支撑应力对光刻透镜透射波前畸变的影响

王平; 田伟; 王汝冬; 王立朋

doi:doi:10.3788/co.20130601.0057

中国光学, 2013, 6 (1): 57, 网络出版: 2013-02-06

支撑应力对光刻透镜透射波前畸变的影响

Influence of mounting stress on wavefront distortion of lithographic object lens

论文大纲

王平 ^*田伟王汝冬王立朋

作者单位

中国科学院长春光学精密机械与物理研究所应用光学国家重点实验室，吉林长春 130033

摘要

为了设计光刻物镜的支撑结构，建立了支撑应力对透镜透射波前影响的模型，研究了该模型中支撑应力与折射率的关系及支撑应力对透镜透射波前畸变的影响。首先，根据晶体理论，建立了融石英透镜波前畸变与支撑应力之间关系的仿真模型。然后，分析了不同支撑结构下支撑应力与融石英透镜波前的关系。最后，分析了支撑应力造成的透射波前畸变的性质，并选择合适的物镜支撑结构。研究结果表明：光刻物镜支撑结构的支撑应力对透镜的透射波前有很大的影响:3点支撑的波前畸变PV值为369 nm；随着支撑点数量的增加，支撑应力造成的透射波前畸变逐渐减少；采用大于9点的支撑结构即可满足光刻投影物镜的元件支撑需求。

Abstract

To design the mounting structure of a lithographic object lens, the influence model of mounting stress on the lens wavefront distortion was built. The relation between mounting stress and refractivity and the influence of mounting stress on the wavefront distortion of the lens were studied. First, based on the crystal theory, the relationship of lens mounting stress and wavefront distortion of a fused silica lens was established. Then, the influence of different lens mounting structures on the lens wavefront distortion was analyzed. Finally, the properties of lens mounting wavefront distortion were researched, and the fitted lens mounting structure was selected. Analysis results indicate that the lens mounting stress has a great influence on the lens wavefront distortion. The wavefront distortion of a 3-point mounting structure is 369 nm. However, the wavefront distortion induced by mounting stress decreases with the increasing mounting points. The above 9-point mounting structure is fitted to the lithographic object lens.

参考文献

[1] NICHOLAS F B,CHARLENE S,DOUGLAS C A,et al.. Densification of fused silica under 193-nm excitation[J]. J. Opt. Soc. Am. B,1997,14(7):1606-1615.

[2] CHARLENE M S,NICHOLAS F B. Behavior of 157 nm excimer-laser-induced refractive index changes in silica[J]. J. Opt. Soc. Am. B,2006,23(9):1815-1821.

[3] YASUYUKI U. Distorted wave front produced by a high-resolution projection optical system having rotationally symmetric birefringence[J]. Appl. Opt.,1998,37(31):7241-7247.

[4] LIJUAN S,YANG C,ALLEN Y Y,et al... Refractive index variation in compression molding of precision glass optical components[J]. Appl. Opt.,2008,47(10):1662-1667.

[5] 杨光华，李艳秋.22 nm极紫外光刻物镜热和结构变形及其对成像性能影响[J].光学学报,2012,32(3):0322005.

YANG G H,LI Y Q. Thermal and structural deformation of projection optics and its influence on optical imaging performance for 22 nm extreme ultraviolet lithography[J]. Acta Optica Sinica,2012,32(3):0322005.(in Chinese)

[6] 王平，王汝冬，田伟，等.Fizeau干涉仪主机的热稳定性设计与分析[J].光学精密工程,2011,19(9):2100-2107.

WANG P,WANG R D,TIAN W,et al.. Design and analysis of thermal stability for main frame in Fizeau interferometer[J]. Opt. Precision Eng.,2011,19(9):2100-2107.(in Chinese)

[7] 齐文宗，黄伟，张彬，等.DF强激光反射镜热畸变的检测及热吸收的有限元分析[J].中国激光,2005,32(3)：379-383.

QI W Z,HUANG W,ZHANG B,et al.. Thermal distortion measurements and absorption analysis by finite element method of high power DF laser reflectors[J]. Chinese J Lasers,2005,32(3):379-383.(in Chinese)

[8] 冯志庆，白兰，张增宝，等.高能激光反射镜热变形补偿[J].光学精密工程,2010,18(8):1781-1787.

FENG ZH Q,BAI L,ZHANG Z B,et al.. Thermal deformation compensation of high-energy laser mirrors[J]. Opt. Precision Eng.,2010,18(8):1781-1787. (in Chinese)

[9] 章亚男，沈丽丽，沈卫星，等.大口径透镜姿态调整机构的支撑分布设计[J].光学精密工程,2010,18(12)：2624-2632.

ZHANG Y N,SHEN L L,SHEN W X,et al.. Design of support distribution for attitude-adjusting mechanism of large lens[J]. Opt. Precision Eng.,2010,18(12):2624-2632.(in Chinese)

[10] 杜少军，陆启生，舒柏宏.激光窗口热效应和应力双折射的分析[J].强激光与粒子束，2004,16(5):575-581.

DU SH J,LU Q SH,SHU B H. Analysis on thermal effect and stress-birefringence of laser window[J]. High Power Laser And Particle Beams,2004,16(5):575-581.(in Chinese)

[11] 徐新华，王青，宋波，等.基于子孔径拼接技术的大尺寸光学材料均匀性检测系统[J].光学学报，2012，32(4)：0412002.

XU X H,WANG Q,SONG B,et al.. Measurement system of optical homogeneity of large-size optical material based on subaperture stitching technique[J]. Acta Optica Sinica,2012,32(4):0412002.(in Chinese)

[12] 李熙斌，王海军，袁晓东，等.CO2激光辐照对融石英表面形貌与应力分布的影响 [J].中国激光,2011,38(9)：0903002.

LI X B,WANG H J,YUAN X D,et al.. Effects of CO2 laser irradiation on surface morphology and stress distribution of fused silica[J]. Chinese J. Lasers,2011,38(9):0903002.(in Chinese)

[13] 袁文泉，巩岩.光刻物镜中主动液体透镜的像差特性研究[J].光学学报,2011,31(12):1222003.

YUAN W Q,GONG Y. Study on characteristics of Aberrations for an Active liquid lens in lithographic objective lens[J]. Acta Optica Sinica,2011,31(12):1222003.(in Chinese)

[14] 王辉.极紫外光刻系统物镜光学元件的支撑与分析[J].中国光学与应用光学，2010，3（6）：598-604.

WANG H. Objective optical mounts and analysis for EUVL[J]. Chinese J. Optics and Appl. Optics,2010,3(6):598-604.(in Chinese)

[15] 玻恩，沃尔夫.光学原理[M].杨葭孙,译.北京：科学出版社,1978:182-190.

BORN M,WOLF E. Principles of Optics[M]. YANG J S,Transl. Beijing:Science Press,1978:182-190.(in Chinese)[16]GRENINGER C E,NEEDHAM G A,JR J R. Optical distortions and birefringence in high power laser windows:model and computer code[J]. Appl. Opt.,1985,24(17):2797-2803.

王平, 田伟, 王汝冬, 王立朋. 支撑应力对光刻透镜透射波前畸变的影响[J]. 中国光学, 2013, 6(1): 57. WANG Ping, TIAN Wei, WANG Ru-dong, WANG Li-peng. Influence of mounting stress on wavefront distortion of lithographic object lens[J]. Chinese Optics, 2013, 6(1): 57.

支撑应力对光刻透镜透射波前畸变的影响

关于本站 Cookie 的使用提示

全站搜索

支撑应力对光刻透镜透射波前畸变的影响

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索