光学仪器, 2013, 35 (6): 74, 网络出版: 2014-01-08
透明台阶的白光干涉测量方法研究
Study on the measurement of transparent step by white-light interferometer
摘要
Veeco NT3300表面轮廓仪是基于白光干涉原理的一种非接触测量设备,它的垂直扫描干涉模式可以实现对物体表面形貌的非接触测量。在利用垂直扫描干涉模式对光刻胶形成的透明台阶测量时,设置不同的测量参数会导致较大的测量误差,通过对垂直扫描干涉模式的原理和测量系统的分析,找到了误差产生的原因,并通过合理的测量参数的设置,实现了对透明台阶的准确测量,满足了应用需求。
Abstract
As non-contact optical profilers, Veeco NT3300 works on the principle of white-light interference, the object’s surface is measured without contact by its vertical scanning interferometer model. During the measurement of steps which are transparent for white-light, significant measurement offset is always observed because of different scanning parameters setting. Therefore, the principle of vertical scanning interferometer model and the measuring systems is analyzed and the factors leading to offset are also found. At last, the precise measurement results for transparent steps are obtained to meet application requirements.
参考文献
[1] 尚妍,徐春广.光学非接触廓形测量技术研究进展[J].光学技术,2008,34:216-217
[2] 徐德衍,林尊琪.光学表面粗糙度研究的进展与方向[J].光学仪器,1996,18(1):32-37
[3] 徐德衍,林尊琪.光学表面粗糙度研究的进展与方向(续)[J].光学仪器,1996,18(2):35-41
[4] 孙艳玲,谢铁邦.基于垂直位移扫描工作的表面轮廓综合测量仪[J].湖北工业大学学报,2005,20(5):125-127
耿东锋, 何英杰, 苏宏毅. 透明台阶的白光干涉测量方法研究[J]. 光学仪器, 2013, 35(6): 74. GENG Dongfeng, HE Yingjie, SU Hongyi. Study on the measurement of transparent step by white-light interferometer[J]. Optical Instruments, 2013, 35(6): 74.