光学技术, 2018, 44 (6): 727, 网络出版: 2019-01-10  

机载平视显示器数字像源背光组件设计

Design of digital image source backlight assembly for airborne head-up display
作者单位
中航华东光电有限公司 安徽省现代显示技术重点实验室 特种显示国家工程实验室 国家特种显示工程技术研究中心, 安徽 芜湖 241002
摘要
随着COB封装技术发展, 采用LED芯片构建液晶显示器背光组件成为一种新的思路; 提出了LED芯片COB板结合配光透镜阵列的透镜阵列型COB新颖背光组件; 通过LIGHTTOOLS软件构建了3.8 Inch机载平视显示器数字像源背光组件模型, 仿真分析照度均匀性达到98%, 空间亮度均匀性超过85%, 光能利用率超过90%。与LED芯片COB板背光组件、及机载平视显示器正用数字像源LED灯珠阵列背光组件照度、空间亮度和强度视角分布进行了仿真对比, 在同样输出3150 Lumen情况下, 透镜阵列型 COB背光组件照度超过6.6×105Lux、空间亮度接近2.0×106Nit, 远远超过其他两种背光形式, 同时保持了与LED灯珠阵列背光基本相同的视角包络。
Abstract
With the development of COB packaging technology, it is a new idea to build LCD backlight assembly directly using LED chips. A novel Lens array COB backlight assembly is proposed, which is composed of COB LED chip board and light distribution lens array. The 3.8-inch digital image source backlight assmbly model of airborne head-up display (HUD) is constructed by LIGHTTOOLS software. Simulation analysis shows that the illumination uniformity is up to 98%, the spatial brightness uniformity is over 85%, and the utilization rate of light is more than 90%. Compared with LED chip COB board backlight assembly and existing HUD LED lamp array backlight assembly in illuminance, spatial luminance and intensity distribution, finding in the case of the same output 3150lm, the lens array COB backlight assembly illumination is more than 660000cd/m2, the spatial brightness is close to 2000000nit, which is far more than the other two forms of backlight, while maintaining the same intensity distribution envelope with existing HUD LED lamp array backlight assembly.
参考文献

[1] Li H T, Chen SH CH, Han Y J, et al. A fast feedback method to design easy-molding freeform optical system with uniform illuminance and high light control efficiency [J]. Opt Express,2013,21(1):1258-1268.

[2] Chen SH CH, Lin J Y, ChiuHsuanyi. Rectangular illumination using a secondary optics with cylindrical lens for LED street light [J]. Opt Express,2013,21(3):3201-3211.

[3] Mao X L, Li H T, Han Y J, et al. Two-step design method for highly compact three-dimensional freeform optical system for led surface light source [J]. Opt Express,2014,22(S6):1491-1506.

[4] 闫国栋. 大功率LED 集成光源的二次光学系统设计方法研究[D]. 广州:广东工业大学,2013.

    Yan Guodong. Study on secondary optical system design for high-power led integrated source [D]. Guangzhou:Guangdong Universityof Technology,2013.

[5] 张奇辉. 大功率LED 照明系统光学设计方法研究[D]. 广州:华南理工大学,2010.

    Zhang Qihui. Study on optical design methods for high-power led lighting [D]. Guangzhou:South China University of Technology,2010.

[6] 冯奇斌, 李亚妮, 李其功, 等. 用于头显液晶像源LED背光的双自由曲面透镜阵列设计[J]. 光学学报,2015,35(11):1123003(1)-1123003(9).

    Feng Qibin, Li Yani, Li Qigong, et al. Lens array with double freeform surface for led backlight in lcd imaging engine of helmet-mounted display [J]. Acta Optica Sinica, 2015,35(11):1123003(1)-1123003(9).

[7] 杨朔. LED防爆灯:中国,200910072664.8[P].2011-03-30.

    Yang Shuo. LED explosion-proof lamp:China,200910072664.8[P]. 2011- 03-30.

[8] 李建胜, 方志烈, 李琳. 高效散热型COB LED日光灯[J]. 照明工程学报,2010,21(s1):49-51.

    Li Jiansheng, Fang Zhilie, Li Lin. COB led tube light of highly effective dissipate heat[J]. Zhaoming Gongcheng Xuebao:Supplement,2010,21(s1):49-51.

[9] 林丞. 阵列式微型透镜封装多芯片COB LED的光学仿真设计及应用[J] . 应用光学, 2014,35(6):1063-1068.

    Lin Cheng. Optical stimulation and application of multi-chip COB LED packaging with minitype lens array[J]. Journal of Applied Optics,2014, 35(6):1063-1068.

[10] 周镇, 苏成悦, 付倩, 等. 一种基于自由曲面的LED准直透镜设计[J]. 应用光学, 2012,33(6):1058-1062.

    Zhou Zhen, Su Chengyue, Fu Qian, et al. LED collimating lens based on free-form surface[J]. Journal of Applied Optics,2012,33(6):1058-1062.

杨新军, 向艳, 朱标, 沈建. 机载平视显示器数字像源背光组件设计[J]. 光学技术, 2018, 44(6): 727. YANG Xinjun, XIANG Yan, ZHU Biao, SHEN Jian. Design of digital image source backlight assembly for airborne head-up display[J]. Optical Technique, 2018, 44(6): 727.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!