIE, 2004, 5494: 71～81

[9] D. D. Walker, A. Beaucamp, V. Doubrovski et al.. Automated optical fabrication-first results from the new “Precessions” 1.2 m CNC polishing machine[C]. SPIE, 2006, 6273: 91～98

[10] D. D. Walker, A. Baldwin, R. Evans et al.. A quantitative comparison of three grolishing techniques for the precessions TM process[C]. SPIE, 2007, 6671: H1～H9

[11] Quantang Fan,Jiangqiang Zhu,Bao’an Zhang. Effect of the geometry of workpiece on polishing velocity in free annular polishing [J]. Chin. Opt. Lett., 2007,5(5): 298～300

[12] 王贵林. 光学材料超精密研抛关键技术研究[D]. 长沙: 国防科学技术大学, 2002.55～56

    Wang Guilin. A Study on Key Techniques in Ultra-Precision Lapping and Polishing for Optical sic Materials[D]. Changsha: University of defense technology, 2002.55～56

[13] 高波. 气囊抛光实验样机研制及其关键技术研究[D]. 哈尔滨：哈尔滨工业大学,2005.55～57

    Gao Bo. Development of Bonnet Tool Polishing Apparatus and Research[D]. Harbin: Harbin institute of technology, 2005.55～57

[14] K. L. Johnson. Contact mechanics[M]. Beijing: Higher Education Pres, 1992. 72～77

[15] 陈华,李陶深,赵进创. 基于高斯函数假设的图像频谱恢复特性分析方法[J]. 光学学报,2007,27(3)：424～430

    Chen hua,Li Taoshen,Jinchuang. A Method for image spectrum restoration property analysis based on Gaussian function [J]. Acta Optica Sinica, 2007,27(3)：424～430