[1] 舒尔茨, 阿贝尔, 何宁. 高速加工理论与应用[M]. 北京: 科学出版社, 2010.

    Herbert Schulz, Eberhard Abele, He Ning. The High Speed Machining—Fundamentals and Applications[M]. Beijing: Sciences Press, 2010.

[2] 何宁. 高速切削技术[M]. 上海: 上海科学技术出版社, 2012.

    He Ning. High Speed Cutting Technology[M]. Shanghai: Shanghai scientific and Technical Publishers, 2012.

[3] 韩志武, 任露泉, 刘祖斌. 激光织构仿生非光滑表面抗磨性能研究[J]. 摩擦学学报, 2004, 24 (4): 289-293.

    Han Zhiwu, Ren Luquan, Liu Zubin. Investigation on anti-wear ability of bionic nonsmooth[J]. Tribology, 2004, 24(4): 289-293.

[4] 任露泉, 杨卓娟, 韩志武. 生物非光滑耐磨表面仿生应用研究展望[J]. 农业机械学报, 2005, 36(7): 144-147.

    Ren Luquan, Yang Zhuojuan, Han Zhiwu. Non-smooth wearable surfaces of living creatures and their bionic application[J]. Transactions of The Chinese Society of Agricultural Machinery, 2005, 36(7): 144-147.

[5] 丛茜, 任露泉, 吴连奎. 几何非光滑生物体表形态的分类学研究[J]. 农业工程学报, 1992, 8(2): 7-12.

    Cong Qian, Ren Luquan, Wu Liankui. Taxonomic research on geometric nonsmooth animal surface shapes[J]. Transactions of The Chinese Society of Agricultural Machinery, 1992, 8(2): 7-12.

[6] Z Burton, B Bhushan. Surface characterization and adhesion and friction properties of hydrophobic leaf surfaces[J]. Ultramicroscopy, 2006, 106(8): 709-719.

[7] Z Burton, B Bhushan. Hydrophobicity, adhesion, and friction properties of nanopatterned polymers and scale dependence for micro-and nanoelectromechanical systems[J]. Nano Letters, 2005, 5(8): 1607-1613.

[8] 汪家道, 陈大融, 孔宪梅. 规则凹坑表面形貌润滑研究[J]. 摩擦学学报, 2003, 23(1): 52-55.

    Wang Jiadao, Chen Darong, Kong Xianmei. Study on lubrication of regular concave surface[J]. Tribology, 2003, 23(1): 52-55.

[9] A Ronen, I Etsion, Y Kligerman. Friction-reducing surface-texturing in reciprocating automotive component［J］. Trib Trans, 2001, 44(3): 359-366.

[10] U Pettersson, S Jacobson. Influence of surface texture on boundary lubricated sliding contacts［J］. Tribology International, 2003, 36(11): 857-864.

[11] 韩中领, 汪家道, 陈大融. 凹坑表面形貌在面接触润滑状态下的减阻研究［J］. 摩擦学学报, 2009, 29(1): 10-16.

    Han Zhong ling, Wang Jiadao, Chen Darong. Drag reduction by dimples on surfaces in plane-plane contact lubrication[J]. Tribology, 2009, 29(1): 10-16.

[12] A Stournaras, P Stavropoulos, K Salonitis, et al.. An investigation of quality in CO2 laser cutting of aluminum[J]. CIRP Journal of Manufacturing Science and Technology, 2009, 2(1): 61-69.

[13] C Vincent, G Monteil, T Barrièr e, et al.. Laser machining in lamellar cast iron[J]. Int J Mater Form, 2008, 1(1): 575-578.

[14] 杨继宏. 激光打微孔作用机理及工艺研究[D]. 天津: 天津大学, 2008.

    Yang Jihong. Action Mechanism and Technics Study of Using Laser Drilling Microhole[D]. Tianjing: Tianjin University, 2008.

[15] 辛凤兰. 高质量激光打孔技术的研究[D]. 北京: 北京工业大学, 2006.

