铜钢异种合金激光对接焊工艺研究

蔡远征; 闫飞; 黎硕; 米高阳; 王春明; 胡席远

doi:doi:10.14128/j.cnki.al.20173705.829

应用激光, 2017, 37 (6): 829, 网络出版: 2018-01-10

铜钢异种合金激光对接焊工艺研究

A Study of Copper-steel Dissimilar Alloy Laser Welding

论文大纲

蔡远征 ^*闫飞黎硕米高阳王春明胡席远

作者单位

华中科技大学材料成型及模具技术国家重点实验室, 湖北武汉 430074

激光技术焊缝成形 laser technique T2 T2 SUS304 SUS304 weld profile

摘要

采用光纤激光对2 mm厚T2紫铜板和SUS304不锈钢板进行焊接, 研究了激光偏角、离焦量以及焊接速度对焊缝成形的影响规律。结果表明, 激光偏角为正,离焦量为正以及合适的焊接速度下可以获得焊缝成形良好的接头。研究还发现, 在熔池的流动搅拌作用下, Fe元素呈杂乱状卷入焊缝中, 弥散分布或聚集呈块状或条状分布在焊缝中, 铜和钢导热系数的巨大差异导致焊缝两侧的成形过程不同。

Abstract

Dissimilar alloy of T2 copper plate and SUS304 stainless plate of 2 mm thick were welded using the fiber laser welding technology. Influences of the laser angle, defocus amount and welding speed on formations on welded joints were studied in details. The results showed that welded joints with good appearances and performances could be obtained with optimized parameters of positive laser angle, positive defocus amount and suitable welding speed. The results also revealed that the distribution of the Fe element was disordered within the weld owing to the flow of molten pool. Moreover, the Fe element also gathered in form of block or strip. The great difference between thermal conductivity of copper and steel resulted in different forming processes on both sides of the weld.

参考文献

[1] 刘鸽平, 黄春平, 陈文亮.中厚板铜/钢搅拌摩擦焊焊接缺陷分析[J].现代焊接, 2011, 108(12): 26-27.

[2] 韩彩霞, 张柯柯, 杨蕴林, 等.钢与铜及铜合金的焊接研究现状[J].热加工工艺, 2003(6): 55-59.

[3] 侯林涛, 陈文革, 刘盈斌, 等.铜钢异质复合材料连接特性的分析[J].材料研究学报, 2015, 29(9): 693-696.

[4] 王克鸿, 徐越兰, 孔建寿, 等.铜一钢接头的钢焊丝熔化极CO2焊[J].焊接学报, 1996, 17(4): 258-262.

[5] 于海平, 范治松, 赵岩, 等.紫铜－碳钢磁脉冲焊接接头界面形貌研究[J].材料科学与工艺, 2015, 23(3): 1-6.

[6] 付俊, 黄坚, 姚成武, 等.铜钢激光对接焊研究[J].中国激光, 2009, 36(5): 1256-1260.

[7] 郭红.铜与不锈钢的真空钎焊[D].武汉: .武汉理工大学, 2003.

[8] MAI T A,SPOWAGE A C.Characterisation of dissimilar joints in laser welding of steel-kovar, copper-steel and copper-aluminium[J].Materials Science and Engineering A, 2004(374): 224-233.

[9] SIBILLANO T, ANCONA A, BERARDI V, et al.Optical detection of conduction/keyhole mode transition in laser welding [J].Journal of Materials Processing Technology, 2007(191): 364-367.

[10] 侯林涛, 陈文革, 刘盈斌, 等.铜钢异质复合材料连接特性的分析[J].材料研究学报, 2015, 29(9): 697-69.

蔡远征, 闫飞, 黎硕, 米高阳, 王春明, 胡席远. 铜钢异种合金激光对接焊工艺研究[J]. 应用激光, 2017, 37(6): 829. Cai Yuanzheng, Yan Fei, Li Shuo, Mi Gaoyang, Wang Chunming, Hu Xiyuan. A Study of Copper-steel Dissimilar Alloy Laser Welding[J]. APPLIED LASER, 2017, 37(6): 829.

铜钢异种合金激光对接焊工艺研究

关于本站 Cookie 的使用提示

全站搜索

铜钢异种合金激光对接焊工艺研究

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索