[1] 孙蓉. 海水中钢铁材料上阴极氧气还原反应研究[D]. 重庆: 重庆大学, 2007.

    Sun Rong. Study on Cathodic Oxygen Reduction Reaction at Steel in Seawater[D]. Chongqing: Dissertation of Chongqing University, 2007.

[2] 李晓刚, 董超芳, 高瑾, 等. 中国钢铁材料大气腐蚀科学研究和数据共享网络建设[J]. 金属世界, 2010, 4: 1-8.

    Li Xiaogang, Dong Chaofang, Gao Jin, et al.. The scientific research and data-sharing network of steels atmosphere corrosion in China [J]. Metal World, 2010, 4: 1-8.

[3] 魏敏先. 严酷工况下钢铁材料的氧化磨损及轻微—严重磨损转变[D]. 江苏: 江苏大学, 2011.

    Wei Minxian. Oxidation Wear and Mild-to-Severe Wear Transition of Ferrous Alloy under Severe Condition[D]. Jiangsu: Jiangsu University, 2011.

[4] 张永振, 朱均, 刘维民, 等. 不同滑动干摩擦条件下钢/铁摩擦副的摩擦磨损性能与表面形貌特征研究[J]. 摩擦学学报, 2001, 21(1): 37-41.

    Zhang Yongzhen, Zhu Jun, Liu Weimin, et al.. Investigation of topographical characteristics and tribological behavior of compacted graphite iron in sliding against 40Cr steel under different dry sliding conditions[J]. Tribology, 2001, 21(1): 37-41.

[5] 刘顺洪. 激光制造技术[M]. 武汉: 华中科技大学出版社, 2011.

    Liu Shunhong. Laser Materials Processing[M]. Wuhan: Huazhong University of Science and Technology Press, 2011.

[6] 王东生, 田宗军, 沈理达, 等. 激光表面熔覆制备纳米结构涂层的研究进展[J]. 中国激光, 2008, 35(11): 1698-1709.

    Wang Dongsheng, Tian Zongjun, Shen Lida, et al.. Research development of nanostructured coatings prepared by laser cladding[J]. Chinese J Lasers, 2008, 35(11): 1698-1709.

[7] 冯淑容, 张述泉, 王华明. 钛合金激光熔覆硬质颗粒增强金属间化合物复合涂层耐磨性[J]. 中国激光, 2012, 39(2): 0203002.

    Feng Shurong, Zhang Shuquan, Wang Huaming. Wear resistance of laser clad hard particles reinforce intermetallic composite coating on TA15 alloy[J]. Chinese J Lasers, 2012, 39(2): 0203002.

[8] 何祥明, 刘秀波, 杨茂盛, 等. 奥氏体不锈钢激光熔覆镍基复合涂层高温磨损行为[J]. 中国激光, 2011, 38(9): 0903007.

    He Xiangming, Liu Xiubo, Yang Maosheng, et al.. Elevated temperature tribological behaviors of laser cladding nickel-based composite coating on austenitic stainless steel[J]. Chinese J Lasers, 2011, 38(9): 0903007.

[9] 张现虎, 晁明举, 梁二军, 等. 激光熔覆原位生成TiC-zrC 颗粒增强镍基复合涂层[J]. 中国激光, 2009, 36(4): 998-1004.

    Zhang Xianhu, Chao Mingju, Liang Erjun, et al.. In-situ synthesis of TiC-ZrC particulate reinforced Ni-based composite coatings by cladding[J]. Chinese J Lasers, 2009, 36(4): 998-1004.

[10] 刘晓鹏, 张培磊, 卢云龙, 等. 纯铜表面激光熔覆Ni基硅化物涂层摩擦学性能研究[J]. 中国激光, 2015, 42(9): 0906005.

    Liu Xiaopeng, Zhang Peilei, Lu Yunlong, et al.. Study on tribological properties of Ni-based silicide coating on copper by laser cladding [J]. Chinese J Lasers, 2015, 42(9): 0906005.

