[1] 卢建斌, 杨永强, 王迪 等. 选区激光熔化成型悬垂面质量的影响因素分析［J］. 激光技术, 2011, 35(2): 148～151

    Lu Jianbin, Yang Yongqiang, Wang Di et al.. Analysis of affecting factors of overhanging surface quality by selective laser melting［J］. Laser Technology, 2011, 35(2): 148～151

[2] 苏旭彬, 杨永强, 王迪 等. 免装配机构的选区激光熔化直接成型工艺研究［J］. 中国激光, 2011, 38(6): 0603021

    Su Xubin, Yang Yongqiang, Wang Di et al.. Study on process of non-assembly mechanisms directly fabricated by selective laser melting［J］. Chinese J. Lasers, 2011, 38(6): 0603021

[3] J. P. Kruth, P. Mercelis, V. Vaerenbergh et al.. Feed back control of selective laser melting［OL］.［2008-02-17］. https://lirias.kuleuven.be/bitstream/123456789/185342/1 /krufcs.pdf

[4] M. S. Ali, Z. H. Hou, M. N. Noori. Stability and performance of feedback control systems with time delays［J］. Computers and Structures, 1998, 66(2-3): 241～248

[5] 吴伟辉, 杨永强, 王迪. 选区激光熔化成型过程的球化现象［J］. 华南理工大学学报(自然科学版), 2010, 38(5): 110～115

    Wu Weihui, Yang Yongqiang, Wang Di . Balling phenomenon in selective laser melting process［J］. Journal of South China University of Technology (Natural Science Edition), 2010, 38(5): 110～115

[6] 赵吉宾, 何利英, 刘伟军 等. 快速成型制造中零件制作方向的优化方法［J］. 计算机辅助设计与图形学学报, 2006, 18(3): 456～463

    Zhao Jibin, He Liying, Liu Weijun et al.. Optimization of part-building orientation for rapid prototyping manufacturing［J］. Journal of Computer-Aided Design & Computer Graphics, 2006, 18(3): 456～463

[7] 洪军, 武殿梁, 李涤尘 等. 光固化快速成型中零件制作方向的多目标优化问题研究［J］. 西安交通大学学报, 2001, 35(5): 506～509

    Hong Jun, Wu Dianliang, Li Dichen et al.. Multi-objective optimization of the part building orientation in stereolithography［J］. Journal of Xi′an Jiaotong University, 2001, 35(5): 506～509

[8] 刘厚才, 储爱民. 三维打印快速成型零件制作方向的优化研究［J］. 工程图学学报, 2009, (3): 41～45

    Liu Houcai, Chu Aimin. Part building orientation optimization in rapid prototyping of three dimensional printing［J］. Journal of Engineering Graphics, 2009, (3): 41～45

[9] A. Simchi. Direct laser sintering of metal powders: Mechanism, kinetics and microstructural features［J］. Materials Science & Engineering, 2006, 428(1-2): 148～158

[10] E. Yasa, T. Craeghs, M. Badrossamay et al.. Rapid manufacturing research at the Catholic University of Leuven［OL］.［2009-07-04］. http://iweb.tntech.edu/rrpl/rapidtech2009/yasa.pdf

[11] 孙家广, 杨长贵. 计算机图形学: 新版［M］. 北京: 清华大学出版社, 1995. 344～348

    Sun Jiaguang, Yang Changgui.Computer Graphics: The New Version［M］. Beijing: Tsinghua University Press, 1995. 344～348

[12] 王小平, 曹立明. 遗传算法——理论, 应用与软件实现［M］. 西安: 西安交通大学出版社, 2002. 25～28

    Wang Xiaoping, Cao Liming. Genetic Algorithm——Theory, Application and Software［M］. Xi′an: Xi′an Jiaotong University Press, 2002. 25～28