    Xin Fenglan. Research on the Laser Drilling of High Quality[D]. Beijing: Beijing University of Technology, 2006.

[16] 姜梦华, 李强, 雷訇, 等. 高峰值功率自准直脉冲NdYAG激光加工无锥度直孔研究[J]. 中国激光, 2011, 38(10): 1003004.

    Jiang Menghua, Li Qiang, Lei Hong, et al.. Study on producing non-tapered holes with adaptively collimating high peak power pulsed NdYAG laser[J]. Chinese J Lasers, 2011, 38(10): 1003004.

[17] 袁根福, 曾晓雁. 大理石的激光铣削加工试验研究[J]. 中国激光, 2003, 30(3): 275-278.

    Yuan Genfu, Zeng Yaoyan. Experimental study of laser milling on marble[J]. Chinese J Lasers, 2003, 30(3): 275-278.

[18] Deng Jianxin, Wu Ze, Lian Yunsong, et al.. Performance of carbide tools with textured rake-face filled with solid lubricants in dry cutting processes[J]. Int Journal of Refractory Metals and Hard Materials, 2012, 30(1): 164-172.

[19] Wu Ze, Deng Jianxin, Chen Yang, et a.. Performance of the self-lubricating textured tools in dry cutting of Ti-6Al-4V[J]. Int J Adv Manuf Technol, 2012, 62(9-12): 943-951.

[20] 戚宝运, 李亮, 何宁, 等. 微织构刀具正交切削Ti6Al4V的试验研究[J]. 摩擦学学报, 2011, 31(4): 346-351.

    Qi Baoyun, Li Liang, He Ning, et al.. Experimental study on orthogonal cutting of Ti6Al4V with micro-textured tool[J]. Tribology, 2011, 31(4): 346-351.

[21] Toshiyuki Enomoto, Tatsuya Sugihara, Satoshi Yukinaga, et al.. Highly wear-resistant cutting tools with textured surfaces in steel cutting[J]. CIRP Annals-Manufacturing Technology, 2012, 61(1): 571-574.

[22] Tatsuya Sugihara, Toshiyuki Enomoto. Improving anti-adhesion in aluminum alloy cutting by micro stripe texture[J]. Precision Engineering, 2012, 36(2): 229-237.

[23] Noritaka Kawasegia, Hiroshi Sugimori, Hideki Morimoto, et al.. Development of cutting tools with microscale and nanoscale textures to improve frictional behavior[J]. Precision Engineering, 2009, 33(3): 248-254.

[24] Shuting Lei, Sasikumar Devarajan, Zenghu Changc. A study of micropool lubricated cutting tool in machining of mild steel[J]. Journal of Materials Processing Technology, 2009, 209(3): 1612-1620.

[25] 袁根福, 姚燕生, 陈雪辉, 等. 激光和化学复合刻蚀加工表面质量的实验研究[J]. 中国激光, 2010, 37(1): 281-283.

    Yuan Genfu, Yao Yansheng, Chen Xuehui, et al.. Experimental study on the quality of material surface applied laser-chemical combined etching[J]. Chinese J Lasers, 2010, 37(1): 281-283.

[26] 李祥友, 曾晓雁. 激光精密切割不锈钢模板割缝质量控制[J]. 中国激光, 2002, 29(2): 176-180.

    Li Xiangyou, Zen Xiaoyan. Kerf roughness and quality control of laser precision cutting[J]. Chinese J Lasers, 2002, 29(2): 176-180.

[27] 周炳琨. 激光原理[M]. 北京: 北京国防工业出版社, 1980.

    Zhou Bingkun. Laser Principle[M]. Beijing: National Defence Industry Press, 1980.

[28] 关振中. 激光加工工艺手册[M]. 北京: 中国计量出版社, 2007. 129-130.

    Guan Zhenzhong. Process Manual of Laser Machining[M]. Beijing: China Measuring Publishing House, 2007. 129-130.