电光与控制, 2017, 24 (2): 89, 网络出版: 2017-02-23  

轮式无人机地面滑跑模型的建立

Establishment of Taxiing Model for a Wheeled UAV
作者单位
南京航空航天大学自动化学院, 南京 211100
摘要
无人机地面滑跑模型的建立是起飞、着陆阶段地面滑跑控制律设计及实时系统仿真开发的基础。建立某轮式无人机的起落架模型和轮胎模型,将无人机质量分为弹性支撑质量和非弹性支撑质量两部分,在无人机滑跑时,对两部分进行动力学分析,建立无人机的地面滑跑模型,并对无人机地面滑跑模型进行加速和减速滑跑的仿真测试,最终的仿真结果表明模型正确。
Abstract
The establishment of taxiing model for the Unmanned Aerial Vehicle (UAV) is the basis for control law design and real-time simulation system development of the UAV's taxiing in take-off and landing.We established the landing gear model and tire model of a wheeled UAV.The quality of UAV was divided into elastic support quality and rigid support quality.Analysis was made to the dynamic characteristics of the two parts in the UAV's taxiing phase, and the taxiing model of a wheeled UAV was established.Simulation tests of accelerated taxiing (take-off) and decelerated taxiing (landing) were made to the model, and the result show that the model is correct.
参考文献

[1] 张华亮.飞翼无人机地面滑跑建模与航向控制[J].系统仿真学报,2008,20(24): 6759-6762.

[2] 李峰,曹云峰,曹善文.某型无人机着陆过程中地面滑行段的建模与仿真[J].指挥控制系统与仿真,2006,28(2): 92-94.

[3] 袁东.飞机起落架仿真数学模型研究[J].飞行力学,2002,20(4): 44-47.

[4] 曹荣生.飞机起落架模型建立及着陆性能仿真分析[D].哈尔滨: 哈尔滨工程大学,2014.

[5] 陈磊.飞翼飞行平台地面滑跑建模与航迹纠偏控制研究[D].南京: 南京航空航天大学,2009.

[6] HANKE C R.The simulation of a large jet transport aircraft[R].Wichita: The Boeing Company,1971.

[7] 张曾铝,张江监,王裕昌.飞机起落架滑行载荷识别[J].航空学报,1994,15(1): 18-27.

[8] KARIYA Y,YAHAGI H.Modeling and designing aircraft taxiing patterns for a large airport[J].Advanced Robo-tics,2013,27(14):1059-1072.

[9] 胡浩.无人机进场着陆/地面滑跑控制与仿真[D].南京:南京航空航天大学,2011.

[10] SILKOY V,ZIRKA A.Calculation of the characteristics of a UAV launch from a ramp[J].Aviation,2014,18(4):178-184.

王程坤, 李秀娟. 轮式无人机地面滑跑模型的建立[J]. 电光与控制, 2017, 24(2): 89. WANG Cheng-kun, LI Xiu-juan. Establishment of Taxiing Model for a Wheeled UAV[J]. Electronics Optics & Control, 2017, 24(2): 89.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!