Author Affiliations
Abstract
1 Shandong Inspur Artificial Intelligence Research Institute Company Limited, Jinan 250013, China
2 MIIT Key Laboratory of Photonics Information Technology, School of Optics and Photonics, Beijing Institute of Technology, Beijing 100081, China
Active metasurfaces have recently attracted more attention since they can make the light manipulation be versatile and real-time. Metasurfaces-based holography possesses the advantages of high spatial resolution and enormous information capacity for applications in optical displays and encryption. In this work, a tunable polarization multiplexing holographic metasurface controlled by an external magnetic field is proposed. The elaborately designed nanoantennas are arranged on the magneto-optical intermediate layer, which is placed on the metallic reflecting layer. Since the non-diagonal elements of the dielectric tensor of the magneto-optical material become non-zero values once the external magnetic field is applied, the differential absorption for the left and right circularly polarized light can be generated. Meanwhile, the amplitude and phase can be flexibly modulated by changing the sizes of the nanoantennas. Based on this, the dynamic multichannel holographic display of metasurface in the linear and circular polarization channels is realized via magnetic control, and it can provide enhanced security for optical information storage. This work paves the way for the realization of magnetically controllable phase modulation, which is promising in dynamic wavefront control and optical information encryption.
active metasurface magneto-optical effect polarization multiplexing holography dynamic holographic display 
Chinese Optics Letters
2024, 22(4): 043601
Author Affiliations
Abstract
1 School of Optoelectronics, Beijing Institute of Technology, Beijing 100081, China
2 Key Laboratory of Cluster Science of Ministry of Education, School of Chemistry and Chemical Engineering, Beijing Institute of Technology, Beijing 100081, China
3 Fujian Provincial Key Laboratory of Photonics Technology, College of Photonic and Electronic Engineering, Fujian Normal University, Fuzhou 350007, China
Novel composite materials are synthesized by incorporating N-acryloylmorpholine (ACMO) in highly concentrated phenanthrenequinone (PQ) doped poly(methyl methacrylate) (PMMA). The photosensitizer concentration of PQ was increased from 0.7 wt. % to 1.8 wt. %. The doping of ACMO component results in a higher diffraction efficiency and photosensitivity than a typical PQ/PMMA system. The enhanced performance of the material may stem from the ACMO molecules, which might open a new route for improving the holographic performance of the PQ/PMMA photopolymer.
090.2900 Optical storage materials 160.5470 Polymers 
Chinese Optics Letters
2018, 16(11): 110901
作者单位
摘要
1 北京理工大学 光电学院 信息光学研究室,北京 100081
2 日本东京大学 生产技术研究所,东京 153-8505
全息是目前一项极具前景的科学技术,即通过信号光和参考光的干涉,在小小的全息图上记录丰富的信息。相比于传统全息仅记录光波的相位、振幅信息,偏光全息可以将额外的偏振信息记录于偏振态敏感材料中。本文从偏光全息材料入手,详细介绍了偏光全息生产过程;同时介绍基于琼斯理论和张量理论的偏光全息原理和研究进展;最后描述了偏光全息在全息存储和纳米光学领域的发展前景。
偏光全息 琼斯理论 张量理论 偏振态 polarization holography Jones theory tensor theory polarization states 
中国光学
2017, 10(5): 588
作者单位
摘要
北京理工大学 光电学院, 北京 100081
