光子学报, 2013, 42 (8): 943, 网络出版: 2013-09-25   

基于权重的子孔径拼接优化算法研究

Global Optimization Algorithm of Subaperture Stitching Weight Coefficients
作者单位
1 西安工业大学 陕西省薄膜与光学检测技术重点实验室, 西安 710032
2 Optical Bioimaging Lab, National University of Singapore Singapore 117574
摘要
为了提高大口径光学元件面形拼接检测准确度,减少传统子孔径拼接算法带来的误差传递和积累,并在原有全局优化拼接算法的基础上引入权重系数,使全口径内各相邻子孔径之间的重叠区域达到最优匹配,使拼接误差最小化.利用该优化算法对平面进行了多孔径拼接仿真模拟,在此基础上对150mm口径的平面镜进行了实验,并提出基于图像边缘轮廓特征提取的子孔径定位新方法,分析了影响拼接误差的因素.仿真和实验结果均证明了基于权重的全局优化拼接算法的有效性和可行性.
Abstract
In order to obtain the whole lens′ precision surface information and reduce its errors transfer and accumulation, a new global optimization stitching algorithm based on weight coefficient is presented. The common region of the two neighborhood subaperture can reach the optimal match and the stitching error is minimized by using this algorithm. The multiapertures stitching simulation is carried out, and an actual experiment is carried to the flat lens of 150 mm. A new subaperture position method based on the image edge contour feature extraction is introduced and the error factors are analyzed for stitching. Both the simulation and the experiment results show that this global optimization stitching algorithm is good for reducing the transfer and accumulation error, which exist in the traditional method, and realizing the high precision subaperture stitching measurement.
参考文献

[1] 侯溪,伍凡,杨力,等.子孔径拼接干涉测试技术现状及发展趋势[J].光学与光电技术,2005,3(3):50-53.

    HOU Xi, WU Fan, YANG Li, et al. Status and development trend of subaperture stitching interferometric testing technique[J]. Optics & Optoelectronic Technology, 2005, 3(3): 50-53.

[2] 郭红卫,陈明仪.圆柱坐标系下的多孔径扫描拼接技术的迭代方法 [J].光学学报,2000,20(8):1047-1052.

    GUO Hongwei, CHEN Mingyi. An iterative algorithm of multiaperture transformation and connection technique in cylindrical coordinates[J]. Acta Optica Sinica, 2000, 20(8): 1047-1052.

[3] 刘军,舒晓武,白剑,等.大口径数字波面检测技术的研究[J].光学仪器, 2003, 25(06): 3-7.

    LIU Jun, SHU Xiaowu, BAI Jian, et al. Reserch on technique of large aperturedigital wavefront test[J]. Optical Instruments, 2003, 25(06): 3-7.

[4] ZHANG P, ZHAO H, LIU B, et al. Simple method for the implementation of subaperture stitching interferometry[J]. Optical Engineering, 2011, 50(9): 095601095601-8.

[5] 张蓉竹,石琪凯,蔡邦维,等.子孔径拼接干涉检测实验研究[J].光学技术,2004,30(02):173-175.

    ZHANG Rongzhu, SHI Qikai, CAI Bangwei, et al. Study on the experiments of the stitching interferometer[J]. Optical Technique, 2004, 30(02): 173-175.

[6] 朱黎明.基于子孔径拼接的非球面检测方法研究[D].哈尔滨:哈尔滨工业大学,2009.

    ZHU Liming. The research on the testing methods of aspheric mirror based on subaperture stitching[D]. Harbin: Harbin Institute of Technology, 2009.

[7] 张明意,李新南. 子孔径拼接检验法中倾斜的影响及消除方法[J]. 光电工程, 2006, 33(08):117-122.

    ZHANG Mingyi, LI Xinnan. Influence of tilt in stitching Interferometry and how to eliminate it[J].OptoElectronic Engineering, 2006, 33(08): 117-122.

[8] 李新南,张明意.大口径光学平面的子孔径拼接检验研究[J].光学技术,2006,32(04):514-517.

    LI Xinnan, ZHANG Mingyi. Study on the subaperture stitching interferometry for large planooptics[J]. Optical Technique, 2006, 32(04): 514-517.

[9] 汪利华,吴时彬,侯溪,等.子孔径拼接干涉检测大口径平面波前[J].光电工程,2009,36(06):126-130.

    WANG Lihua,WU Shibin,HOU Xi, et al. Measurement of flat wavefront by subaperture stitching interferometry[J]. OptoElectronic Engineering, 2009, 36(06): 126-130.

[10] 王孝坤,郑立功,张学军,等.子孔径拼接干涉检测离轴非球面研究[J].光子学报,2011,40(01):92-97.

    WANG Xiaokun, ZHENG Ligong, ZHANG Xuejun, et al. Testing an offaxis asphere by subaperture stitching interferometry[J]. Acta Photonica Sinica, 2011, 40(01): 92-97.

[11] 云宇,彭勇,田小强,等.基于子孔径拼接原理检测大口径光学元件[J].强激光与粒子束,2011,23(07):1831-1834.

    YUN Yu, PENG Yong, TIAN Xiaoqiang, et al. Large aperture optical components test based on subaperture stitching[J]. High Power Laser and Particle Beams, 2011, 23(07): 1831-1834.

[12] BURGE J H, ZHAO C. Applications of subaperture stitching interferometry for very large mirrors[C]. SPIE, 2012, 8450: 84500X1-10.

[13] SU P, BURGE J H, PARKS R E. Application of maximum likelihood reconstruction of subaperture data for measurement of large flat mirrors[J]. Applied Optics, 2010, 49(1): 21-31.

[14] HOU X, WU F, YANG L, et al. Fullaperture wavefront reconstruction from annular subaperture interferometric data by use of Zernike annular polynomials and a matrix method for testing large aspheric surfaces[J]. Applied optics, 2006, 45(15): 3442-3455.

[15] YANG Pengqian, HIPPLER Stefan, YAN Zhaojun,et al. Surface figure measurement of flat mirrors based on the subaperture stitching interferometry[C]. SPIE, 2012, 8417: 8417231-6.

田爱玲, 吴世霞, 刘丙才, 张鹏飞. 基于权重的子孔径拼接优化算法研究[J]. 光子学报, 2013, 42(8): 943. TIAN Ailing, WU Shixia, LIU Bingcai, ZHANG Peifei. Global Optimization Algorithm of Subaperture Stitching Weight Coefficients[J]. ACTA PHOTONICA SINICA, 2013, 42(8): 943.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!