激光复合溶胶凝胶法制备TiC强化涂层的工艺研究
曾启, 张群莉, 徐柠, 姚建华. 激光复合溶胶凝胶法制备TiC强化涂层的工艺研究[J]. 激光与光电子学进展, 2012, 49(7): 071602.
Zeng Qi, Zhang Qunli, Xu Ning, Yao Jianhua. Research on Technics of TiC Hardened Coating Prepared by Hybrid Process of Laser and Sol-Gel[J]. Laser & Optoelectronics Progress, 2012, 49(7): 071602.
[1] 刘阳, 曾令可. 碳化钛陶瓷及应用［M］. 北京: 北京工业出版社, 2008
Liu Yang, Zeng Lingke. Titanium Carbide Ceramics and Application［M］. Beijing: Beijing Industry Press, 2008
[2] Qu Shiyao, Wang Xinhong, Zhang Min et al.. Microstructure and wear properties of Fe-TiC surface composite coating by laser cladding［J］. J. Mater. Sci., 2008, 43(5): 1546～1551
[3] 辛艳辉, 林建国, 任志昂. Ti-Al-Cr-Nb-V合金激光表面原位TiC颗粒增强涂层及耐磨性研究［J］. 材料热处理学报, 2004, 25(4): 63～66
Xin Yanhui, Lin Jianguo, Ren Zhiang. Microstructure characteristics and wear resistance of TiC particle reinforced coatings by laser surface alloying in a Ti-Al-Cr-Nb-V alloy［J］. Transactions of Materids and Heat Treatment, 2004, 25(4): 63～66
[4] W. H. Jiang, R. Kovacevic. Laser deposited TiC/H13 tool steel composite coatings and their erosion resistance ［J］. J. Mater. Process. Technol., 2007, 186(1-3): 331～338
[5] R. L. Sun, Y. W. Lei, W. Niu. Laser clad TiC reinforced NiCrBSi composite coatings on Ti-6Al-4V alloy using a CW CO2 laser ［J］. Surf. Coat. Technol., 2009, 203(10-11): 1395～1399
[6] Yang Sen, Liu Wenjin, Zhong Minlin. TiC reinforced composite coating produced by powder feeding laser cladding ［J］. Mater. Lett., 2004, 58(24): 2958～2962
[7] 陈威, 马向平, 冯建林. 铝合金表面SHS辅助激光熔覆TiCNi涂层工艺研究［J］. 热加工工艺, 2009, 38(10): 131～134
Chen Wei, Ma Xiangping, Feng Jianlin. Study on process of laser cladding TiCNi coating on Al alloy by SHS reaction［J］. Hot Working Technology, 2009, 38(10): 131～134
[8] 田永生, 陈传忠, 王德云 等. 钛表面激光碳合金化与TiC生长分析［J］. 激光技术, 2005, 29(2): 113～117
[9] G. A. Swift, R. Koc. Formation studies of carbon coater TiO2［J］. J. Mater. Sci., 1999, 34(13): 3083～3093
[10] Henry Preiss, Lutz-Michael Berger, Dietrich Schultze. Studies on the carbothermal preparation of titanium carbide from different gel precursors［J］. J. Eur. Ceram. Soc., 1999, 19(2): 195～206
[11] 宋谋胜, 刘忠侠, 李继文 等. 加钛方式与钛含量对A356合金组织和性能的影响［J］. 中国有色金属学报, 2004, 14(10): 1729～1735
Song Mousheng, Liu Zhongxia, Li Jiwen et al.. Effect of titanium alloying manner and titanium content on microstructure and mechanical properties of A365 alloys［J］. Chinese of J. Nonferrous Metals, 2004, 14(10): 1729～1735
曾启, 张群莉, 徐柠, 姚建华. 激光复合溶胶凝胶法制备TiC强化涂层的工艺研究[J]. 激光与光电子学进展, 2012, 49(7): 071602. Zeng Qi, Zhang Qunli, Xu Ning, Yao Jianhua. Research on Technics of TiC Hardened Coating Prepared by Hybrid Process of Laser and Sol-Gel[J]. Laser & Optoelectronics Progress, 2012, 49(7): 071602.
PDF全文
