选区激光熔化成型悬垂结构的计算机辅助工艺参数优化

刘杰; 杨永强; 王迪; 肖冬明; 苏旭彬

doi:doi:10.3788/cjl201239.0503001

中国激光, 2012, 39 (5): 0503001, 网络出版: 2012-04-13

选区激光熔化成型悬垂结构的计算机辅助工艺参数优化

Computer-Aided Optimization of the Process Parameters for Fabricating Overhanging Structure by Selective Laser Melting

论文大纲

刘杰 ^*杨永强王迪肖冬明苏旭彬

作者单位

华南理工大学机械与汽车工程学院，广东广州 510640

摘要

为了提高选区激光熔化(SLM)成型悬垂结构的质量，从调节成型方向和能量输入入手研究悬垂结构的计算机辅助工艺参数优化。以减小零件模型整体难成型悬垂面的面积为目标，以零件模型非成型方向的两个旋转角度为优化变量，建立成型方向的优化模型，并基于遗传算法实现优化模型参数的求解。通过遍历零件模型中的所有三角面片，建立倾斜角静态查找表，并在成型时查表实现能量输入的实时调节。实验结果表明，经成型方向优化，零件模型难成型悬垂面的面积从555.12 mm2减小为16.211 mm2，所需支撑数量明显减少；成型后所得零件无明显悬垂物和翘曲变形，成型质量明显改善。

Abstract

To improve the fabricating quality of overhanging structure in selective laser melting (SLM), the computer-aided optimization of process parameters is studied, which focuses on the fabrication orientation and the power input. The optimization model of the fabrication orientation, which is aiming at reducing the difficultly fabricating overhanging surface area, is proposed. The genetic solution for the model is studied. The static lookup table to adjust the energy input duly is built by traversing all the triangles in the stereo lithography (STL) file. The experimental results show that the difficultly fabricating overhanging surface area reduces from 555.12 mm2 to 16.211 mm2 after the optimization of the fabrication orientation, which leads to the less support needs, and the fabrication quality is obviously improved without so much overhang and deformation.

参考文献

[1] 卢建斌, 杨永强, 王迪等. 选区激光熔化成型悬垂面质量的影响因素分析［J］. 激光技术, 2011, 35(2): 148～151

Lu Jianbin, Yang Yongqiang, Wang Di et al.. Analysis of affecting factors of overhanging surface quality by selective laser melting［J］. Laser Technology, 2011, 35(2): 148～151

[2] 苏旭彬, 杨永强, 王迪等. 免装配机构的选区激光熔化直接成型工艺研究［J］. 中国激光, 2011, 38(6): 0603021

Su Xubin, Yang Yongqiang, Wang Di et al.. Study on process of non-assembly mechanisms directly fabricated by selective laser melting［J］. Chinese J. Lasers, 2011, 38(6): 0603021

[3] J. P. Kruth, P. Mercelis, V. Vaerenbergh et al.. Feed back control of selective laser melting［OL］.［2008-02-17］. https://lirias.kuleuven.be/bitstream/123456789/185342/1 /krufcs.pdf

[4] M. S. Ali, Z. H. Hou, M. N. Noori. Stability and performance of feedback control systems with time delays［J］. Computers and Structures, 1998, 66(2-3): 241～248

[5] 吴伟辉, 杨永强, 王迪. 选区激光熔化成型过程的球化现象［J］. 华南理工大学学报(自然科学版), 2010, 38(5): 110～115

Wu Weihui, Yang Yongqiang, Wang Di . Balling phenomenon in selective laser melting process［J］. Journal of South China University of Technology (Natural Science Edition), 2010, 38(5): 110～115

[6] 赵吉宾, 何利英, 刘伟军等. 快速成型制造中零件制作方向的优化方法［J］. 计算机辅助设计与图形学学报, 2006, 18(3): 456～463

Zhao Jibin, He Liying, Liu Weijun et al.. Optimization of part-building orientation for rapid prototyping manufacturing［J］. Journal of Computer-Aided Design & Computer Graphics, 2006, 18(3): 456～463

[7] 洪军, 武殿梁, 李涤尘等. 光固化快速成型中零件制作方向的多目标优化问题研究［J］. 西安交通大学学报, 2001, 35(5): 506～509

Hong Jun, Wu Dianliang, Li Dichen et al.. Multi-objective optimization of the part building orientation in stereolithography［J］. Journal of Xi′an Jiaotong University, 2001, 35(5): 506～509

[8] 刘厚才, 储爱民. 三维打印快速成型零件制作方向的优化研究［J］. 工程图学学报, 2009, (3): 41～45

Liu Houcai, Chu Aimin. Part building orientation optimization in rapid prototyping of three dimensional printing［J］. Journal of Engineering Graphics, 2009, (3): 41～45

[9] A. Simchi. Direct laser sintering of metal powders: Mechanism, kinetics and microstructural features［J］. Materials Science & Engineering, 2006, 428(1-2): 148～158

[10] E. Yasa, T. Craeghs, M. Badrossamay et al.. Rapid manufacturing research at the Catholic University of Leuven［OL］.［2009-07-04］. http://iweb.tntech.edu/rrpl/rapidtech2009/yasa.pdf

[11] 孙家广, 杨长贵. 计算机图形学: 新版［M］. 北京: 清华大学出版社, 1995. 344～348

Sun Jiaguang, Yang Changgui.Computer Graphics: The New Version［M］. Beijing: Tsinghua University Press, 1995. 344～348

[12] 王小平, 曹立明. 遗传算法——理论, 应用与软件实现［M］. 西安: 西安交通大学出版社, 2002. 25～28

Wang Xiaoping, Cao Liming. Genetic Algorithm——Theory, Application and Software［M］. Xi′an: Xi′an Jiaotong University Press, 2002. 25～28

刘杰, 杨永强, 王迪, 肖冬明, 苏旭彬. 选区激光熔化成型悬垂结构的计算机辅助工艺参数优化[J]. 中国激光, 2012, 39(5): 0503001. Liu Jie, Yang Yongqiang, Wang Di, Xiao Dongming, Su Xubin. Computer-Aided Optimization of the Process Parameters for Fabricating Overhanging Structure by Selective Laser Melting[J]. Chinese Journal of Lasers, 2012, 39(5): 0503001.

选区激光熔化成型悬垂结构的计算机辅助工艺参数优化

关于本站 Cookie 的使用提示

全站搜索

选区激光熔化成型悬垂结构的计算机辅助工艺参数优化

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索