基于FPGA的FBG温度传感器解调系统设计

郎月; 佟首峰

doi:doi:10.3788/lop50.090601

激光与光电子学进展, 2013, 50 (9): 090601, 网络出版: 2013-08-08

基于FPGA的FBG温度传感器解调系统设计

Design of Demodulation System of Fiber Bragg Grating Temperature Sensor Based on FPGA

论文大纲

郎月 ^*佟首峰

作者单位

长春理工大学空间光电技术研究所, 吉林长春 130022

光纤光学解调系统现场可编程门阵列法布里珀罗滤波器 fiber optics demodulation system field programmable gate array Frbry-Perot filter

摘要

提出一种针对光纤布拉格光栅(FBG)温度传感器的解调系统设计。基于直接数字合成器（DDS)原理，利用现场可编程门阵列（FPGA）构成可调法布里珀罗(F-P)滤波器的驱动电压，电压峰峰值可达10 V。提出利用FPGA控制多个模/数（A/D）转换器来流水线式读取数据构成采集模块，实现四通道检测。为增加解调的实时性，实现实时校准功能，摒弃常用的参考光纤，引入梳状滤波器。对FBG进行定标，并在30 ℃～100 ℃间对所设计的解调系统进行检测，利用电子温度计与光谱仪同时检测，比较两组数据来对设计的解调系统进行性能评估。平均温度误差为0.19129 ℃，最小温度差值为0.045 ℃，分辨率1 pm。

Abstract

A design scheme of demodulation system based on field programmable gate array (FPGA) for fiber Bragg grating(FBG) temperature sensor is proposed. Using the principle of (direct digital synthesizer (DDS), the drive voltage of Fabry-Perot (F-P) filter is constituted by FPGA. It can achieve 10 V. Many analog-to-digital (A/D) converters are controlled by FPGA to make up the successive data acquisition module. It can get the result in real time. The comb-shaped filter is used to correct the system in time. The index of a FBG sensor is calibrated confirmed. The system is used for denodulation between 30 ℃ and 100 ℃, and electronic thermometer and spectrograph are used to get the accurate result. The different records can be compared to assess the performance of system. The mean error of temperature is 0.19129 ℃, and the minimum temperature is 0.045 ℃, with the resolution being 1 pm.

参考文献

[1] 张乐, 吴波, 叶雯, 等. 基于光纤光栅法布里珀罗腔锁频原理的高灵敏度光纤振动传感器[J]. 光学学报, 2011, 31(4): 0406006.

Zhang Le, Wu Bo, Ye Wen, et al.. Highly sensitive fiber-optic vibration sensor based on frequency looking of a FBG F-P cavity[J]. Acta Optica Sinica, 2011, 31(4): 0406006.

[2] 鲍吉龙, 赵洪霞, 程培红, 等. 一种双段多层长周期光纤光栅光谱特性研究[J]. 光学学报, 2013, 33(1): 0106001.

Bao Jilong, Zhao Hongxia, Cheng Peihong, et al.. Research on optical-spectral characteristics of two-section and multi-layer long-period fiber grating[J]. Acta Optica Sinica, 2013, 33(1): 0106001.

[3] Kumazaki H, Yamada H, Nakamura H. Tunable wavelength filter using a Bragg grating fiber thinned by plasma etching[J]. IEEE Photon Technol Lett, 2011, 13(11): 1206-1208.

[4] 王清伟,刘月明, 田维坚, 等. 长周期光纤光栅传感信号解调技术研究现状[J]. 激光与光电子学进展, 2012, 49(8): 080004.

Wang Qingwei, Liu Yueming, Tian Weijian, et al.. Review and progress on sensing signal interrogation techniques of long period fiber grating[J]. Laser & Optoelectronics Progress, 2012, 49(8): 080004.

[5] 张志强, 张金波. 基于DDS/SOPC的谐波信号发生器的设计[J]. 自动化与仪器, 2008, 28(8): 18-21.

Zhang Zhiqiang, Zhang Jinbo. The design of harmonic signal generator based on DDS/SOPC[J]. Automation & Instrumentation, 2008, 28(8): 18-21.

[6] 卢珞先, 任立志. 基于FPGA的网络接口设计与应用[J]. 电测与仪表, 2008, 45(12): 56-58.

Lu Luoxian, Ren Lizhi. Design and application of the network interface based on FPGA[J]. Electrical Measurement and Instrumentation, 2008, 45(12): 56-58.

[7] 陈传虎.基于RTL8019AS的串口与以太网接口转换器的设计[J]. 电子工程师, 2008, 34(3): 51-53.

Chen Chuanhu. The design of converter between serial and ethernet interface based on RTL8019AS[J]. Electronic Engineer, 2008, 34(3): 51-53.

[8] 李森. 压电陶瓷微位移驱动器输出特性的研究[D]. 合肥: 合肥工业大学, 2007. 20-22.

Lin Sen. Study the Output Characteristic of Piezoelectric Ceramics Micro-Displacement Driver[D]. Hefei: Hefei University of Technology, 2007. 20-22.

郎月, 佟首峰. 基于FPGA的FBG温度传感器解调系统设计[J]. 激光与光电子学进展, 2013, 50(9): 090601. Lang Yue, Tong Shoufeng. Design of Demodulation System of Fiber Bragg Grating Temperature Sensor Based on FPGA[J]. Laser & Optoelectronics Progress, 2013, 50(9): 090601.

基于FPGA的FBG温度传感器解调系统设计

关于本站 Cookie 的使用提示

全站搜索

基于FPGA的FBG温度传感器解调系统设计

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索