非球面非零位检测中的回程误差分析与校正

刘东; 杨甬英; 田超; 翁俊淼; 卓永模; 杨李茗

光学学报, 2009, 29 (3): 688, 网络出版: 2009-03-17

非球面非零位检测中的回程误差分析与校正

Analysis and Correction of Retrace Error for Nonnull Aspheric Testing

论文大纲

刘东 ^1,*杨甬英 ¹田超 ¹翁俊淼 ¹卓永模 ¹杨李茗 ²

作者单位

¹ 浙江大学现代光学仪器国家重点实验室, 浙江杭州 310027

² 中国工程物理研究院激光聚变研究中心, 四川绵阳 621000

非球面检测非零位检测回程误差误差校正 aspheric testing nonnull test retrace error error correction

摘要

光学测试中常用非零位法来对非球面进行初步检测。由于非零位法偏离了零位条件,导致检测得到的被测非球面面形与其真实面形存在一定程度的偏差(称之为回程误差)。分析了非球面非零位检测系统中的回程误差问题,得出了回程误差与被测非球面口径、相对口径以及非球面本身面形误差均紧密相关的结论。针对回程误差的表现形式,提出了有效校正回程误差的方法。计算机仿真及检测实验结果均表明,该方法可以较好地解决非球面非零位检测中的回程误差问题。针对非球面非零位检测中回程误差问题所做的分析以及提出的相应校正方法,有利于非球面非零位法检测精度的提高和系统的广泛应用。

Abstract

Nonnull test is often adopted in optical metrology for aspheric testing. But due to its violation of null condition, the obtained surface figure would be different from that of the real, which is called retrace error accordingly. Retrace error of nonnull aspheric testing is analyzed in detail with conclusions that retrace error has much to do with the aperture, relative aperture and surface shape error of the apsheric under test. Correcting methods are proposed according to the manner of the retrace errors. Both of computer simulation and experimental results show that the proposed methods can correct the retrace error effectively. The analysis and proposed correction methods bring much to the application of nonnull aspheric testing.

参考文献

[1] Paul Scott. Recent developments in the measurement of aspheric surfaces by contact stylus instrumentation[C]. SPIE, 2002, 4927:199～207

[2] 李直,赵洋,李达成等. 衍射型长程大型非球面轮廓测量仪[J]. 光学学报, 2002, 22(10): 1224～1228

Li Zhi, Zhao Yang, Li Dacheng et al.. A diffractive long trace profiler for large aspherical optics[J]. Acta Optica Sinica, 2002, 22(10): 1224～1228

[3] . A null corrector for paraboloidal mirrors[J]. Appl. Opt., 1963, 2: 153-156.

[4] 伍凡. 非球面零检验的Dall补偿器设计[J]. 应用光学, 1993, 14(02):1～4

Wu Fan. Design of dall compensator for aspherical surface null testing[J]. J. of Appl. Opt., 1993, 14(02):1～4

[5] . C. Wyant, V. P. Bennett. Using computer generated holograms to test aspheric wavefronts[J]. Appl. Opt., 1972, 11: 2833.

[6] . C. Wyant, C. R. Hayslett. Rough surface interferometry at 10.6 microns[J]. Appl. Opt., 1980, 19: 1862-1869.

[7] J. C. Wyant, K. Creath. Two-wavelength phase-Shifting interferometer and method[P]. U.S. Patent No.4,1989,832,489

[8] . . Radial shearing interferometer for in-process measurement of diamond turning[J]. Opt. Eng., 2000, 39: 2696-2699.

[9] Liu Dong, Yang Yongying, Shen Yibing et al.. System optimization of radial shearing interferometer for aspheric testing[C]. SPIE, 2007,6834: 68340U

[10] Yang Yongying, Liu Dong, Shen Yibing et al.. Study on testing larger asphericity in nonnull interferometer[C]. SPIE, 2007, 6834： 68340T

[11] Joseph M. Geary, Marty Yoo, Guojun Si. Retrace error: a case study[C]. SPIE, 1992, 1776: 98～105

[12] Neil Gardner and Angela Davies. Retrace error evaluation on a figure-measuring interferometer[C]. SPIE,2005, 5869： 58690V-1-8

[13] Ting-Chung Poon, Taegeun Kim. “Geometrical Optics” in Engineering Optics with Matlab[M]. Singapore: World Scientific Publishing, 2006

[14] Junmiao Weng, Yongying Yang, Dong Liu et al.. The wavefront aberration analysis and testing accuracy evaluation for the large aberration aspheric system based on the best fit sphere[C]. SPIE, 2007, 6834： 68342V

[15] . E. Greivenkamp, R. O. Gappinger. Design of a nonnull interferometer for aspheric wave fronts[J]. Appl. Opt., 2004, 43: 5143-5151.

刘东, 杨甬英, 田超, 翁俊淼, 卓永模, 杨李茗. 非球面非零位检测中的回程误差分析与校正[J]. 光学学报, 2009, 29(3): 688. Liu Dong, Yang Yongying, Tian Chao, Weng Junmiao, Zhuo Yongmo, Yang Liming. Analysis and Correction of Retrace Error for Nonnull Aspheric Testing[J]. Acta Optica Sinica, 2009, 29(3): 688.

非球面非零位检测中的回程误差分析与校正

关于本站 Cookie 的使用提示

全站搜索

非球面非零位检测中的回程误差分析与校正

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索