Based on the transverse-longitudinal mapping of Bessel beams, we propose a simple method to construct a self-similar Bessel-like beam whose transverse profile maintains a stretched form during propagation. Specifically, the propagating-variant width of this beam can be flexibly predesigned. We experimentally demonstrate three types of self-similar Bessel-like beams whose width variations are linear, piecewise, and period functions of propagation distance, respectively. The experimental results match well with the theoretical predictions. We also demonstrate that our approach enables the generation of self-similar higher-order vortex Bessel-like beams.

In the femtosecond two-photon polymerization (2PP) experimental system, optical aberrations degrade the fabrication quality. To solve this issue, a multichannel interferometric wavefront sensing technique is adopted in the adaptive laser processing system with a single phase-only spatial light modulator. 2PP fabrications using corrected high-order Bessel beams with the above solution have been conducted, and high-quality microstructure arrays of microtubes with 20 µm diameter have been rapidly manufactured. The effectiveness of the proposed scheme is demonstrated by comparing the beam intensity distributions and 2PP results before and after aberration corrections.