[1] 董辰辉, 姚建华, 胡晓冬, 等.激光熔覆载气式同轴送粉三维气流流场的数值模拟［J］.中国激光, 2010, 37(1): 261-265.

    DONG CHENHUI, YAO JIANHUA, HU XIAODONG, et al.Three dimensional numerical simulation of coaxial powder feeding flow with carrying gas［J］.Chinese Journal of Lasers, 2010, 37(1): 261-265.

[2] TSENG W C, AOH J N.Simulation study on laser cladding on preplaced powder layer with a tailored laser heat source［J］.Optics & Laser Technology, 2013(48): 141-152.

[3] 占焕校, 王勇, 韩涛, 等.激光宽带加工数值模拟中的热源模型［J］.材料热处理学报, 2007, 28(6): 156-160.

    ZHAN HUANXIAO, WANG YONG, HAN TAO, et al.Heat source model in numerical simulation of laser wide-band processing［J］.Transactions of Materials and Heat Treatment, 2007, 28(6): 156-160.

[4] PARISA FARAHMAND, RADOVAN KOVACEVIC.An experimental-numerical investigation of heat distribution and stress field in single-and multi-track laser cladding by a high-power direct diode laser［J］.Optics & Laser Technology, 2014(6): 154-168.

[5] BRUCKER F, LEPSKI D, BEYER E.Modeling the influence of process parameters and additional heat sources on residual stresses in laser cladding［J］.Journal of Thermal Spray Technology, 2007, 16(3): 355-373.

[6] 程广萍, 李明喜, 何宜柱, 等.激光熔覆层温度场和应力场的数值模拟［J］.热处理, 2009, 24(4): 49-54.

    CHENG GUANGPING, LI MINGXI, HE YIZHU, et al.Numerical simulation of temperature field and stress field in laser clad coating［J］.Heat Treatment, 2009, 24(4): 49-54.

[7] 刘昊, 虞钢, 何秀丽, 等.送粉式激光熔覆中瞬态温度场与几何形貌的三维数值模拟［J］.中国激光, 2013, 40(12): 1203007.

    LIU HAO, YU GANG, HE XIULI, et al.Three-dimensiona numerical simulation of transient temperature field and coating geometry in powder feeding laser cladding［J］.Chinese Journal of Lasers, 2013, 40(12): 1203007.

[8] KOISTINEN D P, MARBURGER R E.A general equation prescribing the extent of the austenite-martensite transformation in pure iron-carbon alloys and plain carbon steels［J］.Acta Metallurgica, 1959, 7(1): 59-60.

[9] 薛忠明, 曲文卿, 柴鹏, 等.焊接变形预测技术研究进展［J］.焊接学报, 2003, 24(3): 87-91.

    XUE ZHONGMING, QU WENQING, CHAI PENG, et al.Review on prediction of welding distortion［J］.Transactions of the China Welding Institution, 2003, 24(3): 87-91.

[10] LI CHAOWEN, WANG YONG, HAN BIN.Microstructure, hardness and stress in melted zone of 42CrMo steel by wide-band laser surface melting［J］.Optics and Lasers in Engineering, 2011, 49(4): 530-535.

[11] 李美艳, 韩彬, 蔡春波, 等.激光熔覆镍基合金温度场和应力场数值模拟［J］.焊接学报, 2015, 36(05): 25-28.

    LI MEIYAN, HAN BIN, CAI CHUNBO, et al.Numerical simulation on temperature and stress fields of laser cladded Ni-based coating［J］.Transactions of the China Welding Institution, 2015, 36(5): 25-28.

[12] 赵忠魁.金属材料学及热处理技术［M］.北京: 国防工业出版社, 2012: 10, 25-26.

[13] 朱明.材料热处理原理及工艺［M］.徐州: 中国矿业大学出版社, 2013: 72-73, 83, 107.

[14] MCDONALD G, HPENDRICKS R C.Effect of thermal cycling on ZrO2-Y2O3 thermal barrier coatings［J］.Thin Solid Films, 1980, 73(10): 491-496.