[1] KASTENSSON .Developing lightweight concepts in the automotive industry: taking on the environmental challenge with the SNtt project［J］.Journal of Cleaner Production, 2014, 66(66): 337-346.

[2] 马鸣图, 易红亮, 路洪洲, 等.论汽车轻量化［J］.中国工程科学, 2009, 11(9): 20-27.

    MA MINGTU, YI HONGLIANG, LU HONGZHOU, et al.On the light weight of automobile ［J］.Engineering Science, 2009, 11(9): 20-27.

[3] KIM H, KEOLEIAN G A, SKERLOS S J.Economic assessment of greenhouse gas emissions reduction by vehicle light weighting using aluminum and high-strength steel［J］.Journal of Industrial Ecology, 2015, 15(1): 64-80.

[4] QUINTINO L, COSTA A, MIRANDA R, et al.Welding with high power fiber lasers-a preliminary study［J］.Materials & Design, 2007, 28(4): 1231-1237.

[5] SUN Z, ION J C.Laser welding of dissimilar metal combinations［J］.Journal of Materials Science, 1995, 30(17): 4205-4214.

[6] 王振家, 潘勇琨, 方鸿生, 等.低碳Mn-Si-Cr系F/B复相钢的焊接性［J］.钢铁研究学报, 2005, 17(2): 43-47.

    WANG ZHENJIA, PAN YONGKUN, FANG HONGSHENG, et al.Weld ability of low carbon Mn-Si-Cr F / B duplex steel［J］.Journal of Iron and Steel Research, 2005, 17(2): 43-47.

[7] 高俊.跟随电弧对CP800高强钢激光焊接焊缝性能的影响［D］.上海: 上海交通大学, 2010.

    GAO JUN.Effect of following arc on the performance of CP800 high strength laser welded seam［D］.Shanghai: Shanghai Jiao Tong University, 2010.

[8] 韩坤, 李清山, 李健, 等.复相钢CP800焊缝冷裂纹敏感性研究［J］.上海金属, 2012, 34(1): 34-37.

    HAN KUN, LI QINGSHAN, LI JIAN, et al.Study on the sensitivity to cold crack of CP800 welded joint of multi-phase steel［J］.Shanghai Metals, 2012, 34(1): 34-37.

[9] MORAWIEC M, RASKI M, GRAJCAR A, et al.Effect of dual beam laser welding on microstructure-property relationships of hot-rolled complex phase steel sheets［J］.Archives of Civil & Mechanical Engineering, 2017, 17(1): 145-153.

[10] 金锦德.关于焊接热输入公式的探讨［J］.焊接, 2001(6): 42-43.

    JIN JINDE.A discussion on the heat input formula of welding［J］.Welding & Joining, 2001(6): 42-43.

[11] 曾其英.钢中合金元素对相变点 Ac1、Ac3影响的定量关系探讨［J］.理化检验: 物理分册, 1982, 18(5): 47-49.

    ZENG QIYING.Research on the quantitative relationship between alloying elements in steel and Ac1, Ac3 of transformation point［J］.Physical and Chemical Testing: Physics, 1982, 18(5): 47-49.

[12] 刘东宇, 李东, 李凯斌, 等.E36与304异种金属光纤激光焊接接头的组织分析［J］.激光与光电子学进展, 2015, 52(4): 101-107.

    LIU DONGYU, LI DONG, LI KAIBIN, et al.Microstructure analysis of dissimilar metal fiber laser welded joints of E36 and 304［J］.Laser & Optoelectronics Process, 2015, 52(4): 101-107.

[13] 郭鹏飞, 王晓南, 朱国辉, 等.X100管线钢光纤激光焊接头的显微组织及性能［J］.中国激光, 2017(12): 65-72.

    GUO PENGFEI, WANG XIAONAN, ZHU GUOHUI, et al.Microstructure and properties of X100 pipeline steel fiber laser welding head［J］.Chinese Journal of Lasers, 2017(12): 65-72.

[14] 许飞, 陈俐, 何恩光, 等.2024-T4铝合金光纤激光填丝焊缝成形与组织性能的相关性［J］.材料工程, 2017, 45(11): 90-95.

    XU FEI, CHEN LI, HE ENGUANG, et al.Relationship between the forming and microstructure and properties of 2024-T4 aluminum alloy fiber laser filler wire［J］.Journal of Materials Engineering, 2017, 45(11): 90-95.

