选区激光熔化及热处理工艺对钴铬合金力学性能的影响
许建波, 张庆茂, 姚锡禹, 郭亮, 马文有. 选区激光熔化及热处理工艺对钴铬合金力学性能的影响[J]. 强激光与粒子束, 2017, 29(11): 119001.
Xu Jianbo, Zhang Qingmao, Yao Xiyu, Guo Liang, Ma Wenyou. Process and effects of heat treatment on mechanical properties of Co-Cr alloy manufactured by selective laser melting[J]. High Power Laser and Particle Beams, 2017, 29(11): 119001.
[1] Harris I D. Additive manufacturing: A transformational advanced manufacturing technology[J]. Adv Mat Proc, 2012, 170(5):25-29.
[2] Mumtaz K A, Erasenthiran P, Hopkinson N. High density selective laser melting of Waspaloy[J]. J Mat Proc Tech, 2008, 195:77-83.
[3] Stamp R, FoxP, O’Neill W, et al. The development of a scanning strategy for the manufacture of porous biomaterials by selective laser melting[J]. J Mat Sci Mat Med, 2009, 20:1839-1848.
[4] 许建波,张庆茂,郭亮,等.口腔修复中选区激光熔化工艺及性能研究[J].应用激光, 2017, 37(1):26-34.(Xu Jianbo, Zhang Qingmao, Guo Liang, et al. The study of technology and properties of selective laser melting in prosthodontics. Appl Laser, 2017, 37(1):26-34)
[5] Gu D, Shen Y, Meng G. Growth morphologies and mechanisms of TiC grains during selective laser melting of Ti-Al-C composite powde[J]. Materials Letters, 2009, 63:2536-2538.
[6] Buchbinder D, Schleifenbaum H, Heidrich S, et al. High power selective laser melting (HP SLM) of aluminum parts[J]. Physics Procedia, 2011, 12:271-278.
[7] Liao Y, Hoffman E, Wimmer M A, et al. CoCrMo metal-on-metal hip replacements[J]. Phys Chem Phys, 2013, 15(3):746-756.
[8] 麦淑珍.个性化CoCr合金牙冠固定桥激光选取熔化制造工艺及性能研究[D].广州:华南理工大学, 2016:1-10.(Mai Shuzhen. Study on the forming processes and properties of customized CoCr alloy crowns and fixed bridges manufactured by selective laser melting. Guangzhou: South China University of Technology, 2016:1-10)
[9] Huang P. Athermal ε-martensite in a Co-Cr-Mo alloy grain size effects[J]. Mater Lett, 1999, 39:245-253.
[10] Koizumi Y, Suzuki S, Yamanaka K. Strain-induced martensitic transformation near twin boundaries in a biomedical Co-Cr-Mo alloy with negative stacking fault energy[J]. Acta Materialia, 2013, 61(5):1648-1661.
[11] Yamanaka K, Mori M, Chiba A. Assessment of precipitation behaviour in dental castings of a Co-Cr-Mo alloy[J]. J Mech Behav Biomed Mat, 2015, 50:268-276.
[12] Lu Y J, Wu S Q, Gan Y L, et al. Microstructure, mechanical property and metal release of As-SLM CoCrW alloy under different solution treatment conditions[J]. J Mech Behav Biomed, 2015, 55:179-190.
[13] Bassoli E, Gatto A, Iuliano L. Joining mechanisms and machanical properties of PA composites obtained by selective laser sintering[J]. Rapid Prot J, 2012, 18(2):100-108.
[14] Lu Y, Wu S, Gan Y, et al. Investigation on the microstructure, mechanical property and corrosion behavior of the selective laser melted CoCrW alloy for dental application[J]. Mater Sci Eng, 2015, 49:517-525.
[15] 赵进炎,张志方,李东方,等.选区激光熔化钴铬合金的性能研究[J].中国激光, 2015, 42:1103006.(Zhao Jinyan, Zhang Zhifang, Li Dongfang, et al. Properties study of CoCr alloy fabricated by selective laser melting. Chinese Journal of Laser, 2015, 42:1103006)
[16] Herrera M, Espinoza A, Mendez J, et al. Effect of C content on the mechanical properties of solution treated as-cast ASTM F75 alloys[J]. J Mater Sci Mater Med, 2005, 16:607-611.
[17] Giacchi J V, Fornaro O, Palacio H. Microstructural evolution during solution treatment of Co-Cr-Mo-C biocompatible alloys [J]. Materials Characterization, 2012, 68:49-57.
[18] 王迪.选区激光熔化成型不锈钢零件特征与工艺研究[D].广州:华南理工大学, 2011:20-90.(Wang Di. Research on process and characteristics of stainless steel parts manufactured by selective laser melting. Gangzhou: South China University of Technology, 2011:20-90)
[19] Morgan R H, Papworth A J, Sutcliffe C. High density net shape components by direct laser re-melting of single-phase powders[J]. Journal of Materials Science, 2002, 37(15):3093-3100.
[20] Barucca G, Santecchia E, Majni G, et al. Structural characterization of biomedical Co-Cr-Mo components produced by direct metal laser sintering[J]. Mat Sci Eng C, 2015, 48:263-269.
[21] Guan K, Wang Z, Gao M, et al. Effect of processing parameters on tensile properties of selective laser melted 304 stainless steel[J]. Materials and Design, 2013, 50:581-586.
许建波, 张庆茂, 姚锡禹, 郭亮, 马文有. 选区激光熔化及热处理工艺对钴铬合金力学性能的影响[J]. 强激光与粒子束, 2017, 29(11): 119001. Xu Jianbo, Zhang Qingmao, Yao Xiyu, Guo Liang, Ma Wenyou. Process and effects of heat treatment on mechanical properties of Co-Cr alloy manufactured by selective laser melting[J]. High Power Laser and Particle Beams, 2017, 29(11): 119001.