[1] 李圣怡, 戴一帆. 大中型光学非球面镜制造与测量新技术［M］. 北京: 国防工业出版社, 2011.

    LI SH Y, DAI Y F. New Technology for Manufacturing and Measurement of Large and Middle-Scale Aspheric Surfaces［M］. Beijing: National Defense Industry Press, 2011. (in Chinese)

[2] 殷龙海, 王孝坤, 李龙响, 等. 大口径SiC离轴非球面的高效磨削加工［J］. 光学 精密工程, 2015, 23(9): 2497-2505.

    YIN L H, WANG X K, LI L X, et al.. Fast grinding of large SiC off-axis aspheric surface［J］. Opt. Precision Eng., 2015, 23(9): 2497-2505. (in Chinese)

[3] GUO Y B, CHEN B K, ZHANG Y, et al.. Research on parallel grinding method of non-axisymmetric aspheric lens［J］. Chinese Journal of Mechanical Engineering, 2004, 17(1): 149-151.

[4] 张宁宁, 王振忠, 潘日, 等. 平行磨削非轴对称非球面光学元件表面形貌［J］. 强激光与粒子束, 2012, 24(6): 1391-1395.

    ZHANG N N, WANG ZH ZH, PAN R, et al.. Surface topography of parallel grinding process for nonaxisymmetric aspheric lens［J］. High Power Laser and Particle Beams, 2012, 24(6): 1391-1395. (in Chinese)

[5] 周旭光, 阎秋生, 孔令叶, 等. 砂轮几何参数对非球面轨迹包络磨削的影响研究［J］. 工具技术, 2015, 49(8): 23-26.

    ZHOU X G, YAN Q SH, KONG L Y, et al.. Effect of wheel geometry parameters in grinding aspheric with AEGM［J］. Tool Engineering, 2015, 49(8): 23-26. (in Chinese)

[6] 柯晓龙, 林晓辉, 王健, 等. 圆弧砂轮修整评价及非球面磨削误差补偿技术［J］. 强激光与粒子束, 2015, 27(4): 187-191.

    KE X L, LIN X H, WANG J, et al.. Evaluation of cup-wheel truing and error compensation in aspheric grinding［J］. High Power Laser and Particle Beams, 2015, 27(4):044102. (in Chinese)

[7] 林晓辉, 马凯威, 黄海滨, 等. 轴对称非球面磨削表面粗糙度和波纹度的分布特性［J］. 强激光与粒子束, 2015, 27(9): 092013.

    LIN X H, MA K W, HUANG H B, et al.. Distribution characteristics of surface roughness and waviness error in axisymmetric aspheric grinding［J］. High Power Laser and Particle Beams, 2015, 27(9): 092013. (in Chinese)

[8] MCDONALD A, BAUER R, WARKENTIN A. Design and validation of a grinding wheel optical scanner system to repeatedly measure and characterize wheel surface topography［J］. Measurement, 2016, 93: 541-551.

[9] MCDONALD A, MOHAMED A M O, WARKENTIN A, et al.. Kinematic simulation of the uncut chip thickness and surface finish using a reduced set of 3D grinding wheel measurements［J］. Precision Engineering, 2017, 49: 169-178.

[10] 崔长彩, 余卿, 张遨, 等. 金刚石砂轮表面形貌测量系统［J］. 光学 精密工程, 2014, 22(12): 3167-3174.

    CUI CH C, YU Q, ZHANG A, et al.. Measurement system of surface topography for diamond grinding wheel［J］. Opt. Precision Eng., 2014, 22(12): 3167-3174. (in Chinese)

[11] 李瑞旭, 崔长彩, 王爽, 等. 基于粒子群优化算法的砂轮三维形貌匹配［J］. 计算机工程与应用, 2016, 52(11): 265-270.

    LI R X, CUI CH C, WANG SH, et al.. 3D topography matching of diamond grinding wheel based on particle swarm optimization［J］. Computer Engineering and Applications, 2016, 52(11): 265-270. (in Chinese)

[12] 杜晗, 陈根余, 周聪, 等. 光纤激光在线整形金刚石砂轮检测系统设计［J］. 激光技术, 2016, 40(6): 930-934.

    DU H, CHEN G Y, ZHOU C, et al.. Design of detection system of fiber laser online shaping diamond wheel［J］. Laser Technology, 2016, 40(6): 930-934. (in Chinese)

[13] 柯晓龙, 刘建春, 黄海滨. 圆弧金刚石砂轮精密在位检测系统设计［J］. 厦门理工学院学报, 2013, 21(3): 21-25.

    KE X L, LIU J CH, HUANG H B. Research on precision on-machine measuring technology for arc diamond wheel［J］. Journal of Xiamen University of Technology, 2013, 21(3): 21-25. (in Chinese)

[14] 李兵, 孙彬, 陈磊, 等. 激光位移传感器在自由曲面测量中的应用［J］. 光学 精密工程, 2015, 23(7): 1939-1947.

    LI B, SUN B, CHEN L, et al.. Application of laser displacement sensor to free-form surface measurement［J］. Opt. Precision Eng., 2015, 23(7): 1393-1947. (in Chinese)

[15] 毕超, 房建国, 刘京亮, 等. 基于球形目标的激光位移传感器光束方向标定［J］. 光学 精密工程, 2015, 23(3): 678-685.

    BI CH, FANG J G, LIU J L, et al.. Calibration of beam direction of laser displacement sensor based on spherical target［J］. Opt. Precision Eng., 2015, 23(3): 678-685. (in Chinese)

[16] 彭希锋, 陈爽, 李海星, 等. 几何功能约束最小二乘法双短圆弧检测［J］. 中国测试, 2016, 42(9): 36-40, 45.

    PENG X F, CHEN SH, LI H X, et al.. A measuring method for double short circular arcs based on least square fitting met-hod with geometric usage constraint［J］. China Measurement & Test, 2016, 42(9): 36-40, 45. (in Chinese)

[17] 周京博, 李增强, 王亚奇, 等. 微圆弧金刚石刀具刀尖圆弧的测量及评价［J］. 纳米技术与精密工程, 2013, 11(4): 334-340.

    ZHOU J B, LI Z Q, WANG Y Q, et al.. Tool tip arc measurement and characterization of micro-arc diamond tools［J］. Nanotechnology and Precision Engineering, 2013, 11(4): 334-340. (in Chinese)