应用激光, 2005, 25 (5): 313, 网络出版: 2006-05-10   

激光表面熔凝温度场的二维数值模型

Two-Dimensional Numerical Model of Temperature Field during Laser Surface Remelting
作者单位
1 内蒙古工业大学,呼和浩特,010062
2 西北工业大学凝固技术国家重点实验室,西安,710072
3 清华大学机械工程系,北京,100084
摘要
建立了激光表面快速熔凝条件下温度场的二维数值模型,并利用有限差分法对Cu-Mn合金在激光表面快速熔凝条件下的温度场进行了计算.计算结果表明该模型能准确描述激光表面快速凝固条件下熔池的温度场信息,而且在保证计算精度的条件下简化了计算(相对于三维).计算结果与实验结果相吻合.
Abstract
A new two-dimensional numerical model has been set up to be used to calculate the temperature field during laser surface remelting.The finite difference scheme on non-equidistant mesh is used during calculation.The calculation results on Cu-Mn alloy shows that this model can accurately describe the temperature field of the molten pool and simplify caculation compared with three-dimensional models.The calculation results agree with that of experiment.
参考文献

[1] S.J. Review,et al, J Mater Sci, 1994;29:5232

[2] Zimmerman M, et al, Mater Sci & Eng 1991;134A:1278-1282

[3] Gill S C, et al, Acta Metall. Mater. 1992;40:2895-2906

[4] M.Rappaz, et al, Helv Phys Acta,1987;60:

[5] J.Mazumder et al, J Appl. Phys. 1980;51:941

[6] S.Kou ,et al, Metall Trans B,1981;12B:33

[7] H.R.Shercliff, et al, Metall. Trans., 1991;22A:2459

[8] A.F.A.Hoadley,et al, Metall Trans B,1991;22B:101

[9] Schievenbusch A, et al, Z.Metallkd. 1995;86:614.

[10] E.A.Brandes et al, Smithells Metals Reference Book. Butterworth Heinemann Ltd, 1992

杨森, 刘振侠, 刘文今, 黄卫东, 周尧和. 激光表面熔凝温度场的二维数值模型[J]. 应用激光, 2005, 25(5): 313. 杨森, 刘振侠, 刘文今, 黄卫东, 周尧和. Two-Dimensional Numerical Model of Temperature Field during Laser Surface Remelting[J]. APPLIED LASER, 2005, 25(5): 313.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!