[1] Chibana T, Nakano H, Hata H, et al. Development status of a 193-nm immersion exposure tool[C]//Proc of SPIE. 2006: 61541V.

[2] Bijkerk F, Louis E, Wiel M, et al. Performance optimization of a high-repetition-rate KrF laser plasma X-ray source for microlithography[J]. J X-Ray Sci Technol, 1992, 30:133-151.

[3] 赵永蓬,徐强,李琦,等.等离子体尺寸对放电极紫外光源影响[J].强激光与粒子束, 2013,25(10):2631-2635.(Zhao Yongpeng, Xu Qiang, Li Qi, et al. Influence of plasma size on discharge extreme ultraviolet source. High Power Laser and Particle Beams, 2013, 25(10):2631-2635)

[4] Tao Y, Tillack M S, Yuspeh S, et al. Interaction of a laser pulse with tin-based plasma for an extreme ultraviolet lithography source[J]. IEEE Trans on Plasma Science, 2010, 38(4): 714-718.

[5] Bajt S, Alameda J B, Barbee J T W, et al. Improved reflectance and stability of Mo/Si multilayers[C]//International Symposium on Optical Science and Technology. International Society for Optics and Photonics, 2001: 65-75.

[6] Fomenkov I V, Brandt D C, Bykanov A N, et al. Laser-produced plasma light source for EUVL[C]//Proc of SPIE. 2009: 727138.

[7] Mizoguchi H, Abe T, Watanabe Y, et al. First generation laser-produced plasma source system for HVM EUV lithography[C]//Proc of SPIE. 2010: 763608.

[8] Cunado J A. Control and stabilization of laser plasma sources for EUV lithography[D]. Florida: University of Central Florida Orlando, 2007.

[9] Rollinger B, Morris O, Abhari R S. Stable tin droplets for LPP EUV sources[C]//Proc of SPIE. 2011: 79692W.

[10] Rollinger B, Bozinova L, Gambino N, et al. Tin droplets for LPP EUV sources[C]//Proc of SPIE. 2012: 83222P.

[11] Strutt J W, Rayleigh L. On the instability of jets[J]. Proc London Math Soc, 1878, 10: 4-13.

[12] Fomenkov I V, Brandt D C, Farrar N R, et al. Laser produced plasma EUV light source for EUVL patterning at 20 nm node and beyond[C]//Proc of SPIE. 2013: 86792I.