中国光学, 2012, 5 (5): 520, 网络出版: 2012-10-12   

组合式发光二极管路灯反射器的设计

Design of combined reflectors used in LED street lamps
作者单位
浙江师范大学 信息光学研究所,浙江 金华 321004
摘要
设计了一组合式路灯反射器,以使发光二极管(LED)路灯在道路照明时产生矩形光斑和均匀照度。在非成像光学基础上,利用复合抛物面的高性能集光作用和机械设计软件的强大作图功能,设计了一款分段组合复合抛物面反射器(CPC)。基于“边缘光线原理”和”裁剪法”,此款反射器能将朗伯型发光的LED光束整形为近似矩形分布,出光效率达96%以上。理论模拟证明:在高度为10 m,范围为10 m×30 m内利用此反射器进行二次配光的LED路灯的照度均匀度达05以上。该反射式LED路灯光束整形器结构简单,光学效率高、成本低廉,模拟结果完全达到了目前我国国家道路照明规范要求。
Abstract
A combined reflector for Light Emitting Diode(LED) street lamps is designed to produce a rectangular light spot and uniform lighting in the road, as well as having a simple structure and high light efficiency. Based on the principles of non-imaging optics and mechanical design software, a segmented compound parabolic reflector was designed. The reflecting beams of light from the reflector have an approximately rectangular distribution while the light efficiency can reach 96%. The analysis and simulation results show that the uniformity of illuminance can reach 05 over an area of 10 m×30 m when the LED lamp is installed at a height of 10 m. The reflector design when applied to shaping the LED beam into the rectangle shape has a high optical efficiency and low costs. The simulation results show that it can satisfy the current requirement for road lighting.
参考文献

[1] HAMM M,HUHN W. Design claims and technical solution steps generating the world first full LED headlamp[J]. SAE,2011,(01):0337.

[2] 罗毅,张贤鹏,毛霖,等.半导体照明中的非成像光学及其应用[J].中国激光,2008,35(7):963-971.

    LUO Y,ZHANG X P,MAO L,et al.. Non-imaging optics and its application in solid state lighting[J]. Chinese J. Lasers,2008,35(7):963-971(in Chinese)

[3] DING Y,LIU X,ZHENG Z,et al.. Freeform LED lens for uniform illumination[J]. Opt. Express, 2011,16(17):12958-12966.

[4] BENITEZ P,MINANO J C,BLEN J,et al.. Simultaneous multiple surface optical design method in three dimensions[J]. Opt. Eng.,2004,43(7):1489-1502.

[5] PELKA D G,PATEL K. An overview of LED applications forgeneral illumination[J]. SPIE,2003,5186:15-26.

[6] 丁毅,顾培夫. 实现均匀照明的自由曲面反射器[J].光学学报,2007,27(3):540-544.

    DING Y,GU P F. Freeform reflector for uniform illumination[J]. Acta Optica Sinica,2007,27(3):540-544.(in Chinese)

[7] 汪飞,隋成华,叶必卿.关于复合抛物面聚光器设计参数的研究[J].光学仪器,2010,26(3):46-48.

    WANG F,SUI CH H,YE B Q. The research about design parameter of compound parabolic concentrator[J]. Optical Instruments,2010,26(3):46-48.(in Chinese)

[8] 周镇,苏成悦,张春华,等.基于LED照明系统的反射器设计[J].广东工业大学学报,2011,28(4):26-29.

    ZHOU ZH,SU CH Y,ZHANG CH H. The design of a kind of reflectors based on LED lighting system[J]. J. Guangdong University Technol.,2011,28(4):26-29.(in Chinese)

[9] 吴仍茂,屠夫维,黄志华,等.LED照明系统的光照均匀性设计[J].光学技术,2011,35(1):74-76.

    WU R M,TU F W,HUANG ZH H,et al.. Illuminative uniformity design of a LED illumination system[J]. Opt. Technique,2011,35(1):74-76.(in Chinese)

[10] 王洪,张奇辉,张小凡.实现道路均匀照明的自由曲面反射器设计[J].光电工程,2009,36(12):143-146.

    WANG H,ZHANG H Q,ZHANG X F. Freeform reflector design for street uniform illumination[J]. Opto-Electronic Eng.,2009,36(12):143-146.(in Chinese)

赵亚辉, 范长江. 组合式发光二极管路灯反射器的设计[J]. 中国光学, 2012, 5(5): 520. ZHAO Ya-hui, FAN Chang-jiang. Design of combined reflectors used in LED street lamps[J]. Chinese Optics, 2012, 5(5): 520.

本文已被 9 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!