中国激光, 2013, 40 (7): 0708003, 网络出版: 2013-05-15   

基于光纤干涉投影的傅里叶变换轮廓术应用研究

Applied Research on Fiber-Optic Interferometer Projection of Fourier Transform Profilometry
作者单位
南京理工大学电子工程与光电技术学院, 江苏 南京 210094
摘要
基于光纤干涉投影傅里叶变换轮廓术,提出了减小其测量物体形貌中误差的方法。在理论上分析了光纤干涉在接收屏上的光强分布,并通过分析得到其强度满足一定的高斯分布。在条纹预处理过程中对其进行光强校正,校正后的条纹频谱基频成分更加清晰。分析了条纹非正弦性引起的相位误差,在测量结果上对其进行补偿。通过仿真实验得出,经过所提出方法处理后的面形恢复精度比未处理前有了很大程度的提高。实物实验对给定标准件进行测量,验证了这种方法的正确性。
Abstract
To reduce the error in the measurement of object morphology, a method based on Fourier transform profilometry with optical fiber projection grating is proposed. The method analyzes the light intensity distribution that is projected on the receiver screen in theory. Its intensity meets certain Gaussian distribution by analyzing. The intensity correction is made in the process of fringe pretreatment and after correction the fundamental frequency components of stripes spectrum are clearer; the error that is brought by the non-sinusoidal stripe is compensated in the measurement of outcome. The simulation result shows that the accuracy of shape restoration has been greatly improved by the proposed method. The experiments on a standard object verify this method.
参考文献

[1] S. S. Gorthi, P. Rastogi. Fringe projection techniques: whither we are [J]. Opt. & Laser Eng., 2010, 48(2): 133~140

[2] X. Su, W. Chen. Fourier transform profilometry: a review [J]. Opt. & Lasers in Eng., 2001, 35(5): 263~284

[3] 范华, 田丰, 谭玉山. 单模光纤相移三维轮廓测量术[J]. 中国激光, 1998, A25(2): 135~138

    Fan Hua, Tian Feng, Tan Yushan. Three-dimensional profilometry using a single mode optical fiber phase-shifting method [J]. Chinese J. Lasers, 1998, A25(2): 135~138

[4] 张超, 段发阶, 邢明浩 等. 光纤干涉投射实时傅里叶轮廓术的研究[J]. 光学学报, 2011, 31(2): 0207001

    Zhang Chao, Duan Fajie, Xing Minghao et al.. Fiber-optic interferometer projection of real time Fourier profilometry [J]. Acta Optica Sinica, 2011, 31(2): 0207001

[5] F. Wu, H. Zhang, M. J. Lalor et al.. A novel design for fiber optic interferometric fringe projection phase-shifting 3-D profilometry [J]. Opt. Commun., 2001, 187(4-6): 347~357

[6] J. D. Valera, J. D. C. Jones. Phase stepping in projected-fringe fibre based moire interferometry [J]. Electron. Lett., 1993, 29(20): 1789~1791

[7] V. Srinivasan, H. C. Liu, M. Halioua. Automated phase-measuring profilometry of 3-D diffuse objects [J]. Appl. Opt., 1984, 23(18): 3105~3108

[8] M. Takeda, H. Ina, S. Kobayashi. Fourier-transform method of fringe-pattern analysis for computer-based topography and interferometry [J]. J. Opt. Soc. Am., 1982, 72(1): 156~160

[9] N. Takai, T. Asakura. Statistical properties of laser speckles produced under illumination from a multimode optical fiber [J]. J. Opt. Soc. Am. A, 1985, 2(8): 1282~1290

朱荣刚, 朱日宏, 宋倩, 李建欣, 李金鹏. 基于光纤干涉投影的傅里叶变换轮廓术应用研究[J]. 中国激光, 2013, 40(7): 0708003. Zhu Ronggang, Zhu Rihong, Song Qian, Li Jianxin, Li Jinpeng. Applied Research on Fiber-Optic Interferometer Projection of Fourier Transform Profilometry[J]. Chinese Journal of Lasers, 2013, 40(7): 0708003.

本文已被 5 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!