[11] 李敏, 黄坚, 朱彦彦, 等. BN含量对激光熔覆TiB+TiN复合涂层显微组织和摩擦性能的影响[J]. 中国激光, 2015, 42(9): 0903001.

    Li Min, Huang Jian, Zhu Yanyan, et al.. Effect of BN content on microstructure evolution and wear property of in situ Ti /(TiB+TiN) hybrid composite coating by laser cladding[J]. Chinese J Lasers, 2015, 42(9): 0903001.

[12] Tang H B, Fang Y L, Wang H M. Microstructure and dry sliding wear resistance of a Cr13Ni5Si2 ternary metal silicide alloy[J]. Acta Materialia, 2004, 52(7): 1773-1783.

[13] Cruse T A, Newkirk J W. Evaluation of methods to produce tough Cr3Si based composites[J]. Materials Science and Engineering: A, 1997, 239-240: 410-418.

[14] 张立强, 王华明. Cr3Si/Cr13Ni5Si2金属间化合物合金组织与高温滑动磨损性能的研究[J]. 稀有金属材料与工程, 2004, 33(5): 512-514.

    Zhang Liqiang, Wang Huaming. Microstructure and high-temperature sliding wear resistance of a Cr3Si/Crl3Ni5Si2 intermetallic alloy [J]. Rare Metal Materials and Engineering, 2004, 33(5): 512-514.

[15] 余鹏程, 刘秀波, 陆小龙, 等. Ti6Al4V合金激光熔覆复合涂层的摩擦学和高温抗氧化性能研究[J]. 中国激光, 2015, 42(10): 1003004.

    Yu Pengcheng, Liu Xiubo, Lu Xiaolong, et al.. Study on tribology and high-temperature oxidation resistance of laser cladding composite coatings on Ti6Al4V alloy[J]. Chinese J Lasers, 2015, 42(10): 1003004.

[16] Wang H M, Duan G. Wear and corrosion behavior of laser clad Cr3Si reinforced intermetallic composite coatings[J]. Intermetallics, 2003, 11(8): 755-762.

[17] 菅丽娜, 张凌云, 于荣莉, 等. 钛合金表面激光熔敷Cr13Ni5Si2基金属硅化物涂层组织与耐磨性[J]. 稀有金属材料与工程, 2005, 34(6): 936-939.

    Jian Lina, Zhang Lingyun, Yu Rongli, et al.. Microstructure and wear resistance of laser clad Cr13Ni5Si2-based metal silicide coating on titanium alloy[J]. Rare Metal Materials and Engineering, 2005, 34(6): 936-939.

[18] 张维平, 路董华, 余娟娟, 等. 氧化锆增韧机制在激光熔覆技术中的应用[J]. 中国激光, 2014, 41(11): 1103008.

    Zhang Weiping, Lu Donghua, Yu Juanjuan, et al.. Application of zirconia toughening mechanism on laser cladding[J]. Chinese J Lasers, 2014, 41(11): 1103008.

[19] Yuan L, Wang H M. Corrosion behaviors of a γ-toughened Cr13Ni5Si2/Cr3Ni5Si2 multi-phase ternary metal silicide alloy in NaCl solution [J]. Electrochimica Acta, 2008, 54(2): 421-429.

[20] Gray J J, Orme C A. Electrochemical impedance spectroscopy study of the passive films of alloy 22 in low pH nitrate and chloride environments[J]. Electrochimica Acta, 2007, 52(7): 2370-2375.

[21] Kocijan A, Donik C , Jenko M. Electrochemical and XPS studies of the passive film formed on stainless steels in borate buffer and chloride solutions[J]. Corrosion Science, 2007, 49(5): 2083-2098.

[22] Wu Y, Wang A H, Zhang Z, et al.. Wear resistance of in situ synthesized titanium compound coatings produced by laser alloying technique [J]. Surface and Coatings Technology, 2014, 258: 711-715.