一种基于LED扩展光源的均匀照明设计新方法

徐超; 高淑梅; 苏宙平; 钱维莹; 刘诚

doi:doi:10.3788/lop51.022203

激光与光电子学进展, 2014, 51 (2): 022203, 网络出版: 2014-01-21

一种基于LED扩展光源的均匀照明设计新方法下载： 961次

A New Optical Design Method of Uniform Illumination Based on Extended LED Source

论文大纲

徐超 ^*高淑梅苏宙平钱维莹刘诚

作者单位

江南大学理学院, 江苏无锡 214000

光学设计 COB型LED 自动优化均匀照明反射器 optical design chips-on-board type LED automatic optimization uniform illumination reflector

摘要

为满足LED均匀照明要求，提出了一种实现面光源下自动优化的设计方法。根据点光源近似理论建立可实现均匀照明的反射器初始结构，用COB(Chips on board)型LED面型光源替代点光源，基于TracePro中Scheme语言编写了自定义均匀照明优化函数，实现了目标面上均匀照明的自动优化设计。模拟结果表明：在光源为直径20 mm的朗伯体发光LED时，能够在300 mm处实现均匀照明，照明均匀度（平均照度与最大照度的比值）达到85%以上，光学效率在96%以上。本设计方法简单易用，具有广泛的应用价值。

Abstract

To meet the requirement of uniform illumination, a new automatic optimization design method for LED extended source is proposed. According to point source approximation theory, a reflector for uniform illumination is established. With chips-on-board (COB) type LED source replacing point source, our approach is used to achieve uniform illumination on the target plane with optimized illumination function defined by the “scheme” language in TracePro. A Lambert emission of LED with diameter of 20 mm is used as simulation source. The result shows that our optimization method works well with uniformity (the ratio of average illumination to the maximum illumination) of 85% or more and optical coupling efficiency of 96% or more at the target plane 300 mm away from the source. This design method is easy and useful, with a wide range of applications.

参考文献

[1] 罗毅, 张贤鹏, 王霖, 等. 半导体照明中的非成像光学及其应用[J]. 中国激光, 2008, 35(7): 963-971.

Luo Yi, Zhang Xianpen, Wang Lin, et al.. Non-imaging optics and its application in solid state lighting[J]. Chinese J Lasers, 2008, 35(7): 963-971.

[2] 罗毅, 冯泽心, 韩彦军, 等. 面向半导体照明的光学[J]. 光学学报, 2011, 31(9): 0900117.

Luo Yi, Feng Zexin, Han Yanjun, et al.. Optics in solid state lighting[J]. Acta Optica Sinica, 2011, 31(9): 0900117.

[3] Kai Wang, Fei Chen, Zongyuan Liu, et al.. Design of compact freeform lens for application specific light-emitting diode packaging[J]. Opt Express, 2010, 18(2): 413-425.

[4] 赖伟, 陈伟民, 刘显明, 等. 发光二极管路灯光强空间分布的非线性优化设计[J]. 光学学报, 2012, 32(1): 0122003.

Lai Wei, Chen Weimin, Liu Xianming, et al.. Nonlinear optimization of light intensity spatial distribution for LED road luminaires[J]. Acta Optica Sinica, 2012, 32(1): 0122003.

[5] 王洪, 张小凡, 杜乃锋, 等. 面向大功率LED集成光源的反射器设计方法[J]. 红外与激光工程, 2011, 40(7): 1282-1286.

Wang Hong, Zhang Xiaofan, Du Naifeng, et al.. Reflector design method of integrated high-power LED light source[J]. Infrared and Laser Engineering, 2011, 40(7): 1282-1286.

[6] P Benitez, J C Minano, J Blen, et al.. Simultaneous multiple surface optical design method in three dimensions[J]. Opt Eng, 2004, 43(7): 1489-1502.

[7] 张航, 梁雪, 严金华, 等. LED准直器设计中复合抛物面同步多曲面方法[J]. 光学学报, 2012, 32(9): 0922004.

Zhang Hang, Liang Xue,Yan Jinhua, et al.. Compoud parabolic-simultaneous multiple surfaces design methods for LED collimators[J]. Acta Optica Sinica, 2012, 32(9): 0922004.

[8] J Bortz, N Shatz. Generalized functional method of nonimaging optical design[C]. SPIE, 2006, 6338: 633805.

