大尺寸望远镜主镜组件有限元分析

陈宁; 陈兆兵; 王兵; 庄昕宇; 韩旭东

doi:doi:10.3969/j.issn.1003-501x.2012.05.022

光电工程, 2012, 39 (5): 133, 网络出版: 2012-05-31

大尺寸望远镜主镜组件有限元分析

The Finite Element Analysis of the Big Dimension Telescope Main Mirror Groupware

论文大纲

陈宁 ^*陈兆兵王兵庄昕宇韩旭东

作者单位

中国科学院长春光学精密机械与物理研究所，长春 130033

主镜设计环境适应性有限元分析应变分析 main mirror design environment adaptability finite element analysis emergency analysis

摘要

为定量分析大尺寸望远镜自身重力对主镜镜面变形造成的影响，采用有限元的手段以非线性分析方法的 ABAQUS软件为研究工具对某大尺寸望远镜主镜组件进行了精确有限元分析。在分析过程中将罚函数的摩擦形式引入至主镜组件的摩擦接触中，分别对组件的球头接触、芯轴接触进行了建模，完成了对于组件 Y向与 Z向的各部分应变分析。分析表明该主镜组件因自身重力作用造成的面形变化非常小， RMS方面的 Y向与 Z向面形变形分别为 16 nm和 13 nm，而主镜绕 X轴倾斜量在 Y向和 Z向分别为 0.5″和 0.02″，完全满足使用条件。该分析为该望远镜的后续研制提供了参考。

Abstract

The big dimension telescope main mirror was exactly analyzed by ABAQUS finite element software using none linearity analysis method, which can quantitatively analyze the main mirror distortion caused by the big dimension telescope main mirror self weight. The scrub form of punish function was introduced to the scrub contact of the main mirror groupware in the analysis course. The ball head touch and core axes touch were molded and an emergency analysis of the mirror groupware Y and Z directions were completed. The surface appearance change was very little, which was caused by the self weight of the mirror groupware. The Y and Z directions of the RMS were 16 nm and 13 nm. And the Yand Z directions of the main mirror rolling the X direction were 0.5″ and 0.02″. The system can completely satisfies the using condition. The analysis can offer some reference to the adding research of the telescope.

参考文献

[1] 姚平，张学军，张雨东 . 1.2 m能动镜的模式选择 [J].光电工程， 2011，38(12)：80-84. YAO Ping，ZHANG Xue-jun，ZHANG Yu-dong. The Mode Selection of a 1.2 m Active Mirror [J]. Opto-Electronic Engineering，2011，38(12)：80-84.

[2] KAI G，CHENG X，WEN C Y. Stochastic mathematic model of the fighting personnel and its application in effectiveness evaluation for small arm system. [C]//IEEE International Symposium on Communications and Information Technology (ISCIT 2005)，Beijing，Oct 12-14，2005：110-114.

[3] 李威，刘宏伟，郭权锋，等 . 空间相机主次镜间的薄壁筒和支杆组合支撑结构 [J].光学精密工程， 2010，18(12)： 2633-2641. LI Wei，LIU Hong-wei，GUO Quan-feng，et al. Combined supporting structure of thin wall joint cylinder and supporting bar between primary mirror and second mirror in space camera [J]. Optics and Precision Engineering，2010，18(12)：2633-2641.

[4] 关英俊，辛宏伟 . 大口径主反射镜支撑结构设计 [J].光电工程， 2010，37(12)：36-41. GUAN Ying-jun，XIN Hong-wei. Design of Support for Large Aperture Primary Mirror [J]. Opto-Electronic Engineering， 2011，37(12)：36-41.

[5] 章亚男，沈丽丽，沈卫星，等. 大口径透镜姿态调整机构的支承分布设计 [J].光学精密工程， 2010，18(12)：2624-2632. ZHANG Ya-nan，SHEN Li-li，SHEN Wei-xing，et al. Design of support distribution for attitude-adjusting mechanism of large lens [J]. Optics and Precision Engineering，2010，18(12)：2624-2632.

[6] Winter A H K. An example of simulation use in army weapon system development [C]// Simulation Conference Proceedings, Dayton，Dec 5-8，1999：213-217.

[7] 张倩，徐先锋，袁红光，等 . 四步相移数字全息干涉术相移提取和物光重建 [J].光电工程， 2011，38(8)：139-144. ZHANG Qian，XU Xian-feng，YUAN Hong-guang，et al. Phase-shift Extraction and Wave Reconstruction in Four-step Phase-shifting Interferometry [J]. Opto-Electronic Engineering，2011，38(8)：139-144.

[8] 王延风，卢志山，何惠阳，等. 磁悬浮精密定位工作台设计与有限元综合分析 [J].光学精密工程， 2011，19(5)：972-976. WANG Yan-feng，LU Zhi-shan，HE Hui-yang，et al. Design and finite element analysis of magnetic levitation precision stage [J]. Optics and Precision Engineering，2011，19(5)：972-976.

[9] KARSAZ A，KHALOOZADEH H. Error Analysis of Airborne Fire Control System Radar via Monte Carlo Approach [C]// 1st

International Symposium Systems and Control in Aerospace and Astronautics (ISSCAA 2006)，Haerbin，Jan 1-4，2006： 383-388.

[10] 张耀平，周宏，樊峻棋，等 . Bimorph变形镜 10.6 μm薄膜研究 [J].光电工程， 2011，38(12)：29-34. ZHANG Yao-ping，ZHOU Hong，FAN Ju-qi，et al. 10.6 μm Reflecting Coatings on Bimorph Mirror [J]. Opto-Electronic Engineering，2011，38(12)：29-34.

陈宁, 陈兆兵, 王兵, 庄昕宇, 韩旭东. 大尺寸望远镜主镜组件有限元分析[J]. 光电工程, 2012, 39(5): 133. CHEN Ning, CHEN Zhao-bing, WANG Bing, ZHUANG Xin-yu, HAN Xu-dong. The Finite Element Analysis of the Big Dimension Telescope Main Mirror Groupware[J]. Opto-Electronic Engineering, 2012, 39(5): 133.

大尺寸望远镜主镜组件有限元分析

关于本站 Cookie 的使用提示

全站搜索

大尺寸望远镜主镜组件有限元分析

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索