[1] 李朋飞, 孙文磊, 黄勇, 等. 激光多道搭接激光熔覆技术研究现状［J］. 热加工工艺, 2016, 45(24): 7-10.

    Li P F, Sun W L, Huang Y, et al. Research status of multi-track overlapping laser cladding technology［J］. Hot Working Technology, 2016, 45(24): 7-10.

[2] 王东生, 田宗军, 沈理达, 等. 激光熔覆技术研究现状及其发展［J］. 应用激光, 2012, 32(6): 538-544.

    Wang D S, Tian Z J, Sheng L D, et al. Research status and development of laser cladding technology［J］. Applied Laser, 2012, 32(6): 538-544.

[3] 王鑫龙, 孙文磊, 张建杰, 等. 基于逆向工程的激光熔覆再制造路径规划［J］. 激光与光电子学进展, 2017, 54(5): 051401.

    Wang X L, Sun W L, Zhang J J, et al. Path planning of laser cladding and remanufacturing based on reverse engineering［J］. Laser & Optoelectronics Progress, 2017, 54(5): 051401.

[4] 黄勇, 孙文磊, 陈影. 激光熔覆再制造复杂轴类零件的轨迹规划［J］. 红外与激光工程, 2017, 46(5): 53-59.

    Huang Y, Sun W L, Chen Y. Trajectory planning of laser cladding remanufacturing for complex shaft shaped part［J］. Infrared and Laser Engineering, 2017, 46(5): 53-59.

[5] 陈影, 孙文磊, 黄勇, 等. 曲面零件的激光熔覆路径规划［J］. 激光与光电子学进展, 2016, 53(6): 061405.

    Chen Y, Sun W L, Huang Y, et al. Robot path planning of laser cladding and remanufacturing of curved surface parts［J］. Laser & Optoelectronics Progress, 2016, 53(6): 061405.

[6] 陈影, 孙文磊, 黄勇, 等. 激光熔覆曲面零件再制造的机器人路径规划［J］. 中国激光, 2017, 44(5): 0502001.

    Chen Y, Sun W L, Huang Y, et al. Robot path planning of laser cladding and remanufacturing of curved surface parts［J］. Chinese Journal of Lasers, 2017, 44(5): 0502001.

[7] 黄海博, 孙文磊, 黄勇, 等. 自由曲面熔覆路径的点云切片算法研究［J］. 激光技术, 2017, 41(5): 718-722.

    Huang H B, Sun W L, Huang Y, et al. Research of point cloud slicing algorithm for free-form surface laser cladding trajectory［J］. Laser Technology, 2017, 41(5): 718-722.

[8] 杨振玲, 杜娟, 闫献国, 等. 弓高误差变步长的插补点求取方法优化［J］. 工具技术, 2016, 50(8): 42-46.

    Yang Z L, Du J, Yan X G, et al. Improved interpolation algorithm of variable forward step with constant chord error of determining interpolation points［J］. Tool Engineering, 2016, 50(8): 42-46.

[9] 舒海生, 余豪华, 张书宇. 基于切片技术的曲面特征识别研究［J］. 制造技术与机床, 2012(12): 148-151.

    Shu H S, Yu H H, Zhang S Y. Research on surface feature recognition based on slicing technique［J］. Manufacturing Technology & Machine Tool, 2012(12): 148-151.

[10] 董佳琦, 张平. 基于曲面分片的五轴刀具轨迹规划［J］. 机床与液压, 2013, 41(15): 50-53.

    Dong J Q, Zhang P. Tool path planning for five-axis tool based on surface subdivision［J］. Machine Tool & Hydraulics, 2013, 41(15): 50-53.

[11] 林洁琼, 王义强. 复杂自由曲面的分片规划［J］. 吉林大学学报(工学版), 2007(2): 386-390.

    Lin J Q, Wang Y Q. Subdivision planning of complex free-form surface［J］. Journal of Jilin University (Engineering and Technology Edition), 2007(2): 386-390.

[12] 姜家高. 应用于焊接机器人的变位机控制研究［D］. 沈阳: 沈阳大学, 2015.

    Jiang J G. Applied to the welding robot displacement machine control research［D］. Shenyang: Shenyang University, 2015.

[13] 陶凤荣. 弧焊机器人与变位机的协调运动研究［D］. 柳州: 广西科技大学, 2015.

    Tang F R. Research on coordinated motion of arc welding robot andpositioner［D］. Liuzhou: Guangxi University of Science, 2015.

[14] 刘鹏, 宋涛, 贠超, 等. 焊接机器人运动学分析及轨迹规划研究［J］. 机电工程, 2013, 30(4): 390-394.

    Liu P, Song T, Yun C, et al. Study of kinematics analysis and trajectory planning for welding robot［J］. Journal of Mechanical & Electrical Engineering, 2013, 30(4): 390-394.

[15] 唐艳华, 赵永生. 变位机用转盘轴承的谐响应分析［J］. 机械设计与制造, 2013(7): 175-177, 181.

    Tang Y H, Zhao Y S. Harmonic response analysis for the positioner used slewing bearings［J］. Machinery Design & Manufacture, 2013(7): 175-177, 181.

[16] 王玮, 巴音贺希格, 潘明忠, 等. 扫描干涉场曝光系统中光束对准误差及其控制［J］. 光学学报, 2017, 37(7): 0722003.

    Wang W, Bayanheshig, Pan M Z, et al. Beam alignment error and its control in scanning beam interference lithography system［J］. Acta Optica Sinica, 2017, 37(7): 0722003.