[1] 朱征. 机械工程材料［M］. 北京： 国防工业出版社, 2007. 148～150

    Zhu Zheng. Mechanical Engineering Materials［M］. Beijing: National Defense Industry Press, 2007. 148～150

[2] A. Yakovlev, Ph. Bertrand, I. Smurov. Laser cladding of wear resistant metal matrix composite coating［J］. Thin Solid Films, 2004, 453-454:133～138

[3] Zhixiang Zeng, Yan Zhou, Bin Zhang et al.. Designed fabrication of hard CrCr2O3Cr7C3 nanocomposite coatings for antiwear application［J］. Acta Materialia, 2009, 57(18): 5342～5347

[4] C. Sudha, P. Shankar, R. V. Subba Rao et al.. Microchemical and microstructural studies in a PTA weld overlay of NiCrSiB alloy on AISI 304L stainlesss steel［J］. Surf. Coat. Technol., 2008, 202(10): 2103～2112

[5] M. Zhang, W. Liu. Laser surface cladding: the state of the art and challenges［J］. Proc. IMechE Part C: J. Mechanical Engineering Science, 2010, 224(5): 1041～1060

[6] 陈永哲，王存山，李婷 等. 镁合金表面激光熔覆NiZrAl合金涂层成分设计与组织性能［J］. 中国激光, 2009, 36(8): 2187～2191

    Chen Yongzhe, Wang Cunshan, Li Ting et al.. Composition design and properties of laser clad NiZrAl alloy coating on the magnesium surface［J］. Chinese J. Lasers, 2009, 36(8): 2187～2191

[7] 张现虎，晁明举，梁二军 等. 激光熔覆原位生成TiCZrC颗粒增强镍基复合涂层［J］. 中国激光, 2009, 36(4): 998～1004

    Zhang Xianhu, Chao Mingju, Liang Erjun et al.. Insitu synthesis of TiCZrC particulate reinforced Nibased composite coatings by laser cladding［J］. Chinese J . Lasers, 2009, 36(4): 998～1004

[8] 张大伟，张新平. 激光熔覆NiCr3C2 涂层的微观组织及磨损性能［J］. 农业机械学报, 2005, 36(6): 110～113

    Zhang Dawei, Zhang Xinping. Microstructure and dry slide wear performance of laserclad NiCr3C2 composite coating［J］. Agricultural Machinery Institution, 2005, 36(6): 110～113

[9] DaWei Zhang, T. C. Lei, FuJun Li. Laser cladding of stainless steel with NiCr3C2 for improved wear performance［J］. Wear, 2001, 251(1): 1372～1376

[10] H. Zhang, Y. Shi, M. Kutsuna et al.. Laser cladding of colmonoy 6 powder on AISI316L austenitic stainless steel［J］. Nuclear Engineering and Design, 2010, 240(10): 2691～2696

[11] 石岩，张宏，徐春鹰. 激光熔覆科尔莫落依合金涂层的奥氏体不锈钢表面组织和耐磨性研究［J］. 兵工学报, 2010, 31(7): 928～932

    Shi Yan, Zhang Hong, Xu Chunying. Research on the structure and wear resistance of colmonoy 6 alloy coating cladded on austenitic stainless steel by laser［J］. Acta Arm Amentar, 2010, 31(7): 928～932

[12] John C. Betts. The direct laser deposition of AISI316 stainless steel and Cr3C2 powder［J］. J. Mater. Process. Technol., 2009, 209(11): 5229～5238

[13] 涂义，张永忠，席明哲. 不锈钢表面激光熔覆镍基合金层研究［J］. 稀有金属, 2008, 32(5): 599～603

    Tu Yi, Zhang Yongzhong, Xi Mingzhe. Investigation of nickelbased alloys coatings on stainless steel by laser cladding［J］. Chinese J. Rare Metals, 2008, 32(5): 599～603

[14] 吕旭东，王华明. 激光熔覆Mo2Ni3Si/NiSi金属硅化物耐磨复合材料涂层组织与耐磨性［J］. 稀有金属材料与工程, 2003, 32(10): 848～851

    Lü Xudong, Wang Huaming. Microstructure and wear properties of laser clad Mo2Ni3Si/NiSi silicide composite coatings［J］. Rare Metal Materials and Engineering, 2003, 32(10): 848～851

[15] 石世宏，傅戈雁，李龙 等. 中空激光光内同轴送丝熔覆工艺的实现及其试验研究［J］. 中国激光, 2010, 37(1): 266～270

    Shi Shihong, Fu Geyan, Li Long et al.. Realization and research of laser cladding with method of internal wire feeding through a hollow laser beam［J］. Chinese J. Lasers, 2010, 37(1): 266～270

[16] 刘双. 核阀密封面无钴镍基合金涂层材料及熔覆工艺研究［D］. 苏州： 苏州大学, 2010. 22～24

    Liu Shuang. Research on CoFree NiBased Alloy and Laser Cladding Process Applied in Nuclear Valve Sealing Surface Hardening［D］. Suzhou: Soochow University, 2010. 22～24

[17] Rajnesh Tyagi, Dangsheng Xiong, Jianliang Li. Effect of load and sliding speed on friction and wear behavior of silver/hBN containing Nibase P/M composites［J］. Wear, 2011, 270(78): 423～430

[18] 俞友军，周建松，陈建敏 等. 激光熔覆NiCr/Cr3C2AgBaF2/CaF2金属基高温自润滑耐磨覆层的组织结构及摩擦学性能［J］. 中国表面工程, 2010, 23(3): 64～73

    Yun Youjun, Zhou Jiansong, Chen Jianmin et al.. Microstructure and tribological behavoir of laser cladding NiCr/Cr3C2AgBaF2/CaF2 selflubrication wearresistance metal matrix composite coating［J］. China Surface Engineering, 2010, 23(3): 64～73