基于光学扫描法的导轨直线度测量方法

房传明; 陈长军

doi:doi:10.3969/j.issn.1005-5630.2015.02.001

光学仪器, 2015, 37 (2): 95, 网络出版: 2015-05-20

基于光学扫描法的导轨直线度测量方法

Straightness measurement of guide rail based on optical scanning method

论文大纲

房传明 ^*陈长军

作者单位

苏州大学机电工程学院,江苏苏州 215006

扫描测量直线度三测头法倾角补偿 scanning measurement straightness three-probe method tilt compensation

摘要

基于多测头光学扫描法对导轨直线度的在位测量方法,提出一种新的倾角补偿的三测头扫描方法。介绍了测量原理,推导了基于最小二乘法的直线度形状重构方法,重构出的形状可精确反映直线度误差的高频成分,且对测量噪声有良好抑制能力。对算法进行了仿真验证,并由实验验证了提出方法的有效性。实验结果表明,该方法可以精确地还原出台阶状的直线度形状,测量标准偏差在10 μm以内。

Abstract

An online measurement method of straightness is studied based on multi-probe optical scanning method. A three-probe scanning method with tilt compensation is proposed. Reconstructed form can accurately express the high frequency elements of the straightness error, and owns better suppression capability of the measurement noise. The measurement principle of the proposed method is introduced firstly. The construction algorithm of the straightness errors is deduced based on the least square solution and the computer simulation is performed. The experimental system is built for verificating the validity of the proposed method. The experimental results show that the proposed method can accurately reconstruct the straightness errors of step form, and the standard deviation is less than 10 micrometer.

参考文献

[1] 宁延平,刘战锋.国内外高精度直线度测量技术的研究现状［J］.现代制造工程,2005,30(6): 82-84.

[2] 柳常清,宋庆,孙占文,等.双PSD实现长直导轨四自由度测量的新方法［J］.光学仪器,2013,35(6): 26-30.

[3] 胡长德,陆加海,幸褀,等.基于激光干涉的长导轨直线度误差测量［J］.光学仪器,2008,30(6): 10-15.

[4] EVANS C J,HOCKEN R J,ESTLER W T.Self-calibration reversal,redundancy,error separation and‘absolute testing’［J］.CIRP Annals-Manufacturing Technology,1996,45(2): 617-634.

[5] TANAKA H,TOZAWA K,SATO H,et al.Application of a new straightness measurement method to large machine tool［J］.CIRP Annals-Manufacturing Technology,1981,30(1): 455-459.

[6] 张镭,张玉.时域二点法和三点法直线度EST的误差分析［J］.仪器仪表学报,1998,19(1): 106-108.

[7] GAO W.Self-zero-adjustment of probes in the methods constructing software datum for large profile measurement［J］.International Journal of JSPE,1996,30(4): 337-342.

[8] FUJIMOTO I,NISHIMURA K,PYOUN Y S.Autonomous calibration method of the zero-difference without using a standard gauge for a straightness-measuring machine［J］.Precision Engineering,2010,35(1): 153-163.

[9] KIYONO S,GAO W.Profile measurement of machined surface with a new diferential method［J］.Precision Engineering,1994,16(3): 212-218.

[10] GAO W,YOKOYAMA J,KOJIMA H,et al.Precision measurement of cylinder straightness using a scanning multi-probe system［J］.Precision Engineering,2002,26(3): 279-288.

房传明, 陈长军. 基于光学扫描法的导轨直线度测量方法[J]. 光学仪器, 2015, 37(2): 95. FANG Chuanming, CHEN Changjun. Straightness measurement of guide rail based on optical scanning method[J]. Optical Instruments, 2015, 37(2): 95.

基于光学扫描法的导轨直线度测量方法

关于本站 Cookie 的使用提示

全站搜索

基于光学扫描法的导轨直线度测量方法

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索