[1] R Fabbro, J Fournier, P Ballard, et al.. Physical study of laser-produced plasma in confined geometry[J]. J Appl Phy, 1990, 68(2): 775-784.

[2] Charles S Montross, Tao Wei, Lin Ye, et al.. Laser shock processing and its effects on microstructure and properties of metal alloys: a review[J]. International J Fatigue, 2002, 24(10): 1021-1036.

[3] 李伟, 李应红, 何卫锋, 等. 激光冲击强化技术的发展和应用[J]. 激光与光电子学进展, 2008, 45(12): 15-19.

    Li Wei, LiYinghong, He Weifeng, et al.. Development and application of laser shock processing[J]. Laser & Optoelectronics Progress, 2008, 45(12): 15-19.

[4] P Peyre, R Fabbro, P Merrien, et al.. Laser shock processing of aluminium alloys: application to high cycle fatigue behavior[J]. Materials Science and Engineering A, 1996, 210(1-2): 102-113.

[5] Zhou Lei, He Weifeng, Wang Xuede. Effect of laser shock processing on high cycle properties of 1Cr11Ni2W2MoV stainless steel[J]. Rare Materials and Engineering, 2011, 40(s4): 174-177.

[6] Hyuntaeck Lim, Pilkyu Kim, Hoemin Jeong, et al.. Enhancement of abrasion and corrosion resistance of duplex stainless steel by laser shock peening[J]. J Materials Processing Technology, 2012, 212(6): 1347-1354.

[7] W. Sagawaa, T. Aokib, T. Itoua, et al.. Stress corrosion cracking countermeasure observed on Ni-based alloy welds of BWR core support structure[J]. Nuclear Engineering and Design, 2009, 239(4): 655-664.

[8] 邹世坤, 王健, 王华明, 等. 激光冲击处理金属板材后的裂纹扩展速率[J]. 激光技术, 2002, 26(3):189-191.

    Zou Shikun, Wang Jian, Wang Huaming, et al.. Fatigue growth rate of laser shock processed metal sheet[J]. Laser Technology, 2002, 26(3): 189-191.

[9] 任旭东, 张田, 张永康, 等. 激光冲击处理提高00Cr12 合金的疲劳性能[J]. 中国激光, 2010, 37(8): 2111-2115.

    Ren Xudong, Zhang Tian, Zhang Yongkang, et al.. Improving fatigue properties of 00Cr12 alloy by laser shock processing[J]. Chinese J lasers, 2010, 37(8): 2111-2115.

[10] 吴边, 王声波, 郭大浩, 等. 强激光冲击铝合金改性处理研究[J]. 光学学报, 2005, 25(10): 1352-1356.

    Wu Bian, Wang Shengbo, Guo Dahao, et al.. Research of material modification induced by laser shock processing on aluminum alloy[J]. Acta Optica Sinica, 2005, 25(10): 1352-1356.

[11] 曹子文, 邹世坤, 刘方军, 等. 激光冲击处理1Cr11Ni2W2MoV不锈钢[J]. 中国激光, 2008, 35(2): 316-320.

    Cao Ziwen, Zou Shikun, Liu Fangjun, et al.. Laser shock processing on 1Cr11Ni2W2MoV martensite steel[J]. Chinese J Lasers, 2008, 35(2): 316-320.

[12] 王声波, 范勇, 吴鸿兴, 等. 7050 航空铝合金结构材料激光冲击强化处理研究[J]. 中国激光, 2004, 31(1): 125-128.

    Wang Shengbo, Fan Yong, Wu Hongxing, et al.. Research of strengt hening 7050 aerial aluminum alloy structural material with laser shock processing[J]. Chinese J Lasers, 2004, 31(1): 125-128.

[13] 李伟, 何卫锋, 李应红, 等.激光冲击强化对k417材料振动疲劳性能的影响[J]. 中国激光, 2009, 36(8): 2197-2201.

    Li Wei, He Weifeng, Li Yinghong, et al.. Effects of laser shock processing on vibration fatigue properties of K417 material[J]. Chinese J Lasers, 2009, 36(8): 2197-2201.

[14] 汪诚, 任旭东, 周鑫, 等. 激光冲击对GH742镍基合金疲劳短裂纹扩展的影响[J]. 金属热处理学报, 2009, 34(7): 57-60.

    Wang Cheng, Ren Xudong, Zhou Xin, et al.. Influence of laser shock processing on short crack growth of GH742 nickel-base alloy[J]. Heat Treatment of Metals, 2009, 34(7): 57-60.

[15] 何卫锋, 李应红, 李伟, 等. 激光冲击强化提高压气机叶片疲劳性能研究[J]. 航空动力学报, 2011, 26(7): 1551-1556.

    He Weifeng, Li Yinghong, Li Wei, et al.. Laser shock peening on vibration fatigue behavior of compressor blade[J]. J Aerospace Power, 2011, 26(7): 1551-1556.

[16] J Z Lu, K Y Luo, Y K Zhang, et al.. Grain refinement mechanism of multiple laser shock processing impacts on ANSI 304 stainless steel[J]. Acta Materialia, 2010, 58(16): 5354-5362.

[17] J Z Lu, K Y Luo, Y K Zhang, et al.. Grain refinement of LY2 aluminum alloy induced by ultra-high plastic strain during multiple laser shock processing impacts[J]. Acta Materialia, 2010, 58(11): 3984-3994.

[18] 《航空制造工程手册》总编委会. 航空制造工程手册[M]. 北京: 航空工业出版社, 1997. 235-237.

    “Aeronautical Manufacture Engineering Handbook” Edits Committee. Aeronautical Manufacture Engineering Handbook[M]. Beijing: Aerospace Industry Press, 1997. 235-237.

[19] 王学德, 李应红, 李启鹏, 等. TC6钛合金激光喷丸纳米组织特性及热稳定性研究[J]. 南京航空航天大学学报, 2012, 29(1): 68-76.

    Wang Xuede, Li Yinghong, Li Qipeng, et al.. Property and thermostablity study on TC6 titanium alloy nanostructure processed by LSP[J]. Journal of Nanjing University of Aeronautics & Atronautics, 2012, 29(1): 68-76.

[20] Xiangfan Nie, Weifeng He, Liucheng Zhou, et al.. Effects of laser shock peening on TC11 titanium alloy with different impacts[J]. Advance Materials Research, 2013, 681: 266-270.

[21] Zhou Lei, He Weifeng, Wang Xuede. Effect of laser shock processing on high cycle properties of 1Cr11Ni2W2MoV stainless steel[J]. Rare Materials and Engineering, 2011, 40(s4): 174-177.

[22] 周磊, 李应红, 翟旭生, 等. 利用激光冲击强化提高均压孔结构的疲劳寿命[J]. 南京航空航天大学学报, 2010, 42(3): 379-382.

    Zhou Lei, Li Yinghong, Zhai Xusheng, et al.. Fatigue-life improvement of symmetrical pressure hole by laser shock processing[J]. Journal of Nanjing University of Aeronautics & Astronautics, 2010, 42(3): 379-382.

[23] 马壮. 航空发动机部件激光冲击强化应用基础研究[D]. 西安: 空军工程大学工程学院, 2008. 37-38.

    Ma Zhuang. Fundamental Research on Laser Shock Processing Used on Aero-Engine Parts[D]. Xi′an: Engineering Institute of Air Force University, 2008. 37-38.

[24] N E Frost, K J Marsh, L P Pook. Metal Fatigue[M]. London: Oxford Univ Press, 1974. 130-195.