激光熔覆304不锈钢组织与力学性能研究
[1] 韩文静,张培训,汤其建,等.单体液压支柱缸体激光熔覆Ni60A+20% WC性能[J].煤炭学报,2012,37(2):340-343.
[2] 郭卫,菅含含,柴蓉霞,等.27SiMn钢表面激光熔覆的数值模拟与验证[J].热加工工艺, 2016,45(18):1-6.
[3] 解文正,李春强,杨志伟,等.激光熔覆技术在液压支架上的应用研究[J].煤矿机械,2010, 31(10):106-108.
[4] 杨庆东,苏伦昌,董春春,等.液压支架立柱27SiMn激光熔覆铁基合金涂层的性能[J].中国表面工程,2013,26(6):42-47.
[5] 柴蓉霞,李凯凯,郭卫,等.热处理工艺对304不锈钢熔覆层组织和性能的影响[J].激光与光电子学进展,2018,55(5):279-285.
[6] 李鹏.基于激光熔覆的三维金属零件激光直接制造技术研究[D].武汉:华中科技大学,2005.
[7] 张庆茂,刘喜明,孙宁,等.送粉式宽带激光熔覆——搭接基础理论的研究[J].金属热处理,2001(2):25-28.
[8] SHI X Z,MA S Y,LIU C M,et al.Selective laser melting-wire arc additive manufacturing hybrid fabrication of Ti-6Al-4V alloy:microstructure and mechanical properties[J].Materials Science and Engineering:A,2017(684):196-204.
[9] ZHU Y Z,WANG S Z,LI B L,et al.Grain growth and microstructure evolution based mechanical property predicted by a modified Hall-Petch equation in hot worked Ni76Cr19AlTiCo alloy[J].Materials & Design,2014,(55):456-462.
[10] JIA W,MA L,TANG Y,et al.Relationship between microstructure and properties during multi-pass, variable routes and different initial temperatures hot flat rolling of AZ31B magnesium alloy[J].Materials & Design,2016(103):171-182.
[11] MURR L E,ESQUIVEL E V,QUINONES S A,et al.Microstructures and mechanical properties of electron beam-rapid manufactured Ti-6Al-4V biomedical prototypes compared to wrought Ti-6Al-4V[J].Materials Characterization,2009,60(2):96-105.
郭卫, 张亚普, 胡磊, 李远凯. 激光熔覆304不锈钢组织与力学性能研究[J]. 应用激光, 2019, 39(2): 191. Guo Wei, Zhang Yapu, Hu Lei, Li Yuankai. Microstructure and Mechanical Properties of Laser Cladding 304 Stainless Steel[J]. APPLIED LASER, 2019, 39(2): 191.