对于体全息来说, 存储材料的体积与所能存储的信息容量有关。采用热致聚合方法制备了厚度分别为0.5mm、1.0mm、1.5mm、2.0mm的菲醌掺杂的聚甲基丙烯酸甲酯(PQ/PMMA)光致聚合物材料。探测并分析了材料样品对不同波长的光吸收特性以及不同厚度材料的全息性能。实验结果表明, 厚度的变化对材料的光致双折射值影响较小, 而对衍射效率的影响较大。
菲醌掺杂的聚甲基丙烯酸甲酯 光致聚合物 光致双折射 衍射效率 phenanthrenequinone-doped-PMMA photopolymer photoinduced birefringence diffraction efficiency 
光学技术
2017, 43(2): 126
作者单位
摘要
北京理工大学 光电学院 北京市混合现实与新型显示工程技术研究中心, 北京 100081
为了解决多投影机拼接融合显示系统中亮度分布不均匀及不同视角下的亮度差异问题, 提出了一种多视角投影-摄像机系统的非线性最优化颜色校正方法, 通过在多个位置放置摄像机进行多角度的观察, 并对所有观察结果进行统一的优化处理, 实现在各个方向上都能够满足要求的亮度调整方案。针对重叠区域高亮现象及重叠方向和形状的任意性问题, 采用双三角函数法计算得到投影机的衰减矩阵, 实现亮度融合。以双通道投影系统为实验平台验证了算法的可行性和有效性。
多视角投影-相机系统 非线性响应曲线 颜色校正 多视角非线性最优化算法 multi-view projector-camera system nonlinear response curve color correction multi-view nonlinear optimization algorithm 
光学技术
2015, 41(5): 408
作者单位
摘要
清华大学 精密测试技术与仪器国家重点实验室,北京 100084
在设计自由曲面光学元件零补偿检测的计算全息图(CGH)时,利用光线追迹可得到散乱分布的离散相位点,需通过插值得到连续的相位分布函数,以计算CGH刻线位置。采用双三次B样条插值法,对散乱分布的离散相位点进行拟合并用较少的采样点满足精度要求。利用双三次B样条的矩阵表达式及CGH加工相位函数在所加载频方向单调递增的性质,简化了求解插值曲面与x-y平行平面精确交线的方法,高精度地求取了相位型CGH的上下沿刻线位置。最后给出了一例用于自由曲面干涉零补偿检测的CGH图样。
光学设计 计算全息 双三次B样条插值 零补偿检测 自由曲面 
光学学报
2010, 30(6): 1767
作者单位
摘要
1 清华大学 精密仪器分机械学系,北京 100083
2 北京理工大学 光电学院,北京 100081
3 北京航空精密机械研究所 精密制造技术航空科技重点实验室,北京 100076
在非球面检测中,为了消除衍射光学补偿器的位置偏差.在补偿器的外围设计、制作了位相型反射式菲涅耳波带板作为衍射光学校准器.利用微细加工手段,将补偿器和校准器整体集成在同一片基上.通过位相型反射式菲涅耳波带板的自校准功能,使其衍射光波与参考光波干涉,形成校准干涉条纹.测量时,调节校准干涉条纹成为最简单的形式,即可校正补偿器的离焦、偏心和倾斜误差,实现位置的精确校准.实验中,得到了近似零校准干涉条纹,有效地消除了补偿器的装调误差对测量的影响.
非球面检测 衍射光学元件 菲涅耳波带板 Asphere test Diffractive optics Fresnel zone plate 
光子学报
2009, 38(6): 1473
Author Affiliations
Abstract
State Key Laboratory of Precision Measurement Technology and Instruments, Tsinghua University, Beijing 100084, China
Freeform surfaces are increasingly used in the design of compact optical systems. Interferometric null test with computer generated hologram (CGH), which has been successfully used in highly accurate test of aspheric surfaces, is adopted to test the freeform surfaces. The best fitting sphere of the freeform surface under the test is firstly calculated to quickly estimate the possibility of null test. To decrease the maximum spatial frequency of the null CGH, the position of the CGH and the direction of optical axis are optimized. The estimated maximum spatial frequency of the CGH is 7.8% apart from the optimized one, which shows the validity of the best fitting sphere.
计算全息图 自由曲面 零补偿检测 最佳拟合球面 090.1760 Computer holography 120.6650 Surface measurements, figure 220.4840 Testing 
Chinese Optics Letters
2009, 7(12): 1097
作者单位
摘要
1 北京理工大学 信息科学技术学院光电工程系,北京 100081
2 北京航空精密机械研究所 精密制造技术航空科技重点实验室,北京 100076
介绍了用于非球面检测计算全息(Computer-generated hologram,CGH)的设计方法和步骤,对CGH位相分布求取、载频选取、CGH与干涉仪配合校准所涉及的关键问题展开了讨论,提出了一些全新的设计理念和方法。从理论上定量分析了CGH片基面型误差、全息图样偏差、刻蚀深度不均匀性和线宽不均匀性对再现波面的影响,得出了相应的误差公式指导计算全息元件加工环节的公差分配。给出了一个设计实例,检测不确定度达到λ/20。
计算全息 二元光学元件 菲涅尔波带板 非球面反射镜 CGH binary optics FZP aspheric mirror 
光学技术
2007, 33(5): 0654
作者单位
摘要
北京理工大学 信息科学技术学院光电工程系,北京 100081
用于非球面光学元件检测的计算全息图的设计与制作精度对实现非球面的高精度检测是至关重要的。为了提高计算全息图的设计精度,采用Householder变换把矛盾方程组的系数矩阵正交三角化,直接求解波面拟合系数,避免了法方程组的构造。全息图的设计是直接利用MATLAB的内部函数编程来实现的。对具有旋转对称性和非旋转对称性的物波进行了波面拟合,并设计了相应的计算全息图。结果表明,物波函数的拟合精度和全息图的绘制精度均有明显的提高,且计算速度快。
计算全息图(CGH) 波面拟合 Householder变换 CGH wave-front fitting Householder transformation MATLAB MATLAB 
光学技术
2007, 33(4): 0491

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!