[9] J Bortz, N Shatz. Iterative generalized functional method of nonimaging optical design[C]. SPIE, 2007, 6670: 66700A.

[10] F R Fournier, W J Cassarly, J P Rolland. Optimization of single reflectors for extended sources[C]. SPIE, 2008, 7103: 710301.

[11] Yi Luo, Zexin Feng, Yanjun Han, et al.. Design of compact and smooth free-form optical system with uniform illuminance for LED source[J]. Opt Express, 2010, 18(9): 9055-9063.

[12] 丁毅, 顾培夫. 实现均匀照明的自由曲面反射器[J]. 光学学报, 2007, 27(3): 540-544.

Ding Yi, Gu Peifu. Freeform reflector for uniform illumination[J]. Acta Opitca Sinica, 2007, 27(3): 540-544.

[13] 丁毅. 自由曲面光学器件的设计及其在照明系统中的应用[D]. 杭州: 浙江大学信息学院, 2009. 15-16.

Ding Yi. Freeform Optics Design and Its Application in the Lighting System[D]. Hangzhou: Zhejiang University, 2009. 15-16.

[14] J S Schruben. Analysis of rotationally symmetric reflectors for illuminatsing systems[J]. J Opt Soc Am, 1974, 64(1): 55-58.

[15] 杨毅, 钱可元, 罗毅, 等. 一种新型的基于非成像光学LED均匀照明系统[J]. 光学技术, 2007, 33(1): 110-112, 115.

Yang Yi, Qian Keyuan, Luo Yi, et al.. A novel LED uniform illuminance system based on nonimaging optics[J]. Optical Technology, 2007, 33(1): 110-112, 115.

[16] 李林, 王光珍, 王丽莉, 等. 实现均匀照明的LED系统设计方法[J]. 光学学报, 2012, 32(2): 0222002.

Li Lin, Wang Guangzhen, Wang Lili, et al.. Lens design for uniform illumination with LED[J]. Acta Optica Sinica, 2012, 32(2): 0222002.

[17] Yi Ding, Xu Liu, Zhenrong Zheng, et al.. Freeform LED lens for uniform illumination[J]. Opt Express, 2008, 16(17): 12958-12966.

[18] John Bortz. Optimal design of a nonimaging projection lens for use with all LED source and a rectangular target[C]. SPIE, 2000, 4092: 130-138.

[19] Kudaev S, Schreiber P. Automated optimization of non-imaging optics for luminaires[C]. SPIE, 2005, 5962: 59620B.

[20] 苏宙平, 阙立志, 朱焯炜, 等. 用于光源准直的紧凑型光学系统设计[J]. 激光与光电子学进展, 2012, 49(2): 022203.

Su Zhouping, Que Lizhi, Zhu Zhuowei, et al.. Optical system design of the compact collimator for LED source[J]. Laser & Optoelectronics Progress, 2012, 49(2): 022203.

[21] 张奇辉. 大功率LED照明系统光学设计方法研究[D]. 广州: 华南理工大学, 2010. 39-40.

Zhang Qihui. Study on Optical Design Method of High-Power LED Lighting System[D]. Guangzhou: South China University of Technology, 2010. 39-40.

[22] 闫兴涛, 杨建峰, 张国琦, 等. 基于补偿法的均匀照明自由曲面LED反光杯设计[J]. 红外与激光工程, 2012, 41(3): 718-723.

Yan Xingtao, Yang Jianfeng, Zhang Guoqi, et al.. Design of freeform surface LED reflectors for uniform illumination based on compensation method[J]. Infrared and Laser Engineering, 2012, 41(3): 718-723.

徐超, 高淑梅, 苏宙平, 钱维莹, 刘诚. 一种基于LED扩展光源的均匀照明设计新方法[J]. 激光与光电子学进展, 2014, 51(2): 022203. Xu Chao, Gao Shumei, Su Zhouping, Qian Weiying, Liu Cheng. A New Optical Design Method of Uniform Illumination Based on Extended LED Source[J]. Laser & Optoelectronics Progress, 2014, 51(2): 022203.

一种基于LED扩展光源的均匀照明设计新方法下载： 961次

关于本站 Cookie 的使用提示

全站搜索

一种基于LED扩展光源的均匀照明设计新方法 下载： 961次

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索

一种基于LED扩展光源的均匀照明设计新方法下载： 961次