[15] 许科华, 朱飞.焊接热输入对焊接接头金相组织的影响［J］.现代冶金, 2015, 43(5): 10-15.

    XU KEHUA, ZHU FEI.Effect of welding heat input on microstructure of welded joints［J］.Modern Metallurgy, 2015, 43(5): 10-15.

[16] 李允东, 董刚, 姚建华.激光修复28CrMoNiV钢热影响区的组织演变［J］.中国激光, 2016(8): 147-152.

    LI YUNDONG, DONG GANG, YAO JIANHUA.Microstructure evolution of heat-affected zone of 28CrMoNiV steel by laser［J］.Chinese Journal of Lasers, 2016(8): 147-152.

[17] 阎启.1 000 MPa级别超高强复相钢激光焊接组织及性能的研究［D］.上海: 上海交通大学, 2010.

    YAN QI.Microstructure and properties of 1 000 MPa ultra-high strength multi-phase steel by laser welding［D］.Shanghai: Shanghai Jiao Tong University, 2010.

[18] 王晓南, 郑知, 曾盼林, 等.800 MPa级高强钢光纤激光焊接接头微观结构对硬度及疲劳性能的影响［J］.中国激光, 2016(12): 115-124.

    WANG XIAONAN, ZHENG ZHI, ZENG PANLIN, et al.Effect of microstructure of 800 MPa high strength steel fiber laser welding joints on hardness and fatigue properties［J］.Chinese Journal of Lasers, 2016(12): 115-124.

[19] WANG X N, SUN Q, ZHENG Z, et al.Microstructure and fracture behavior of laser welded joints of DP steels with different heat inputs［J］.Materials Science & Engineering A, 2017(699): 18-25.

[20] XIA M S, ELLIOT BE B, TIAN Z L, et al.Effects of heat input and martensite on HAZ softening in laser welding of dual phase steels［J］.ISIJ international, 2008, 48(6): 809-814.

[21] 牛靖, 陈宏远, 刘甲, 等.X70大变形钢焊接接头热影响区软化及其影响研究［J］.热加工工艺, 2016(21): 176-179.

    NIU JING, CHEN HONGYUAN, LIU JIA, et al.Realization of heat-affected zone softening of X70 large deformed steel welded joint and its influence［J］.Hot Working Technology, 2016(21): 176-179.

[22] 范吉超.汽车用DP钢和TRIP钢激光拼焊板焊缝组织性能研究［D］.济南: 山东建筑大学, 2015.

    FAN JICHAO.Study on microstructure and mechanical properties of weld seam for automotive tailored welds of DP steel and TRIP steel ［D］.Jinan: Shandong Jianzhu University, 2015.

[23] 侯敬超, 计云萍, 刘宗昌, 等.20MnCrNi2MoRE钢贝氏体回火过程［J］.材料热处理学报, 2015, 36(1): 114-118.

    HOU JINGCHAO, JI YUNPING, LIU ZONGCHANG, et al.Tempering of 20MnCrNi2MoRE steel bainite［J］.Transaction of Materials and Heat Treatment, 2015, 36(1): 114-118.

[24] 孙超, 杨善武, 王宪, 等.低碳钢中贝氏体组织在A1温度以下重加热过程中的演化与热稳定性［J］.北京科技大学学报, 2013, 35(7): 875-881.

    SUN CHAO, YANG SHANWU, WANG XIAN, et al.Change and thermal stability of bainite in mild steel during reheating below A1［J］.Journal of University of Science and Technology Beijing, 2013, 35(7): 875-881.

[25] 张楠, 董现春, 章军.回火工艺对低碳贝氏体高强钢组织与性能的影响［J］.材料热处理学报, 2013, 34(8): 1-6.

    ZHANG NAN, DONG XIANCHUN, ZHANG JUN.Effect of tempering technology on microstructure and properties of low carbon bainitic high strength steel［J］.Transaction of Materials and Heat Treatment, 2013, 34(8): 1-6.

[26] 谢盼.Fe-Mn-Al-Si系TRIP/TWIP钢激光焊接及其接头的组织性能研究［D］.长沙: 湖南大学, 2013.

    XIE PAN.Research on microstructure and mechanical properties of Fe-Mn-Al-Si TRIP/TWIP steel by laser welding and its joints［D］.Changsha: Hunan University, 2013.