UV-LED固化对光纤性能的影响

光纤制造成本的差异性受技术工艺的影响越来越小,所以通过设备改造升级,使用新型的紫外固化方式,成为降低光纤生产成本的一个重要途径。主要从紫外发光二极管(UV-LED)固化的特点、固化度、附着力方面与传统固化方式进行了分析对比,阐述了UV-LED固化方式的优势。通过使用UV-LED固化方式,固化系统的故障停机时间降低了92%,故障率降低了87%,生产能耗降低了90%,并且光纤的固化度、附着力也得到保证。因此,UV-LED固化方式是目前光纤生产降低成本、提高生产效率最有效的方式之一。

Abstract

The impact of fiber manufacturing cost by technology is more and more small, under this premise, transformation and upgrading of the equipment and using of the new UV curing method is an important way to reduce the costing. In this paper, the characteristics, curing degree and adhesion of UV-LED curing are compared with the traditional curing method. The advantage of UV-LED curing methods is described. By using the UV-LED curing method, the failure time of the curing system is reduced by 92%, the failure rate is reduced by 87%, the production energy consumption is reduced by 90% , while the curing degree and adhesion of the optical fiber are guaranteed. Therefore, UV-LED curing is one of the most effective ways to reduce the cost and improve the production efficiency.

参考文献

[1] 张良, 贺作为, 宋君, 等. 退火工艺对光纤性能的影响［J］. 光学与光电技术, 2016, 14(1): 47-50.

ZHANG Liang, HE Zuo-wei, SONG Jun, et al. Influence of annealing process on the properties of optical fiber［J］. Optics & Optoelectronic Technology, 2016, 14(1): 47-50.

[2] 张功会, 郝昌平, 陈伟, 等. 大尺寸超长光纤预制棒的生产技术研究［J］. 光学与光电技术, 2015, 13(5): 19-22.

ZHANG Gong-hui, HAO Chang-ping, CHEN Wei, et al. Study on the production technology of large size and super long optical fiber preform［J］. Optics & Optoelectronic Technology, 2015, 13(5): 19-22.

[3] 欧乐军. 紫外光固化涂料的应用概况［J］. 广州化工, 2011, 39(16): 44-45.

OU Le-jun. Application of UV curing coatings［J］. Guangzhou Chemical Industry, 2011, 39(16): 44-45.

[4] 张蕾. UV-LED固化技术发展趋势［J］. 电子元件与材料, 2015, (6): 99-100.

ZHANG Lei. Development trend of UV-LED curing technology［J］. Electronic Components and Materials, 2015, (6): 99-100.

[5] 李铁宏. UV LED固化新机遇［J］. 印刷杂志, 2014, (11): 56-57.

LI Tei-hong. New opportunities for curing UV LED［J］. Printing Field, 2014, (11): 56-57.

[6] Cunha L G, Alonso R C, Neves A C, et al. Degree of conversion and contraction stress development of a resin composite irradiated using halogen and LED at two C-factor levels［J］. Operative Dentistry, 2009, 34(1): 24-31.

[7] Calheiros F C, Stansbury K J W, Braga R R. Influence of radiant exposure on contraction stress, degree of conversion and mechanical properties of resin composites［J］. Dental Materials, 2006, 22(9): 799-803.

[8] 马建高, 李晓俊, 王燕, 等. 一种采用UV-LED灯固化的光纤制造工艺和新型光纤涂料设计［J］. 网络电信, 2015, (2): 42-48.

MA Jian-gao, LI Xiao-jun, WANG Yan, et al. An optical fiber fabrication process using UV-LED lamp and a new type of optical fiber coating design［J］. Network telecom, 2015, (2): 42-48.

[9] 陈志特. UV LED固化技术应用探析［J］. 科技风, 2013, (24): 98-98.

CHEN Zhi-te. Application analysis of UV LED curing technology［J］. Technology Wind, 2013, (24): 98-98.

[10] 闫庆金. 光引发剂在UV LED固化技术中的应用［C］. 中国辐射固化年会, 2012.

YAN Qing-jin. Application of photoinitiator in UV LED curing technology［C］. China Annual Meeting for Radiation Curing, 2012.

[11] 江棂, 谢同凤, 徐炳财, 等. UV固化涂料与石英光纤的附着力及对传输损耗的影响［J］. 安徽理工大学学报: 自然科学版, 1991, (3): 78-84.

JIANG Ling, XIE Tong-feng, XU Bing-cai, et al. Adhesion of UV curable coatings and quartz fiber and its effect on transmission loss［J］. Journal of Anhui University of Science and Technology (Natural Science), 1991, (3): 78-84.

郝昌平, 曹少波, 张功会, 宋海瑞, 陈伟, 张良, 李亚东. UV-LED固化对光纤性能的影响[J]. 光学与光电技术, 2017, 15(3): 53. HAO Chang-ping, CAO Shao-bo, ZHANG Gong-hui, SONG Hai-rui, CHEN Wei, ZHANG Liang, LI Ya-dong. Effect on Optical Fiber Properties of UV-LED Curing[J]. OPTICS & OPTOELECTRONIC TECHNOLOGY, 2017, 15(3): 53.

UV-LED固化对光纤性能的影响

关于本站 Cookie 的使用提示

全站搜索

UV-LED固化对光纤性能的影响

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索